Q:Gate valve DN65 what does that mean?

Nominal diameter 65 gate valve.This depends on the material of your valve, it is new material, it is to use the outer diameter to do the standard, specifications with 63.75, and so on, because the new material is welded or coated with glue connection. So use the outside diameter as the standard, or the gap will appear.There is also the metal standard, according to the nominal diameter, or flange connection flange and skein skein are industry specifications.When it comes to the end, it must be between the pipe and fittings must be connected.

Q:What does Z941H-25DN250 mean by electric gate valve (excluding electric equipment)?

Cast steel flanged gate valve 25 pressure bore 250

Q:What is the wedge type gate valve wedge is what mean

According to the gate can be divided into the form of parallel wedge type. (1) wedge type gate. Wedge type gate the sealing surface of a certain angle with the vertical center line of the gate, the size of angle depends on the medium temperature and diameter size. General medium temperature is higher, and the greater the inclination angle is bigger, in order to prevent the temperature change when the gate is stuck, unable to open. Wedge gate sealing than the parallel well.

Q:What is the difference between the model z81x-16q and z81x-16c of the groove gate valve?

Not 16qIs 16p, the former body is stainless steel, and the latter body is carbon steel

Q:What does the gate valve 150# mean? Is it stress PN? What's that, PN16 or?It's better to have some specific links, thanks!

It's the stress PN, the 2.0MPA150# is the ANSI standard -- American National Standards InstitutePN is nominal pressure

Q:Why does the fire hydrant box in the air defense area need to be added with gate valves?

Code for design of basement for civil air defence GB50038The installation and installation of the protective valve on the water supply line of the 6.2.13 air defense basement shall comply with the following requirements:OneWhen the water supply pipe from the entrance into, should be set up in the inner protective sealing door;

Q:Acid resistant alkali valve gate valve

Fluorine gate valve; material: carbon steel, cast iron; design standards: JB, GB, ANSI, BS, API, ISO, DIN, NFZ, lining valve;

Q:What are the differences between the gate valve and the cut-off valve?

Is the gate valve opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, is not suitable for regulation and throttle. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used wedge gate valves form a wedge. The wedge angle varies with valve parameters, usually 5o. Wedge gate valve can be made into a whole, called the rigid gate; can also be made to produce micro deformation of ram, in order to improve its process of deviation, make up the sealing surface angle in the process, the gate is called the flexible gate. Valve closed, the sealing surface can only rely on medium pressure to seal, that is to rely on medium pressure to the gate sealing surface pressure to the other side of the seat to ensure the sealing surface seal, which is self sealing. Most of the valve is forced seal, that is, when the valve closes, to rely on external force to force the gate to the seat, in order to ensure the sealing surface sealing.A stop valve is a valve that closes the valve and moves along the center line of the valve seat. According to this form of valve movement, the valve seat opening change is proportional to the valve stroke. Because of the valve stem to open or close the trip is relatively short, but very reliable cut off function, and because changes in the valve seat and the valve stroke is proportional, is very suitable for flow regulation. As a result, this type of valve is ideal for use as a shut-off or regulator and throttling

Q:What are the meaning of the cast rigid gate valves z41h-16c?

According to the provisions of the JB/T 308-2004 valve type programming method:Z== gate valve4== flange connection1== rigid single gateH== sealing surface material: Cr13 stainless steel16== pressure rating: 1.6MPaC== body material: carbon steel

Q:What is the difference between the cut-off valve and gate valve, the general will use the cut-off valve instead of gate valve

Yes. Globe valves and gate valves are indeed common in certain piping and operating conditions.