Q:What does Z941H-25DN250 mean by electric gate valve (excluding electric equipment)?

Cast steel flanged gate valve 25 pressure bore 250

Q:The difference between cut-off valve and gate valve

Structurally, the gate valve for the gate, down to the front and back seat seal; globe valve with spherical, taper and flat spool, down to the valve seat seal. Functional stop valves are generally used for pressure flow control. Gate valves are used for isolation.

Q:What are the advantages and disadvantages of flat gate valves?

The advantage of flat gate valve is that the flow resistance is small, and the flow resistance is similar to the flow resistance of short valve. The flat gate valve with guide hole is installed on the pipeline and can be directly cleaned with the cleaner. As the gate is sliding on the two seat surface, the flat gate valve can be applied to the medium with suspended particles, and the sealing surface of the flat gate valve is actually positioned automatically. The seat seal surface is not subject to thermal deformation of the valve body. Moreover, even if the valve is closed in cold condition, the thermal elongation of the stem will not cause the seal to be subjected to overload. The length of the structure is much shorter than that of the ball valve, and it is easier to start. Light plate gate valve is more refined, but the effect is exactly the same.The disadvantage of flat gate valve is that when the medium pressure is low, the sealing force of the metal sealing surface is insufficient, so as to achieve satisfactory sealing. On the contrary, when the medium pressure is high, if the sealing surface is not lubricated by the system media or foreign media, often opening and closing may cause the sealing surface to wear too much. Another disadvantage is that the circular motion of the circular gate in the circular flow, only when it is at the valve closed position of 50%, this valve is more sensitive to flow control. Moreover, the gate will produce severe vibration when it breaks the high-speed and dense medium flow. The valve seat can also be throttled if the seat is made of a V - shaped opening and is tightly oriented to the gate.

Q:What are the standards for the execution of cast iron dark pole gate valves?

They are also standard in the production of cast iron dark rod gate valves:Design and manufacture: as per GB/T12234-89 regulationsLength of structure: as specified by GB/T12221-89Flange dimensions: as specified in JB79 GB/T9112-9131Inspection and test: as specified in JB/T9092-99 GB/T13927-92Drive mode: manual, electric, gear drive

Q:what are their applicable conditions? Advantages and disadvantages?

The gate valve is one of the simplest valves. Generally manual, most of the electric valve failure, as a manual. Butterfly valve is more, I saw the pneumatic butterfly valve, that is, with gas control closed, general and solenoid valve matching.Without strict conditions and advantages and disadvantages, of course, the equipment requires a relatively high degree of automatic control. I can check it out on Baidu.

Q:What does gate valve DN80-PN16-QT450 mean?

DN80 means: liquid, internal thread connection, the valve sealing surface material for rubber, seat sealing surface material for lining adhesive, nominal pressure of 10 kg / cm2, nominal diameter of 80mm Iron Butterfly valve.

Q:How to distinguish between gate valve and cut-off valve?

The shape is relatively simple and the casting process is better.The valve is used in the system is relatively large, to close the gate off system; and the valve is used in the system is relatively small, and to adjust the flow quantity of the system, can not be closed gate and globe valves of different specifications for many kinds of occasions, the valve rod valve the dark bar gate valve, wedge gate valve, single valve, multi valve valve body structure is different, large volume. Generally large and nominal caliber DN50 mostly with gate valve, especially industrial high temperature, high pressure, highly toxic and so on.Stop valve is able to stop and adjust flow, small footprint, small size, generally less than the nominal diameter, DN50 occasions use it.

Q:What valve is z45w gate valve?

Cast iron gate valve with turbine head, please contact me

Q:Which is more expensive, bronze gate valve or brass gate valve?

But the obvious weakness of brass is its poor strength, relatively large volume, and its lack of corrosion resistance.

Q:Is the gate valve clockwise or closed?

Usually it's off. There are some special occasions. It is said that the plane uses a lot of counter