Calcium Silicate Fire Board

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Calcium Silicate Fire Board

These are high quality building materials. The board contains inorganic raw materials.such as cement, silica powder and reinforced cellulose fiber as the main materials.All boards are autoclaved to become stable product. Fiber cement.board does not contain any of asbestos, however, it has strong bending strength like those with asbestos. Fiber cement board can be applied not only for the interior use but also for the outdoor wall system. It has low water absorption rate and high impact resistant ability. These good advantages make it suitable for any purposes of applications.

Features:
1) 100% non-asbestos
2) Density: 1,000 - 1,400kg/cbm
3) Coefficient of thermal expansion: 0.24W/MK (JC/T54)
4) Bending strength: over 13MPa (GB/T7019-1997)
5) Linear expansion rate: 0.1%
6) Water absorption rate: less 0.19% (GB/T7019-1997)
7) Water penetration rate: 0%
8) Water content: 10%
9) Incombustibility according to CNS 6532 and BS 476 standards
10) Two point five three hours of fire rating for 6mm wall system with W-CSP
concrete
11) Radioactivity: GB6566-2000 standards
12) Characteristic: nonflammability A grade (GB-8624-1997)
13) Light weight
14) The wall is solid and firm inside, resistant to impact pressure
15) Painting, tiling and nailing is possible in the new system
16) Noise reduction can be up to 46dB
17) Good efficiency
18) Working environment can keep it dry and clean for better management
19) Applications: can be used for partitions, interior walls, pipeline and conduit
compartments, stair space, exterior walls, ceiling boards and pillar wrapping.



Our products

Fire Rated Calcium Silicate Board


Package

Fire Rated Calcium Silicate Board


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are the high temperature resistant insulation materials at 400?
According to the general rules of equipment and piping insulation, heat insulation material is a material with a thermal conductivity of less than 0.14W/ (m*K) when the average temperature is equal to or less than 623K (350 degrees Celsius). Heat insulation material is usually light, porous, porous, small thermal conductivity characteristics. Generally used to prevent heat loss of equipment and pipes, or frozen (also known as general cold) and low temperature (also known as cryogenic) use, so in our country, insulation materials, also known as insulation or cold preservation materials. At the same time, because of the porous and fibrous structure of thermal insulation material, it has good sound absorption function, so it is also widely used in the construction industry.
Q:What are the new energy-saving building materials? What's new?
Heat insulation materials and insulation materials collectively referred to as thermal insulation materials.The commonly used thermal insulation material: mineral wool, rock wool, glass wool (in rock, slag as the main raw material, by high temperature melting, made by centrifugal methods such as cotton and thermosetting resin binder insulation products. ) foam plastics and porous polymers, expanded perlite and their products, calcium silicate insulation products, all kinds of composite insulation materials.Application of thermal insulation materials:(1) it is mainly used for thermal insulation of buildings, walls and roofs;(2) thermal insulation of thermal equipment and thermal pipe;(3) a large number of refrigerators and freezers are also used.
Q:Asbestos free calcium silicate board there is a crack in the kettle, what is the reason?
A slab of calcium silicate board production equipment to the emergence of the phenomenon of billet stick (stick billet refers to the calcium silicate board blank attached to the molding cylinder, in shaping cylinder knife when tearing into the surface depression caused by repeatedly feeding back, yield, effect in this case a two quality, three lead to rising production costs)There are two reasons for the phenomenon of sticking: first, the slurry temperature is low, viscosity is big; two, the material is not dehydrated enough, and the moisture content is high.The solution is: 1, improve the slurry temperature, slurry concentration decreased, but the slurry temperature should not exceed 45 DEG C; 2, in the premise of not causing product layer under the vacuum degree increasing, strengthen dehydration, reduce water blanks.
Q:What is dew point of thermal insulation material?
The heat insulation lining has the characteristics of low thermal conductivity, small density, high flexibility, fire prevention, waterproof, etc..Light weight, 10 96kg/m3, 20kg/m3 following mat, 24 48kg/m3 as in hard, 48 96kg/m3 as core, which 48kg/m can fand a softening point of the ceiling, 500 degrees C, 300 degrees C insulation, the larger the amount, k=0.9.Calcium silicate insulation product was successfully developed in 70s. It has the characteristics of high compressive strength, small thermal conductivity, convenient construction and repeated use. It has been widely used in power systems.Most of the domestic universal small workshop production, have been imported from the United States after the four production lines, advanced technology, instant rejection speed fiber, dry needle felt, stable quality, high temperature 800 to 1250 DEG C.Features: acidity derivative of more than 2, high temperature resistant, general chemical pipe 1000 degrees C more, must use this material. The temperature is about 2000 C.
Q:What's the use of white portland cement?
White portland cement as the raw meal with the proper components till the partial melting of the calcium silicate as the main ingredient, the iron content in clinker less addition of gypsum, white water ground made of rigid cementitious material. When grinding cement, allow limestone not to exceed 5% of the cement weight. White cement is mostly ornamental, and its manufacturing process is much better than ordinary cement. The gap is mainly used to hook white tiles, is generally not used in the wall, the reason is not high strength. It is available in the building materials market or decoration materials shop.
Q:What heat preservation material is used for thermal insulation of steam pipe in power plant? How thick is the bag? Please advise!
Superfine glass wool insulation rockwool, steam pipe rubber board, aluminum silicate, calcium silicate products, such as polyurethane insulation form, in the application, to see the price, there are commonly used rock wool and polyurethane, rubber board, the price is relatively low, the thickness of rock wool 65, is the most thin.
Q:What's the use of low carbon steel insulated nail hooks for power plants?
Mild steel is a type of carbon steel, and its carbon content is between 0.1% and 0.3%. The so-called carbon steel is also called carbon steel, refers to the carbon content of less than 2.11% of the iron carbon alloy. As we all know, the carbon content of the impact on the iron and carbon alloy is very large, the higher the content, the greater the hardness, but the smaller the toughness, and therefore easy to damage. Low carbon steel, because of its low carbon content, therefore, good toughness, low hardness, easy to carry out a variety of processing, such as welding, forging, etc.. And after some heat treatment, low carbon steel can obtain various properties, such as wear resistance, corrosion resistance and so on.
Q:What is the best price for the use of calcium silicate ceiling?
Neither calcium silicate nor silicate boards are afraid of water because they are mixtures of gypsum and fiber.
Q:Why is calcium silicate board unsuitable for use in home improvement?
Calcium silicate board is calcium silicate gypsum board, mainly with gypsum. At present, mainly 600*600MM, mostly used as large space, clear keel ceiling. But the family area is small, makes the Ming keel, the cost is high, also does not look well. This is why most families use a ceiling ceiling panels (gypsum board, calcium silicate board) ceiling.
Q:Cement is not silicate products
Usually refers to silicate products with lime (calcium containing materials) and sand, fly ash, slag (siliceous materials), then add a small amount of gypsum, the steam steam curing or steam curing, building products quickly generate Tobey mullite, calcium silicate, hydrated calcium aluminate sulfate and hydrated calcium aluminate such as cementitious materials and production. Such as: autoclaved fly ash (sand), autoclaved aerated concrete, autoclaved fly ash brick, autoclaved sand lime bricks.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range