scaffolding accessories ringlock rosette
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
1.Q235/Q345 cuplock system scaffold
2.hot dipped galvanized
3.Q235,Q345
4.For construction
5.Durable and
cuplock system scaffolding accessories/ cuplock scaffolding rosette
characteristic:
1.Surface treatment:Hot dipped galvanized
2.Material: Q235 for standards, Q235 for other components or as your request
3.Diameter: 48.3mm
4.Thickness of the tube: 3.25MM
5.Rosette: Q235, 10MM thickness
6.Components: Standard, Ledger, Brace, Metal Plank, Ladder, Base jack, Rosette, base collar
7.Standard with spigot, ledger and brace with forged connect point
8.Produced in our own factory,can control the zinc thickness much better
9.Port of loading: Tianjin
10.Samples are available
11.ISO 9001-2000 approved.
12.Performance:good bearing capacity,durable & stable
13.Test: SGS, BV or as per your request
14.OEM service is available.
ringlock scaffolding system standard/48.3mm * 3.2mm
Description | Dim(L)mm | Weight (kg) |
1.0m | 1000mm | 4.99 |
1.5m | 1500mm | 7.8 |
2.0m | 2000mm | 9.7 |
3.0m | 3000mm | 14.41 |
4.0m | 4000mm | 19.12 |
ringlock scaffolding system ledger/48.3mm * 3.2mm
Description | Dim(L)mm | Weight (kg) |
0.425m | 425mm | 2.3 |
0.638m | 680mm | 3.24 |
0.9m | 900mm | 4.05 |
0.935m | 935mm | 4.18 |
1.25m | 1250mm | 5.34 |
1.8m | 1800mm | 7.36 |
2.7m | 2700mm | 10.36 |
ringlock scaffolding system Diagonal /48.3mm * 3.2mm
Description | Dim(L)A*Bmm | Weight (kg) |
0.9m * 1.25m | 900mm * 1250mm | 6.28 |
1.25m * 1.8m | 1250mm * 1800mm | 8.6 |
1.25m * 2.7m | 1250mm * 2700mm | 11.45 |
- Q:What kind of piercing would you recommend a scaffold piercing in the ears cartlidge or a belly button piercing?
- I have both my cartilage and my belly button pierced. I love them both! Cartilage piercing was initially less painful until you had to turn it once a day during cleaning - that hurt a lot. Also, whichever side you get it pierced on - it will hurt SO bad if you sleep on that side. It takes around 8 months to a year to completely heal. Cost was $40. Belly button - It felt like a pinch when I got mine done. Clean this one 2x a day with sea salt soaks. Don't swim until it is completely healed. It takes 6-8 months to completely heal. Cost was $20 on half price piercing day - so it's usually $40.
- Q:This pome is scaffolded from a real poem, quot;Capricorn,quot; by poet/publisher TD Euwaite. The link gives guidelines.
- as both a sailor, (4 years AC) a traveller all my life and an adventurer i give you 4 1/2 stars for this work, i like imagery, and you capture that very well, controlling the picture but allowing the mind to fill in the other areas. the use of sails (ludicrous to the engineer, but i have read about solar sails before for flight around planets), finding your bunk, the first order of business on board any ship or in any military operation unless you are under fire (been there too, iraq 03) i like this work quite a bit, it captures well the life i think they would experience and enjoy if i can find 1/2 a star, i will post it to your credit
- Q:An 800N painter stands 3.00m from the left end of a scaffold that is 4.00m long. The uniform wooden scaffold weighs 100N and is hung by a chain at each end. What is the tension in each chain?A uniform meter stick weighs 25 N. An 80 N weight is hung at the 20.0cm mark. A 70.0N weight is hung at the 90cm mark. what is the magnitude of the upward force needed to balance the meter stick?Please help! I have a huge exam on these and my teacher wouldn't help me! I am so stumped please help!
- Required conditions for equilibrium (Other wise the scaffold is moving) Sum of forces = 0 Sum of Torques = 0 Sum of Forces Painter: 800 N DOWN Scaffold: 100 N Down Sum of tensions in chains = 800 + 100 = 900 N UP Sum of Torques (Pick one end, it does not matter which. I choose the Left end) Torque = Force * Lever arm Painter is 3.0 meters from Left end Tp = 800 N * 3.00 m = 2,400 N-m CW (Clockwise) Center of gravity is at the center of the scaffold or 4/2 = 2 meters from the Left enf Ts = 100 * 2 = 200 N-m CW This means that the chain on the Right end must supply 2400 + 200 = 2600 N-m CCW Tc = Fc * 4.00 m 2600 = Fc * 4 Fc= 650 N UP Total need up is 900 N====> 900 - 650 = 250 N in Left chain QED
- Q:What are the three scaffold scenes ? how can i discuss the importance of them?pleaseee helpp mee
- I'm not helping you with homework! Please categorize your question correctly!
- Q:What are the requirements for the erection of the bowl - shaped steel tube scaffold
- According to the specification requirements of every three vertical and horizontal cross set with scissors support; height of more than 8 meters in the low to vertical, vertical and horizontal set of scissors. Generally speaking, the technical requirements of the roof beam, the coupling beam parts are independent support, whether the existence of suspension.
- Q:In my mind it was and still is one of the most dangerous matches in wrestling history in my mind what's your opinion on the scaffold match?
- Jim Cornette Scaffold
- Q:Scaffolding and scaffolding, what is the difference between manufacturers, there is no professional answer?
- Different materials: scaffolding is mainly used in Q235 carbon steel tube, plate type scaffold is Q345 high strength low alloy structural steel.
- Q:What is a new type of scaffolding?
- Socket type steel pipe scaffolding is a continuous fastener type, bowl buckle scaffold after the upgrading of products.
- Q:Bowl buckle type steel pipe scaffold and full fastener type scaffolding are long what kind of? What is the difference
- In general, all scaffolding are used to build a bowl buckle scaffold, and rarely use fastener scaffolding to take
- Q:what physical properties on a molecular level does steel have that make it suitable for scaffolding.
- The most common properties include strength, yield strength, elastic limit, proportional limit, ultimate tensile strength, ductility, toughness, fatigue ratio, and loss coefficient. These all are present in the steel. #The basic materials for scafolding are tubes, couplers and boards.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
scaffolding accessories ringlock rosette
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords