Q:Angle valve what material is good?

All copper angle valve, alloy angle valve prone to corrosion, aging, 2 years of life, iron angle valve prone to rust, copper angle valve is the best, to buy brand goods, have heard of not buy

Q:How do I switch the angle valve?

Turn counterclockwise, turn clockwise, turn to turn off.

Q:Angle valve removal and installation

.Installation steps of single hole water tap:Step 1: remove all copper fixed base.Step two: screw the nut counterclockwise from the threaded pipe.Step three: hose, wear yellow spanner, nut, threaded pipe, silicone pad.Step four: cross the hose through the containers to be installed (sinks, basins, etc.) pay attention to: silicone pad in the vessel installation at both sides of each piece, and finally tighten, can be fixed more stable.Step five: the small end of the hose is screwed into the faucet inlet by hand and screwed until it is screwed. It does not need to be screwed by other tools.Step six: screw the threaded tube into the lower side of the faucet. The silicone pad on the side of the vessel can be placed under the faucet.Step seven: nut fixing faucet, screw nut can be tightened, installation completed.

Q:I'd like to have two water taps at the same time with a triangular valveI ask is there with a triangular valve three through the pipe (switch)? Three of course, and the triangular valve is usually two pass (a pass through the connecting pipe is connected with a water inlet, a), I want a triangular valve three way (through a connecting inlet are respectively connected with the 2, the other two pass a faucet. Do not know if there is no such triangle valve three way?The air force X | 2434 views

There is a water mixing valve with a cold hot two valves, but the water is also a.If you want two taps, just use three taps to connect the two taps.

Q:Bathtubs and angle valves are watertight, but how can water seepage?

Consider whether there is a resurgence of the phenomenon, but also that your hose is leaking, and then there is not careful enough to check you, and then look at the bathtub and launching device

Q:Is it necessary to use the hot and cold water valve in the gas water heater? Can I hold it? Can you direct the hot and cold water pipe directly to the water heater?The feeling of cold and hot water valve angle role is to regulate water more convenient, so a mixing valve at the end is not the same role?

Hot and cold water angle valve is not necessary, you can not, but mounted angle valve is to once there is a problem, you can use angle valve control, water leakage will not occur, the role of insurance.

Q:Does the basin faucet need angle valve?

The angle valve, buy a durable stainless steel. Recommend SENTO to Amoy this brand. Taobao can buy.

Q:Ball core large flow angle valve why the noise of water flow?

Ball valves are commonly used in industrial pipes switch valve, ball valve is more durable, frequency of operation and wear in the use of continuous improvement and upgrading. Angle valve in accordance with the spool form, the valve core for the ball, can also be classified as a ball valve

Q:Carlos warm water separator, ball valve or angle valve is not clear. How are the horizontal and vertical sections of the floor heating separator separated and closed?

Angle valve to cut off media, to facilitate the maintenance of terminal equipment, generally used for washbasin, kitchen sink, toilet water tank, water heater, cold and hot water inlet pipe. When an accident occurs in the water pipe or breaks and leaks after many years, then the angle valve is closed, which does not affect the normal water consumption at home and avoids economic losses.

Q:Dark valve. What is angle valve?

1, angle valve is also called "eight character valve", that is used to connect the seat, washbasin faucet, washing dish faucet switch valve.2, the dark valve is used to control the solar switch, and the double live ball valve is connected to the hot water pipe and pipe, or the connection between the prefilter and the pipe, will be eradicated in the future. The dark valve can be connected to the three pass.3, the difference between the dark valve and triangular valve is: half of the dark valve installed in the wall, angle valve installed on the outside.