1200T Short Cycle Hot Press Machine for Furniture Board
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 15 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1200T Short Cycle Hot Press Machine for Furniture Board
Products detail
Short cycle hot press machine is applicable for panel/ furniture plant or wood-based further processing to laminate decoration paper on particle board, MDF board with advanced technology.
Short cycle hot press machine is availale according to your requirements!
Features
Short cycle hot press machine is used to produce laminate board with a wide array of texture, from flat surface to light/deep emboss or synchronized grain engraving effects.
It is also suitable for laminating decorative paper,wearable paper and balance paper in both sides of HDF board to produce laminate flooring.
The applications (Short cycle hot press machine are for)
- Short cycle hot press machine for Laminating furniture board.
- The covering materials are melamine paper, veneer etc.
- The core boards are MDF / HDF / Particle Board.
Short cycle hot press machine Production line A&B
:
Specification
The technical parameters of Short cycle hot press machine :
| Type | Size (ft) | Nominal Pressure (KN) | End Panel Size (mm) | Working Pressure (kg/cm2) | Main oil cylinder (Diameter×Quantity) |
| NYJ-900T | 4×8 | 9000 | 1220×2440 | ≤30 | Φ280×6 |
| NYJ-1200T | 4×8 | 12000 | 1220×2440 | ≤40 | Φ320×6 |
| NYJ-1400T | 4×8 | 14000 | 1220×2440 | ≤47 | Φ340×6 |
| 5×8 | 1550×2440 | ≤37 | Φ340×6 | ||
| 6×8 | 1830×2440 | ≤31 | Φ340×6 | ||
| NYJ-1600T | 4×8 | 16000 | 1200×2440 | ≤53 | Φ380×6 |
| 4×9 | 1200×2750 | ≤47 | Φ380×6 | ||
| 5×8 | 1500×2440 | ≤42 | Φ380×6 | ||
| 7×9 | 2100×2750 | ≤27 | Φ380×6 | ||
Products display
Packing & Shipping
Package: Short cycle hot press machine will be packed according International MDF board hot press machine standard packing
Delivery : about 15 days after receive deposit payment
Certifications
FAQ
Q:What is the material of your products?
A:The main material are steels, oil cylinder and other. We can also choose material as customers’ requirement.
Q:How to control the quality ?
A:Inform you the new progress of the production in some certain time. You will clear imagine how yourmachine made from the raw material step by step.To make sure our salesman be your eyes and ears.
The Ex-work test. The ex-work including the Final assembly test, factory test and working performance test. Each machine no matter big or small must pass the Ex-work work before leaving the factory. We must gurantee everyone machine from CNBM workshop must be qualified . The vedio will be taken for the test, and welcome you to come to our factory for inspection.
Q:How can I kown more about the press machine?
A: We are honored to send you some pictures and vedio about our machine. And we welcome every customer visit our factory.
Q:How does your factory do regarding quality control?
A:Quality is priority. Factory director always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ZDHY, ISO9001 authentication.
- Q: After pressing F2 it asks for some password..while after pressing F12 gives the same screen again
- this mistake shows up if the device isn't able to come across the no longer undemanding force. for this reason, make certain that the no longer undemanding force is chosen because of the fact the 1st boot gadget. additionally, in case you have inserted any CD interior the CD force, make certain which you have rid of it, in the previous you boot the computing device. to alter the boot order, you would be able to desire to get admission to BIOS. as you haven't any longer presented the small print on the subject of the computing device type which you're utilising, i would be unable to offer you the appropriate steps to get admission to BIOS. in spite of the undeniable fact that, while you're utilising HP Pavilion computing device, to get admission to the BIOS, you would be able to desire to faucet the F10 key, as quickly as you boot the computing device. if the subject isn't resolved even after changing the boot order, then you definately would desire to reinstall the OS, meaning, all the archives would be misplaced. ============== it is extremely imp to appreciate the type variety of the computing device and no remember if restoration CDs have been bundled or abode windows OS CD have been bundled with the computing device. If restoration CDs got here bundled with the computing device, then you definately wont be waiting to apply the abode windows OS CD to repair the OS (till, you're utilising a retail version OS and not OEM version.) yet whilst abode windows OS CD grow to be bundled, then you definately would desire to objective repairing the OS.
- Q: My clothing requires permanent press during washing, but my washer does not have a permanent press option. Could I use Delicate and achieve the same results? If not, what should I use?
- You can use the delicate cycle. Just make sure you use the temperature of water it recommends on the washing tags of the clothing.
- Q: I have a 2000 Mazda Miata and up until recently it has functioned perfectly. Recently it started to make a squealing sound when the clutch was pressed. I noticed the sound would go away as soon as the car warmed up. Now however the problem has leveled. The car now stalls every time i press the clutch. If I press the clutch it makes that squealing noise until stalling the car. I have not driven it since it stalled on me. My question is what is causing all of this mess? and am I pretty much at the point of no return? Will I pretty much have to replace my whole transmission?
- More then likely the problem is either the throw out bearing or the pilot bearing. Because this is just as much work to fix as a complete clutch job, do a complete clutch replacement. Think about getting a light weight fly wheel if frees up some torque/horsepower. But before you go that far- check the fluid level on the clutch cylinder or do this test- Start the car in neutral, depress the clutch and see if you can shift it into gear. If there is grinding or difficulty in getting into gear- then it is the clutch release system (often the slave cylinder).
- Q: I want to matte my face but don't want a heavy makeup look at all, and also don't want a product that will clog pores. Does anyone have any recommendations for powder that will make my face matte all day but not look noticeable? Also, which is better, loose or pressed?
- You need a matte powder. It doesn't matter pressed or loose. I have embarrassingly oily soon and these translucent powders work for me: Jurlique Citrus Silk finishing powder for all day matte. Kind of pricey though at 36 dollars. Hard Candy Welcome Matte on a budget 6 dollars maybe a touch up or two. If you have oily skin properly cleanse exfoliate tone moisturize and use plain milk of magnesia before powder. Lemme know if you need skin care routine.
- Q: My current favorite pressed powder is Loreal True Match, but I'm kind of wanting to try a new one. I'd rather it be from the drugstore, but if there's a really good high end one tell me about it.(: I'd also like it to have a decent amount of coverage.
- Maybelline Dream Matte Powder Maybelline Mineral Power Powder Dream Matte is a very popular powder. It has light coverage but keeps your face matte all day. Because of its light coverage, most people only use it as a setting powder. Mineral Power has more of a light-to-medium coverage, which is pretty good for drugstore. Most, if not all drugstore powders have light or sheer coverage. This is a good powder for either a foundation or as a setting powder.
- Q: Should the Press not report and not ask questions?
- Mr Romney has been unfairly maligned just because he only released 1/2 of one selected years tax returns, has made it clear that he will not answer questions unless his advisors see the question first, has TWO off-shore accounts, while his wife Ann has SEVEN off-shore accounts, down from the 138 off-shore accounts Bain used to avoid taxes, uses Executive priviledge to avoid talking about Bain, can't count on Mass. to vote for him, was involved in Olympic corruption and refused to take responsibility or talk about it, is guilty of a felony by misrepresenting his residency in his run for Gov of Mass. shoved food into his kids faces and humiliated them, set up phony charities to take a MASSIVE one time tax deduction with NO TAXES paid on $millions$ of dollars profit on Dominos Pizza Stock, while the only Good Works the charity does is funnel 5% to his Church (if that is what it is) and the charity pays his family members expenses and salary to run it...... .....actually, when I look at him.......he is an abusive scum bag.......
- Q: I really like to work my legs but I really want to know which I should work them on. The gym has a squat machine and a leg press machine. I do a lot more leg press because I can't do a lot of weight on the squat. So this is what I was thinking. Do reps on the squat, like 3 sets of ten with 200 lbs. And then do more of the heavier work on the leg press. Really I'm not sure what to do but I'd like to incorporate both machines in my workout. Can anyone help?
- Leg press is a great exercise, however the squats don't only work the leg. They also work the core. Right now your plan looks fine, but consider that the squat is a more compound exercise and will work several muscles.
- Q: check out this home made bench pressI currently don't have a job, so I can't buy weights, and I don't live anywhere near a gym. I have been using a box filled with flour packs (5lb. each) as a bench press weight.Do you think this would give a person almost the same results as a bench press? be honest
- I okorder and they talk about using nontraditional items for weights. Just be careful that what you are using doesn't cause you injury. When I didn't have any weights to use I would use a towel for resistance or I would grab a volume of the encyclopedia set. After having my daughter I would hold her and lift her up and down (there was a list of all types of post natal exercises that I read somewhere that involved play with your child and providing you exercise). But basically, yes you can use that to help provide needed resistance.
- Q: I've been lifting for about 16 months now, im around 6'7 265.My bench press max about 6 weeks ago was around 235x1 and now im having trouble just doing 205 once. I lift 4 days a week(day 1 chest and day 4 arms). My chest is still getting stronger and size is increasing just not my weights. My leg strength is going up significantly compared to my chest. I eat pretty good 3 meals a day and take protein shakes, and drink lots of water while lifting. My chest routine is Bench press(x10,x8,6,4) and then incline (x10,x8,x6,x4), Dumbell flyes 4 sets until failure, 4 sets of dips until failure, shoulder press (x10,x8,x6,x4) Upright row(x14,x12,x10,x8), front raises(x14), laterials(x14, and then 4 sets of dips until failure. Any tips will be well taken.
- Make sure you're eating enough so that your weight isn't going down. Don't bother with the dumbbell flys/upright rows/front raises/lateral raises as they will have no effect on your bench press, and as long as your bench press is going up then your mass in the chest/front shoulders/triceps will grow. Lower rep training will be more effective for gaining strength in the bench press, give 5x5 a try. Make sure you're attempting to increase the weight on your bench press every workout, and if you're stuck at the same weight then deload it and gradually build back up again to break through the plateau. Do pulling exercises as well as pushing exercises or your bench won't progress well and your shoulder health will be poor, make sure you're progressing on rows and chin-ups also.
- Q: I tighten the belt as much as I can (sorta hard to adjust) but it still jams. It's an inexpensive mastercraft 10 model. The belt looks fine to me but I don't know what to look for. It jams a lot, almost unusable with a 7/8 forstner bit. Really annoying. I would definately get a new belt if I thought that was it. I think it didn't jam as much when it was new. The other day the belt just came off while running for no apparent reason (it was plenty tight). Thanks for any help anyone can suggest. Could it be alignment?
- I don't know what you mean by jams. I'm a machinist for over 24 years. e-mail me with better details and I know I can help
Send your message to us
1200T Short Cycle Hot Press Machine for Furniture Board
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 15 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
