Thermal Insulation Fiber Glass For Building Roofing and Wall25KG/M3
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 400 roll
- Supply Capability:
- 10000000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Glass Wool are widely used in public, commercial and residential buildings as well as industrial plants, for applications such as roofing, external wall, partition wall and floating floor to provide fire protection, thermal insulation, acoustic control and condensation control.
Item | Unit | Index |
Density | Kg/m3 | 10 - 48 |
Thickness | mm | 25-150 |
Width | mm | 1200 |
Length | mm | 5000-30000 |
● FEATURES
● Thermal Insulation ● Fire Safety ● Acoustic Control
● No Corrosion ● Environmental friendly ● Moisture Resistance
● Energy Conservation & Emissions Reduction
Standard Size
Blanket
Size: W*L (mm) 1200X10000 ( 10000- 30000)
Thickness (mm) 25, 30, 50, 60, 80,100
Technical Data
Item | Unit | Index |
Average Fiber Diameter | μm | About 7 |
Water Content | % | ≤1 |
Grade of Combustibility | Non-Combustible Grade A | |
Thermal Conductivity ( 25℃) | W/mK | 0.038- 0.045 |
Reshrinking Temp | ℃ | ≥300 |
Hydrophobic | % | ≥98 |
Moisture Rate | % | ≤5 |
Noise Resistant Coefficient (NRC) | About 0.75 | |
Slag Inclusion Content | % | ≤0.3 |
DATA
Aluminum foil thickness: 0.035mm
Temperature range: -30°C~+140°C
Maxim Air Flow: 30m/s
Maxim working pressure: 2500 pa
- Q:What's wrong as the glass wool pipe is too soft?
- Nothing is wrong.
- Q:Are rubber and plastic thermal insulation material and glass wool in air conditioner energy-saving materials ?
- They are energy-saving materials, and thermal insulation materials which can reduce the heat exchange with the outside world of the system and improve efficiency.
- Q:What's the difference between rock wool board, glass wool board, glass wool felt?
- First question: These three products are used for thermal insulation in roof and wall surface, ship, equipment respectively. Second question: specifications: Rock wool board: 1000 * 630 1000 * 600 1200 * 6001200 * 630 Density is 60-100KG / M3. Imported and exported density is 60-100KG / M3. Glass wool board: 1200 * 600 density: 20-40KG / M3 Glass wool felt : width:1200 density:10-30 [For exoprt] Third question: They can all reach Class A non-combustible. Fourth question: Rock wool board is waterproof and fireproof while glass wool is only fireproof. Fifth question: They can all use tinfoil. Glass wool felt needs to be vacuumized because it has low density. [These are what customers need. ] Sixth question: Add me, and I will inform you the latest changes. Seventh question: It can be used in other ways. Contact me for pecific price.
- Q:Are there any differences between glass wool and rock wool in terms of appearance, I can't distinguish them, why?
- They have different colors
- Q:What's the heat conductivity coefficient of Kunnai glass wool blanket?
- Between 0.03-0.06, generally the lower the heat conductivity coefficient is, the better the thermal insulation effect is.
- Q:How effective is fireproofing glass fiber cotton?
- It will be scortched if it directly contact with flame. Usually the thermal insulation and heat perservation performance is good.gypsum board, gypsum fiber boards, cement particle board, mineral wool sound-absorbing panels, glass wool decorative sound-absorbing board, perlite decorative sound-absorbing board, flame retardant plywood, flame retardant fiberboard with medium density, rock wool decorative panels, flame retardant wood, aluminum foil,
- Q:What is the difference between glass wool and rock wool insulation board insulation board ?
- glass wool and rock wool insulation board differs in their performance. Glass wool has lighter unit weight, lower shot content and thermal conductivity, longer durable years, higher fiber tensile strength. And the maximum temperature that the rockwool can endure is about 600 degrees Celsius while the glass wool is only about 260 degrees Celsius. if it is used for general building insulation or low temperature pipe, you can use glass wool, if it is used at parts where the temperature is about 500 degrees Celsius. rockwool is better. I hope my answers above are helpful to you and your ideal anwers.
- Q:Who knows the construction scheme of external wall thermal insulation glass wool ?
- Glass wool external wall thermal insulation construction scheme 2 main material preparation: A, glass wool insulation board (80mm thick) (30mm thick) B, anchorage (8X120) mm plastic rose nail C, sample plate. This place belongs to south podium buildings, where large-scale construction can only be carried out after checking and confirming of supervision main contractor from Party A . 3.6 Pre-construction preparation 3.6.1 Set control lines in necessary parts of the building external wall internal and external corners, holes and deformation joints and rustication. Snap the horizontal ink line on the holes of door and window, and the glass?wool?board in first procedure while controling levelness in construction. Set the horizontal control line in places with two vertical control lines to control the flatness in construction of glass?wool?board. 3.6.2 Except for the solid wall, the wall surfaces should be coated with cement mortar and the flatness, intensity and verticality of mortar surface should meet the requirements of relevant specification. Base plane should be smooth, firm, dry, clean, water and alkali resistance, chalking resistance, PH value
- Q:Are thermal insulation glass?wool?boards hydrophobic?
- Do not believe any hydrophobic agents. Products being processed with silicone hydrophobic agents have a short hydrophobic phase, and the performan of which has no guarantee. The thermal insulation performance of A-level glass wool products are poor which may lead to inferior wallboard engineerings.
- Q:Does curtain wall glass wool belong to thermal insulation wool?
- Glass wool is a kind of spongiform material shaped by making melten glass fibering, it's chemical content belongs to glass and is a kind of inorganic fiber. It has good molding, small bulk density, low thermal conductivity, good thermal insulation and heat insulation, good sound absorption, corrosion resistance and stable chemical performance. Ultilization of entrifugal glass wool in the construction, the surface is likely to be added with a layer of finishing with certain acoustic function, such as plastic film less than 0.5 mm, metal wire mesh, window screening, fire prevention cloth, glass fiber cloth, etc., it can basically keep the original sound absorption characteristics. Aluminum foil glass wool, centrifugal glass wool have fine features, such as fire prevention, heat preservation, easy for cutting and is one of the most commonly used material in building sound absorption. But because of the decoration lacking of centrifugal glass wool surface, and there are diffused fibers, it must be made into all kinds of hidden acoustic components. The most commonly used and cheapest structure is the suspended ceiling of dry wall or the perforated wall side of centrifugal glass wool as inner filler. Hope my answer will be helpful to you!
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Thermal Insulation Fiber Glass For Building Roofing and Wall25KG/M3
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 400 roll
- Supply Capability:
- 10000000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products