Power Cable Copper Power Cable XLPE Insulated Power Cable

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
100 m
Supply Capability:
20000 m/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1: Standard of production

The product is manufactured according to the standard of GB/T 12706-2002,IEC,BS,DIN and ICA upon request.

————————————————————————————————

2:Main application

The product is suitable for use in power distribution lines or fixed installation with rated power-frequency voltage up to and including 0.6/1kv.3

————————————————————————————————

3:Working temperature and installation condition

Rated voltage of industrial frequency:U0.6/1kv

2 The cable conductor allowed to work temperature should not be higher than 90°C

3 During having a short circuit, lasting less than 5 seconds, 

————————————————————————————————

4:  Laying Method

There is no limit of head drop during the cable laying.

The cable may be laid in indoor, outdoor, 

The single core cable mustn't be laid in the magnetic metal pipes.

The environment of cable laying shall be in good heat dissipation condition. 

Power Cable Copper Power Cable XLPE Insulated Power Cable

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:EVGA 8800gs Power Cable Confusion?
You can plug the standard 6 pin from your PSU the way it is and play a game and if the pc freezes or shuts off during game play then you know wehre the problem is. Do not worry about the exact specifics it wants. If you put the two 4 pin molex connections in so you can use one 6 pin then that might be more reliable as far as power flow but only do that after you try the standard 6 pin because of your limit on availible 4 pin molexs
Q:I want to put a switch in a power cable heading to USB Hub?
Before you attempt this, make sure you have the following items: -Wire strippers -Electrical tape -Two terminal switch -Scissors IMPORTANT! make sure that the cable is unplugged from the computer and the hub before you do this! 1st, cut the cord halfway with the scissors. Next, remove the outer wire insulation from the two new ends you just cut with the wire strippers. Now strip the small colored wires that are now exposed. Then connect the red wire from one half of the cord to a terminal on the switch. Do the same with the other red wire from the other half of the cord and connect it to the other terminal on the switch. Strip the other small wires and connect them back to their appropriate colored wire. Finally, wrap each wire individually with electrical tape, then wrap the entire gap in the cord with it. Now plug the cord in and try it out!
Q:power cable for an amp?
Of course you can. As many amps that I have installed I have only had to drill one hole through the fire wall. As long as there is a grommet you are good to go. You should be able to open the rubber up with a screw driver. Just be careful not to damage any wires.
Q:How to effectively reduce the cost of car wiring harness?
5 °), a simple algorithm is 100 high bridge, for example, isosceles triangle bottom length of 76
Q:electric power cable outside?
I do not know the codes or regulations in Chicago but i do know in most states it against the law to have power lines resting on a structure. Those two lines resting on the garage could be the cable and phone company's and that is not against the law. However you could call the phone company and cable company and ask them to move them for you. If you can make a valid point that those lines are causing you harm or disturbing you in anyway possible then the company's will have to move it. And for the power cables there is probably nothing you can do unless it is really resting on your garage. But they will just tighten the line and not actually move it.
Q:Help in English:do these expressions have exactly the same meaning?
A cable is usually thicker than a cord. When I hear power cable, I tend to think of industrial machinery.
Q:Is it OK to run 1/0 gauge power cable along my speaker wire??
Yes, it's ok. In fact, it wouldn't matter if it were RCA and the power wire, that's a myth. I quote, Technically, running your RCA wires and power wires shouldn't cause any problems and can be dubbed a myth. However, a lot of people will disagree. For induction between power and signal wire to occur, a form of AC (with some current) must be introduced on the DC power wire. The added signal through the power cable doesn't have enough current to do this. Alternator whine comes from poor (or damaged) filter circuits in the HU. A induction type filter to the HU is an easy cure.
Q:Power cable 5-color line, respectively, what color, what role?
YJ: XLPE insulation V: PVC sheathed 22: steel tape armor 8.7 / 15KV: rated voltage: 8.7 / 15 kV (phase voltage 8.7 = 15 / 1.. line voltage 15kV) 3 * 300: Three conductor cross-section of 300 square copper conductor Another: If YJLV is the aluminum core. Here is not marked what the material is conductor, you can default to copper conductor.
Q:Will my power cable burn my modem?
Get the proper supply. It will be easier on it. With that supply, it could overheat and prematurely fail.
Q:With the patch panel how to deal with the line corresponding to the crystal line of the line order is what
In fact, this is obviously three single-core 240 cable plus two single-core 120 cable, which is a total of five cables, I hope you do not understand, then do not mess up, so as not to

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range