MET COKE SIZE OF 30-80MM

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
1000 m.t.
Supply Capability:
100000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1. Structure of Metallurgical Coke of MET COKE SIZE OF 30-80MM Description:

Sulfur content in coke: sulfur is one of the harmful impurities of iron smelting, it lower the quality of cast iron.The sulfur content in pig iron for steel making is more than 0.07% for the trash.By the blast furnace burden into furnace sulfur 11% came from the ore;3.5% from limestone;82.5% from coke, so coke is the main source of sulfur in charge.Coke sulfur content directly affect the blast furnace ironmaking production.When coke sulfur content is greater than 1.6%, sulfur, every 0.1% increase in coke consumption increased by 1.8%, increased by 3.7%, for the amount of limestone ore content of 0.3% by 1.5 - a 0.3% increase in the blast furnace production. The sulfur content of metallurgical coke is not greater than 1%, large and medium blast furnace using the sulphur content in metallurgical coke is less than 0.4-0.7%.


2. Main Features of the Metallurgical Coke of MET COKE SIZE OF 30-80MM:

• Quality assurance

• Mutual benefit

• Preferential price

• Various choice

3. Metallurgical Coke of MET COKE SIZE OF 30-80MM Images:

 

MET COKE SIZE OF 30-80MM

MET COKE SIZE OF 30-80MM

MET COKE SIZE OF 30-80MM


4. Metallurgical Coke of MET COKE SIZE OF 30-80MM Specification:

 


 
 The average heat capacity is 0.808 kj/(KGK) (100 ℃), 1.465 kj/(KGK) (1000 ℃)
Thermal conductivity is 2.64 kj/(MHK) (room temperature), 6.91 kj/(MHK) (900 ℃);
Ignition temperature (air) is 450-650 ℃;
Low calorific value of dry ash-free basis for 30-32 kj/g;

 

 


5. FAQ

The coke of phosphorus points: metallurgical coke ironmaking use phosphorus content should be below 0.02-0.03%.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Ca3 (PO4) 2, SiO2, coke and other raw materials for the production of silica gel (SiO2? NH2O), phosphorus, phosphoric acid and CH3OH, the comprehensive utilization of raw materials in the following process
(1) according to the definition of replacement reaction, there are two kinds of compounds in the reaction of II, contains two kinds of compounds in the product, so it is not the replacement reaction of reactants, IV no elemental, so it is not a replacement reaction, V reaction is a chemical reaction, I and III reaction with replacement reaction conditions, so is the replacement reaction,
Q:Various types of coal coke are the main test items
If you need to test coal, caking index (G value), glial layer (X, Y) and other indicators, the index also includes the detection of more coal ash melting point (ash melting), hydrocarbon, the Hardgrove grindability index of coal, burning, swelling, activity, Oaxaca coal coal. Slag index.
Q:The coke is divided into several separate uses
Types of cokeCoke is usually divided by use of metallurgical coke (including blast furnace coke, coke and iron alloy coke etc.), coke and calcium carbide with coke gasification. The utility model is characterized in that the coal is formed by the compression of the coal powder, and a new type of coke, which is processed after carbonization, is called a coke.
Q:With the number of 1 tons of steel smelting coke
The use of coke pig iron smelting blast furnace, for each different, which is each blast furnace coke ratio (the ratio of the iron smelting a ton of coke by iron determined how many meals). The country or the world, the iron and steel enterprises coke are not the same, the coke rate is as low as possible, but there are many factors which restrict the level of coke, such as advanced level equipment, raw material and fuel quality, or the operator level, advanced process and so on many factors which influence
Q:What does Coke test index M25 mean?
. Coke crushing strength refers to coke can resist foreign impact force without ability along cracks or defects at the broken, represented by the M40 value; wear strength of coke coke refers to the ability to resist external friction without surface of glass forming debris or powder, said M10. The cracking degree of coke affects the M40 value of its breaking strength, and the pore structure of coke affects the M10 value. There are many methods for determination of M40 and M10, our method using migon drum test in Germany.
Q:How coke is involved in steelmaking,
Molten iron is produced in a reducing atmosphere of the blast furnace, which is then supplied to the steelmaking plant for steelmaking.
Q:How much coal can a kilogram of coal weigh?
The ratio is about 1 to about 0.7, that is, about 1 kilograms of coking coal can produce a total of about 0.7 kg of coke
Q:Coke crushing equipment prices, manufacturers offer is how much
The index of pore structure is mainly expressed by the porosity rate (the percentage of the total volume of coke), which affects the reactivity and strength of coke. Different uses of different coke porosity index requirements, the general requirements of metallurgical coke porosity in the 40 ~ 45%, 35 ~ 40% in coke, coke export demand in about 30%.
Q:Coke coal charcoal are used for what
Charcoal:1 metallurgical industryIn the past, the charcoal was used to smelt iron ore, and the pig iron was melted by charcoal and coke. The structure and mechanical properties were not the same even if the chemical composition was the same. The charcoal smelting pig iron generally has the fine grain structure, the casting is compact, does not have the crack the characteristic, the pig iron with the charcoal production contains the impurity is few, is suitable for the production high quality steel. Due to the reduction of charcoal, so in the metallurgical industry can be used to restore ore smelting metal.In the non-ferrous metal production, charcoal used for surface flux, non-ferrous metal melting, the surface flux in the molten metal surface protective layer, so that the separation of metals and gases, can reduce the loss of molten metal splash, and can reduce the melting material in gas saturation.A large amount of charcoal is also used to produce crystalline silicon, silicon used charcoal ash production should not contain too much carbon and head.
Q:The reaction of the blast furnace ironmaking is the reduction reaction: the coke produces CO in the furnace,
Please see standard: metallurgical coke GB/T1996-2003, all clear

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range