Hydrualic Breaker for 18-26MT Excavator Power Tool

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
1 unit
Supply Capability:
100 unit/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Hydrualic Breaker for 18-26MT Excavator Power Tool

We specialize in the research , design, manufacture and marketing of hydraulic breaker, quick hitch, hydraulic grapple, hydraulic shear and other attachments. Meanwhile, we also supply spare parts of our products and after-sale service. Besides, we are able to offer the customers construction solutions as well.

 

Advantage:

1. Strict procedure quality supervising, test each product before shipment.
2. Certified by CE and ISO9001:2008.
3. Self-research for most spare parts.
4. OEM is accepted.
5. Reasonable price with fine qulity.

 

Description:

Hydraulic rock breaker is powered by an excavator or loader pump provides pressure oil, it can dig a fundamental role in building a more efficient clean up floating rock crevice in the rocks and soil. Optional hydraulic hammer excavator model is based on the principle of the operating environment to choose the most suitable hydraulic rock breaker

Hydraulic breaker has become an important tool for the job, it was installed in the hydraulic breaker backhoe loaders (also known as two busy) or wheel loader for crushing operations. Excavator Hydraulic Breaker, also known as hydraulic breaker or hydraulic rock breaker (Excavator Hydraulic Breaker).

 

 Specification:

Exvacator breaker technical paramaters

TRB680

TRB850

TRB1000

TRB1350

TRB1400

TRB1550

TRB1650

TRB1750

Weight
(kg)

258

557

753

1653

1774

2569

2752

3912

Length
(mm)

1415

1735

1994

2367

2414

2760

2816

3176

Required oil Flow
(L/min)

40~70

60~100

80~110

120~150

130~1800

180~240

200~260

210~290

Working pressure
(kgf/cm2)

110~140

130~1640

150~170

160~180

160~180

160~180

160~180

160~180

impact rate

500~900

400~800

350~700

400~800

350~500

300~450

250~400

200~350

Hose Diameter
(In)

0.5

0.75

0.75

1

1

1

1.2

1.2

Chisel Diameter (mm)

68

85

100

135

140

155

165

175

Chisel Length
(mm)

700

900

1000

1300

1300

1500

1600

1600

Applicate Exvacator
(Ton)

4~7

7~14

10~15

18~26

18~26

28~35

30~45

40~55

 

Hydrualic Breaker for 18-26MT Excavator Power Tool 

Company profile:

(CNBM International) is the most important trading platform of CNBM Group Corporation, a state-owned company under the direct supervision of State-owned Assets Supervision and Administration Commission of the State Council.With the advantages in Cement, Composite Materials, New Building Materials and Engineering, We are enlarging sub-brand. Currently, we have wholly-owned overseas subsidiaries and branches in 5 countries with a view to realize localization. Meanwhile, we have established strategic partnerships with hundreds of domestic manufacturers and sound business relations with clients from over 120 countries. In line with the business, CNBM International launched E-business platform Okorder.com. It conformed the best resource and logistics to meet the customers’ request  with 24 hours full-time service.

 

FAQ:

1. Q: Can I get some professional suggestion?

A: Sure, we have professional engineer. Any question will be solved.

2. Q: Do you have the products in stock?

A : Yes , We have several models now could supply to you.

3. Q: What's the delivery time?

A: It usually takes about 25 days to produce an order. But the exact delivery time might be different for different orders or at different time.

4. Q: How does your factory do regarding quality control?

A: Quality is priority.  Workers always attach great importance to quality control from the every beginning to the end of the production. Every product will be fully assembled and carefully tested at important moment.

5. Q: Will you deliver the right goods as ordered? How can I trust you?

A: Yes, we will. Our company is world top 500, that is the biggest supplier and manufacture in China, having a good reputation around the world.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Service life of crusher hammer
When the new hammerhead is replaced, it is best to weigh it and divide it into several groups according to the average quality. The quality requirements of each group are equal, otherwise the rotor is unbalanced and vibration is easy to occur when the machine is switched on.
Q:The working principle of cone crusher
The cone crusher is working, the motor drives the eccentric shaft through the elastic coupling, drive shaft and a pair of bevel gears, crushing cone axis of the eccentric sleeve force under do swing movement, make the broken wall and rolling mortar wall sometimes close, sometimes far away from the ore, in the crushing cavity continuously by extrusion, impact and bending and is broken. More cone crushers can be referred to the Great Wall heavy industries for more information.
Q:The method and advantages and disadvantages of overlaying welding of jaw crusher
Overlaying characteristics of jaw crusher:(1) improve the crushing equipment parts (plate) the utilization rate of former pay per tooth plate can be used only 30 units, will be scrapped, occupied since the tooth plate can be subjected to continuous surfacing welding, each pay 140 units available, improve the utilization rate of up to 4 times.(2) cost is greatly reduced. The producer price of a manganese steel plate is 6 times more than that of the welded plate.(3) the tooth at the surfacing will not fall off until it is polished.3, crusher surfacing defects:The hardness and toughness are not enough, so the abrasion resistance still can not meet the requirement.4, jaw crusher welding should pay attention to:(1) the current at the time of surfacing shall be calculated by 45 amperes of 1 cm electrode (if 6 cm electrode is used, the current should be multiplied by 45 by 6 to 270)(2) the pig iron powder used for surfacing must be very clean, oil and rusty water can not be used.(3) when placing pig iron powder, it is best to block it on both sides, otherwise it will be easily separated when the arc is burning.(4) when welding the fixed tooth plate of the tooth, it should be noticed that there is a hole at the end of it, so the temperature should not be too high, otherwise it will crack easily.(5) of course, before welding, the plate will be heated below, the effect will be better.
Q:What is the working principle of jaw crushers?
In addition, in order to meet the requirements of different particle sizes and compensate the wear of the jaw plate, an adjusting device for the discharge port is added. The adjusting shim or wedge is usually arranged between the elbow plate seat and the back frame. But in order to avoid the replacement of broken parts and affect production, but also the use of hydraulic devices to achieve insurance and adjustment. Some jaw crusher also directly hydraulic drive to drive jaw plate, in order to complete the material crushing action. These two types of jaw crushers using hydraulic transmission are often referred to as hydraulic jaw crushers.
Q:The structure and working principle of rotary disk crusher
These characteristics of the disc crusher allow the user to benefit in the following areas:The bottom of production cost - usually disc crushing is used for crushing third or fourth segments (super fine section) of production system to realize "more crushing and less grinding" and lower production cost;The lining plate has little wear - the material is broken in the multi block and the lining of the lining is small;Uniform product - the product is always a uniform cubeManufactured sand - a rapidly expanding marketWith the natural sand reserves decrease, the market demand for more and more artificial sand or pebbles. Rock crushing or grinding, sieving and grading can be used as a building material made of artificial sand. Most of the raw materials are used as building materials in artificial sand can be used as raw materials.For gravel aggregate production of existing buildings, can increase the sales potential through the production of artificial sand by increasing crushing and sieving and grading equipment, almost every production building aggregate gravel factory can help gyradisc crusher to produce fine aggregate to meet the requirements. In most cases, sand production as a separate part. Gravel and sand making equipment can be together with the existing equipment, can also be completely independent of the existing equipment in production
Q:What are the characteristics of Barmac crusher
The main features are:1. The structure is simple and reasonable, self crushing and low cost;2 、 easy to operate and easy to install;3, unique rotor and cavity design, processing capacity and high rate of sand, the product shape is good, a round cube, material flow performance is good;4, smooth operation, small noise, high efficiency and energy saving, high crushing efficiency;5, unique bearing forms and advanced spindle design, so that the machine has heavy load and high speed rotating characteristics, can be broken in the hard, hard materials (such as corundum, sintered alumina, etc.);6, the production process, stone can form lining, self-protection, the body without wear, iron pollution is small;7, vortex cavity internal air circulation, dust less, easy to dust removal;8, a dual-purpose machine, change the crushing cavity liner (rock stone or stone timbewolves) form, can be easy to achieve in crushing and fine crushing and shaping function;9, unique observation door design, easy maintenance, easy to wear parts, made of special hard wear-resistant materials, small size, light weight, easy to change.
Q:Caterpillar crusher hb40g what does that mean?
And facilitate the coordination of all auxiliary mechanical equipment. By means of wireless remote control, the crusher can be easily reached to the trailer and transported to the site
Q:What's the difference between a jaw crusher and a cone crusher?
Jaw crushers, jaw plates, jaw plates, jaw plates, jaw plates and movable jaw plates are the wear parts of jaw crushers. They are square. The running state in the jaw crusher, jaw attached to a movable jaw plate made of compound pendulum movement, the formation of a stone with a fixed jaw angle extrusion. The jaw plate is, therefore, a relatively easy piece of damage in the jaw crusher.
Q:Structure of ring hammer crusher
It is suitable for crushing brittle, medium and hard materials with little water content. In building materials, metallurgy, chemical industry and thermal power generation industry, it is mainly used for crushing coal, coal gangue, Sha Yan, shale, limestone, gypsum and other minerals. This series of crusher has the characteristics of smooth running, reliable, long service life, compact structure, less dust, low noise, light weight, convenient maintenance, low power consumption, strong ability to discharge super hard material.Ring hammer crusher PCH ring hammer crusher type specification
Q:Is there a broken stone crusher with a diameter of more than 800mm? The ordinary crusher costs too much. I saw it on the Zhengzhou GM
The crusher equipment according to the requirements of users can adjust the hammer and lining Ying gap, change the particle size, to meet the different needs of different users. The main hammer of the crusher is made of the steel wheel of the train wheel, and the lining plate is similar to the 13 steel plate of the jaw plate. The investment is small and the effect is quick.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range