glass wool blanket glasswool pipe
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 roll
- Supply Capability:
- 100000000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description:
Product Description:
Insulation Glass Wool Pipe
In the field of insulation materials, weare mainly specializing in Glass wool products, including blankets, boards andpipes. The advantage of this material is numerous: noncombustible, nontoxic,and resistant to corrosion. It has low weight, low thermal conductivity, stablechemical property, low moisture rate and good hydrophobicity. These productshave been widely used in heat preservation, thermal insulation and soundabsorption in construction, chemical industry, electronic industry, electricpower, metallurgy, energy industry, and communication. High density panelslaminated with facing can be used for Air-conditioning duct system.
TECHNICAL DATA
Item | Unit | Index |
Density | Kg/m3 | 10-100 |
Average Fiber Diameter | μm | 5-7 |
Water Content | % | ≤1 |
Grade of Combustibility | Non-Combustible Grade A | |
Reshrinking Temp | ℃ | ≥250 |
Thermal Conductibility | w/m.k | 0.038-0.06 |
Hydrophobic | % | ≥98 |
Moisture Rate | % | ≤5 |
Noise Resistant Coefficient (NRC) | 0.75 | |
Slag Inclusion Content | % | ≤0.3 |
GLASS WOOL BLANKET
Introduction
The glass wool blanket is applied for largelaying area. Besides the character of thermal insurance, it also has theperformances of shock absorption and acoustical isolation, especially for middleor low frequency sound. It also can cancel the noise and improve workingenvironment.
The glass wool blanket with aluminum foilsurface has good capability of heat radiation protection.
Technical Data
Item | Unit | Index |
Density | Kg/m3 | 10-32 |
Thickness | mm | 25-150 |
Width | mm | 600-1200 |
Length | mm | 10000-30000 |
Note: Product with special specificationcan be made to order.
Both unfaced and faced felts can beprovided.
Application
This material can be freely cut inconstruction according to the shape required, mainly used in room,noise-canceling system, transportation, refrigerators and household electricappliances for noise canceling.
The blanket with aluminum foil is suitablefor high temperature shops, control room, inner wall of the machine shops, roomseparating and inner liners.
Package
Normal packing: Each roll is wrapped withvacuum plastic bag, and then in PE woven bag.
Special required package like PE BAG and PESHRINKED BAG can be made with additional charge.
GLASS WOOL PIPE
Introduction
As this material has the characters ofwater-proof, anti-corrosion and mildewing-proof, glass wool pipe is good atstopping condensation and freezing of the pipes.
TechnicalData
Item | Unit | Index |
Density | Kg/m3 | 48-96 |
Thickness | mm | 25-90 |
Diameter | mm | 18mm-529mm(3/4 inch to 21 inch) |
Length | mm | 1 000,1 200 |
Note: Product with special specificationcan be made to order.
Both unfaced and faced felts can beprovided.
Application
It is widely used in building, heating powerpipes, air conditioning and refrigerators for thermal insurance, such as hotwater pipes, steam pipes, electric power, petroleum and chemical industries.
Glass wool pipe faced with Alum Foil can beapplied to the surface for preventing moisture and radiation.
Package
Reasonable pieces will be packed withplastic bags or carton box, and then into container.
GLASS WOOL BOARD
Introduction
Glasswool board is a kind of plate productwith fixed strength after hot-setting of the centrifugal glass wool. It hasexcellent thermal insurance performance in the environment of both high and lowtemperature.
TechnicalData
Item | Unit | Index |
Density | Kg/m3 | 24-96 |
Thickness | mm | 20-100 |
Width | mm | 600-1 200 |
Length | mm | 1 200,2 400 |
Note: Product with special specificationcan be made to order.
Both unfaced and faced felts can beprovided.
Application
It is mainly used for the partition wall inthe high-grade building, such as ceiling, air conduit and inner wall forthermal insurance, machine shops for noise absorption, and metal ceiling forcontrol of moisture.
High density panels with laminated facingcan be used for Air-Conditioning Duct System.
Package
Reasonable pieces will be packed withplastic bags, and then into container.
- Q:What is the difference between anti-high temperature glass wool and ordinary glass wool?
- Difference: High-temperature glass wool is made up of glass fibers and special high-temperature adhesive. It is yellowish with curing agent as the high temperature adhesive and with a small quantity of glue. While ordinary glass wool is dark yellow with ordinary resin adhesive as the binder.
- Q:Which kind of soundproof cotton is the best for decorative gypsum board partition ? Mineral rock wool or glass wool?
- The upstairs answer is wrong. rock wool is made of basalt through melting and spining, rather than asbestos. Asbestos and rock wool are two different things. Please check soundproof walls. From the aspect of soundproof effect, it is better to combine rock wool and glass wool, with the former insulating low frequency and the latter insulating high frequency. Unit weight should be above 80k. In terms of construction, they are similar. Rock wool may be more difficult for construction workers but it is cheaper than glass wool.
- Q:Are rubber and plastic thermal insulation material and glass wool in air conditioner energy-saving materials ?
- They almost are.
- Q:The difference between glass wool of 50mm and rock wool.
- Glass wool belongs to one of the glass fiber. machine-made fiber cotton wool molten glass fibrosis cotton material belong to glass fiber. type, bulk density, low thermal conductivity, thermal insualtion, acoustic insualtion, anticorrosion, stable chemical performance. Rockwool is also called mineral wool. Use Guangde Shida rock wool and mineral raw materials to make fluffy short fine fibers. Basalt rock wool, pyroxenite, dolomite, iron ore, bauxite can be used to make matrix fiber by going through high temperature melting process and fibrosis.
- Q:what's the temperature the high temperature glass wool endure?
- 400 degrees
- Q:What is the difference between glass wool and rock wool insulation board insulation board ?
- Glass wool is an artificial inorganic fibers, a kind of glass fiber. glass wool is mainly made of natural ores such as quartz sand, limestone, dolomite , added with some pure alkali, borax and other chemicals and melting it into class and fibrating the molten glass, thermosetting resin-based environmentally friendly adhesive binder, an inorganic fiber. Glass wool is good-shaped, low bulk density and thermal conductivity, thermal insulation, sound-absorbing properties, corrosion resistance, chemical stability and other characteristics; typical of porous sound-absorbing material with good sound absorption properties. Rockwool: English name(rockwool), belongs to the inorganic material, using basalt, dolomite as the main raw materials. By high temperature melting, man made inorganic fiber by the high-speed centrifugal device with a strong fire insulation properties.
- Q:What is the highest temperature that the fireproof glass?cotton can resist?
- It has good thermal insulation which is based on the thermal conductivity (λ=0.043W/m2K) of glass?wool.It also has excellent fireproof?performance and it can resist over 1000 ℃.
- Q:How much is the unit weight of thermal insulation glass?wool?boards at least? How much is the unit weight of sound absorption glass panels?
- Sound-absorbing boards must be more than 80K at least, we use boards of 96K.
- Q:How is the thermal insulation property of glass cotton?
- Rock wool is recommended. rock wool are often used in industries, for its better insulation performance and corrosion resistance.
- Q:What is the uses of aluminum foil glass wool felt?
- Roll glass wool felt is coiled materials for large area coverage. It is not only thermal-insulating, but also can reduce shock and absorb sound,especially the medium and low frequency noise. It can help reduce the noise and improve the working environment. This material can be tailored based on the actual needs, mainly used for architectural indoor, muffler systems, transportation, refrigeration equipment, damping, sound absorption, noise reduction for the household appliances. Glass wool felt overlaid with aluminum foil has strong thermal radiation resistance. It is good lining material for high temperature workshops, control room, inner walls of machine room,compartment and flat top.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
glass wool blanket glasswool pipe
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 roll
- Supply Capability:
- 100000000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords