Gasket EPDM Rubber Ring DN500 Factory Quality

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
500 pc
Supply Capability:
10000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Description of Gasket :
Ginseal Spiral-wound gaskets comprise a mix of metallic and filler ma- terial. Generally, the gasket has a metal (normally carbon rich or stainless steel) wound outwards in a circular spiral (other shapes are possible) with the filler material (generally a flex- ible graphite) wound in the same manner but starting from the opposing side. This results in alternating layers of filler and metal. The filler material in these gaskets acts as the sealing element, with the metal providing structural support. These gaskets have proven to be reliable in most applications, and allow lower clamping forces than solid gaskets, albeit with a higher cost.
This gasket is formed with stainless steel 304/316 and graphite,non asbestos,ptfe or other seal material. It is the best gasket for muffler pipe or flang gasket.
It could be standard style,it just formed stainless steel and graphite or non asbestos etc.
It could be add inner ring or outter ring.The material ring  could be carbon steel or stainless steel.

2.Features of Gasket :
• Wide range of applicable working condition,high temperature and high pressure resistance,applicable to super low temperature and vacuum condition.Chemical resistant gasket is available under various medium,through change of composition of gasket.
• Strong stress compensation,stable and reliable sealing performance even under frequent pressure fluctuation condition.
• Perfect sealing performance.
• Normal requirement of flange surface finishing which contact with gasket.
• Easy installation and low pre-tightening stress of gasket.
• Heat treatment industry for furnace parts, fans, tube hangers, and baskets and trays to hold small parts.
• Chemical process industry to contain hot concentrated acids, ammonia, and sulfur dioxide.
•  Food processing industry.
• Hot acetic and citric etc.
1.A.Wound style gasket consists of four type:basic type,with inner ring,with outer ring,and with inner and outer rings. B.Heat exchanger wound style gasket:basic type and with inner and outer rings.
2. Normally matrial used:
A.Steel tape:08F,0Cr18Ni9(304),0Cr18Ni9Ti,1Cr18Ni9Ti(321),0Cr17Ni12,M02(316),00Cr17Ni14M02(316L).
B.(Cold roll)steel plate for inner and outer ring:Outer ring:mild steel,0Cr13 and 0Cr18Ni9
Inner ring:same as steel t
3.Gasket Images:

Gasket EPDM Rubber Ring DN500 Factory Quality

Gasket EPDM Rubber Ring DN500 Factory Quality

4.Specifications of the Gasket:
1.A good compression ratio and elasticity.
2.With plastic appropriate, after pressing can adapt to the sealing surface and sealing surface uneven fill the gap, to ensure good sealing performance with the temperature and pressure in the system of alternating case.
3.With excellent corrosion resistance, not to be damaged in some extreme medium, does not have the expansion and contraction.
4.Under the condition of high temperature softening, does not creep; under the condition of low temperature hardening, does not shrink.
5.Have sufficient strength, when external load conditions, not be crushed; at high temperature, not blown out.
5.FAQ
Ask 1: Why some supplier give me the price much cheaper than you?
Answer:They wanna attract your attention,while you contact with them,they would raise the price by any reason.
Ask 2:What the MOQ?
Answer:The MOQ should reach 800 kilograms
Ask 3:Should i pay for it If some product need molds?
Answer:I'm afraid you should pay for it,However,We would return it back when we get the first order.
Ask 4:What's the delivery circle times ?
Answer:About 2 weeks and we would give the accurate time when we know the quantity.
Ask 5:What's the FOB port?
Anser:Our port are Shanghai and Ningbo usual.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How to test the abrasion resistance of rubber?
Rubber: the word "rubber" comes from the Indian language "cau-uchu", meaning "weeping tree"". Natural rubber is flowing out from the Hevea latex when tapping after solidification and drying process. The finished product is material with elasticity, insulation, waterproof and air.
Q:Process for producing rubber products
There are many kinds of rubber products, but the production process is basically the same. The basic process of rubber products in general solid rubber - rubber as raw materials including: plastication, mixing, calendering, extrusion, molding, curing 6 basic processes. Of course, raw materials preparation, finishing, inspection, packaging and other basic processes are indispensable. The processing of rubber mainly deals with the contradictory process of plasticity and elasticity. Through a variety of techniques, the elastic rubber plastic rubber has become the addition of various additives made of semi-finished products, and then through the vulcanization has semi-finished plastic and rubber products into high elasticity and good mechanical performance.
Q:Which is better waterproof performance, neoprene or silica gel?
High temperature silicone rubber is mainly used for making all kinds of silicone rubber products, while room temperature silicone rubber is mainly used as adhesives, potting materials or dies. The maximum amount of heat curing type, heat curing type and methyl silicone rubber (MQ), methyl vinyl silicone rubber (VMQ, dosage and product grades at most), methyl vinyl silicone rubber (PVMQ low temperature resistance and radiation resistance), there are other eyes of silicone rubber, fluorine rubber and so on.
Q:How to identify the tire rubber is raw or cooked
All use glue tire manufacturing, rubber is the parent material of rubber products, rarely used directly.
Q:How to maintain and store the rubber material?
When storing, matters needing attention are:(1) should be stored in a ventilated, dry environment, the relative humidity of the air is 50% ~ 80%.(2) should be stored in non corrosive media, and away from the heat source, the temperature is about 5 degrees Celsius conditions(3) packing should be kept as far as possible without box stacking
Q:How do you remove the rubber on your new slippers?
There must be some rubber smell, because the bottom containing rubber and plastic bags are used as fine without air so the rubber flavor will be heavier, and you wear for a period of time will not fall, or to buy after put in place of ventilation blowing for one or two days no taste.
Q:How can rubber products be softened?
Softener most used in rubber processing oil department softener (this kind of softener is actually physical plasticizer). The oil softener is processed products in petroleum refining process, has good softening effect, rich source, low cost features. This kind of softener including aromatic oil, paraffin oil, naphthenic oil, heavy oil, paraffin, Vaseline, asphalt, petroleum resin and so on. Rubber softener (oil) is a refinery in the oil processing products, it is liquid products with different viscosity, the difference is that contain different hydrocarbon components. The rubber softener (oil) according to the composition of the hydrocarbons can be divided into paraffin base oil, naphthenic oil (naphthenic oil) and aromatic oil (aromatic oil).
Q:What about the Poisson's ratio and modulus of elasticity of three yuan ethylene propylene rubber (EPDM)?
Three yuan ethylene propylene is ethylene, propylene and non conjugated diene three copolymer. Diene has a special structure, only one of the two keys to copolymerization, unsaturated double bond, mainly as the chain. Another unsaturated polymer will not become the main chain and will only become side chains. The main polymer chain of three yuan ethylene propylene is completely saturated. This property allows three yuan ethylene propylene to resist heat, light, oxygen, especially ozone. Three yuan propylene is essentially non-polar, resistant to polar solutions and chemicals, low water absorption, and good insulation properties.
Q:Half finished rubber film surface white is going on
Because inside the rubber compounding agent reachsupersaturation, rubber compounding agent near surface precipitates first, then from the inner to the surface migration of precipitation when complexing agent in the rubber to reduce its saturated state, precipitation process ended. Causes the complexing agent to achieve the supersaturation state, causes the rubber spraying frost the main reason to have: the rubber formula design is improper, the craft operation is not proper, the raw material quality fluctuates, the storage condition is poor, the product owes sulfur, the product aging and so on.
Q:Why does rubber burn black smoke?
Natural rubber is the structure of isoprene polymers, itself contains a large number of carbon elements

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range