Double Stage Pellet Production Line Machine
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 50 Sets Per Month set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Detailed Product Description
Omoron tranducer
ISO and CE certification
output-100-500kg/h
PP PE material
two extruder,simens tranducer
A. technical parameters
Model | SJSZ45 | SJSZ65 | SJSZ80 |
Power | 75kw | 90kw | 100kw |
Capacity | 120kg/h | 280kg/h | 350kg/h |
Particle Diameter | 3mm | 3mm | 3mm |
Length of Production Line | 12m | 15m | 15m |
1.Conveyor&Metal detector:Detect metal in the films or bags, protect the blades of cutting compactor and screws,convey the films or bags into compaction warehouse
2.Compaction warehouse:Compaction warehouse integrate with crush, compaction, agglomeration.
3.Long screw extruder:38CrMoAlA with nitriding processing
4.Hydraulic change nets equipment:Using plug board type to change nets and keep machine working.The mould is made by 40Cr nitridation .The pressure sensor prompts to change the nets.
5.Short screw extruder:38CrMoAlA with nitriding processing
6.Pelletizer:Two type----Water-ring Pelletizing Machine or Braces particle cutting machine
7.Dewatering Machine: Applicable to pieces of plastic, granules cleaning, dewatering. High dehydration degree, the dehydration rate above 95%, less consumption, and efficiency, a high degree of automation, greatly reduce the labor intensity. Dehydration clean, can remove the dopant sand in the plastic. Advanced technology,convenient clean,low noise.
8.Fan drying machine:Through the double channels strong wind dryer,force drying and cooling article material reach the fast speed effect of shaping up to .
B.Application
1) Extruder/Double-ranks Recycling & Granulating System is mainly used to recycle and reprocess PE, PP waste plastic.
2) We use force feeding, as the screw can exclude air and steam. After plasticization and extrusion, the particles can have high density, nice surface, high output, stable extrusion. Customers can certainly adopt which feeder they like.
3) It is with noodle cutting type, not water-ring cutting.
4) Production capacity: 100-1000kg/h.
5) These machines are for different customers to choose. And we could also design special granulator line according to the customers' request.
C.Packing
PP film and wooden box
D.Payment
T/T--30%deposit and the rest before delivery
- Q:What kind of material is the plastic bag commonly used in supermarkets now?
- Then there are some composite materials, such as the very delicate packaging (milk powder and the like), usually OPP and nylon composite.
- Q:PVC what is the difference between raw and recycled raw materials?
- Generally recycled material will contain a lot of impurities, so some characteristics of raw materials are weakened, such as poor color, impure yellow easily; ash produced after combustion.
- Q:Plastic pipe gas temperature 150 degrees, plastic pipe surface problems?
- Plastic pipe is usually plastic resin as raw material, adding stabilizers, lubricants, etc., to "plastic" method in the pipe mill by extrusion processing. Because of its light weight, corrosion resistance, beautiful appearance, no bad smell, easy processing, convenient construction and other characteristics, it has been more and more widely used in building engineering. Mainly used for building construction of the water supply system, piping, drainage, exhaust and sewage sanitary pipe, underground drainage pipe system, storm pipe and wire installation supporting the use of threading tubes, and so on.
- Q:What are the raw materials of foam plastics and how do they come out?
- More bisphenol A epoxy resin, epoxy value of 0.51 ~ 0.22mol/100g. When the viscosity is 25 degrees centigrade, it is 20Pa / S; the viscosity is 130 s at 1Pa.
- Q:What is Ms plastic material?
- The utility model has the advantages of good transparency, optical property, low moisture absorption, good weather resistance, easy processing, and residual stress of formed products... Other characteristics. Moreover, the proportion of MS resin is lower than acrylic, and the cost is cheaper.General injection molding and extrusion molding, transparent to acrylic resin (PMMA)
- Q:How is plastic material made out?
- At present, resins are polymers that have not yet been blended with additives. Resin accounts for about 40% to 100% of the total weight of plastics. The basic properties of plastics depend mainly on the nature of the resin, but additives also play an important role.
- Q:Aluminum Alloy door corner with what plastic raw materials do?
- The best use of Ninon or ABS material. The two kinds of materials are both hard and hard to wear. However, these two materials, the higher prices.
- Q:Plastic raw materials, electroplating grade round face, electroplating grade, what is the concept?
- The so-called plastic raw material electroplating grade means that the particle of the plastic material is high in purity and high in polarity, and is easy to be evenly adhered to the metal particles before the plating.
- Q:How are plastic products made? What is the raw material of plastics?
- Plastic products are divided into: injection molding, blow molding, spray molding, blister, and die casting. Plastic material is oil. It must be done at a high temperature. The mold you call is usually steel.
- Q:What is the difference between ABS plastic raw materials and recycled materials? Or how to distinguish between raw materials and recycled materials?
- Recycled materials are usually colored, and natural recycled materials do not exist in theory. The black recycled material is the most, and the recycled material is generally poor in toughness. The other is not much different from the new material.
1. Manufacturer Overview |
|
|---|---|
| Location | Suzhou, Jiangsu, China (Mainland) |
| Year Established | 2004 |
| Annual Output Value | US$50 Million - US$100 Million |
| Main Markets | North America; South America; Eastern Europe; Southeast Asia; Africa; Oceania; Mid East; Eastern Asia |
| Company Certifications | ISO 9001:2000; ce |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | OEM Service Offered |
| Product Price Range | |
Send your message to us
Double Stage Pellet Production Line Machine
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 50 Sets Per Month set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
