Female Coupler-Brass Fitting
2.Brass fitting for aluminum plastic pipes,water-heating pipes and brass pipes;
Features of Female Coupler-Brass Fitting:
2.Applications: Brass fittings for aluminum plastic pipe;
3.Color: Brassiness,electroplating or double color.
Female Coupler (HF3012):
- Q:Will the moving angle of the air conditioner indoor be harmful to the connecting pipe joint?
- It will not affect the joint, but it is possible to take care of the brass pipe and bend it or make it straight.
- Q:What's the meaning of the pipe joint 14-M18*1.5? What's the thickness of the wall?
- I found that even if the same manufacturer of a batch of goods, the cone of these joints on the depth of the hole is often different, resulting in a leak, and this problem is often neglected. The correct approach is to connect the end of the pipe with what kind of joint, and the corresponding connection ends are prefabricated with the same type of joint, so that the leakage problem can be avoided to the maximum extent. The ends of the pipe shall be flush. The pipe should be flush in sawing grinding wheel and other tools, and burr cleaning and blowing with high pressure air before use. When installing, the coaxiality of pipe and joint body should be kept as far as possible. If the pipe deflection is too large, it will cause sealing failure. If the pre loading force is unfavorable, the inner edge of the ambassador card sleeve is just inserted into the outer wall of the pipe, and the clamping sleeve should not be deformed obviously. When the pipeline connection, and then according to the specified tightening force assembly. Phi 6-1 card sleeve tightening force is 64-115n, 16 MMR 259n, Phi Phi 18mm for 450n. If the sleeve is badly deformed at pre assembly, it will lose its sealing effect.
- Q:20ppr pipe joint is not what brand, 20ppr pipes can weld?
- As a result, there may be differences in the coefficient of thermal expansion, which may lead to leakage at the joint.
- Q:Quick plug and card sleeve joint sealing which good?
- 1, small;2, standard type;3, metal type;4, stainless steel type;5, flame retardant;6, compound type;7 drum type joint body combination;
- Q:How many bonding methods are there in the belt joint?
- Under normal circumstances, belt joints have mechanical joints, cold sticky joints, heat vulcanizing joints and other commonly used methods.1. mechanical joints, a refers to the use of belt buckle joint, the joint method is convenient and convenient, more economic, if in the process of using belt is damaged, you want to replace the new belt, the belt buckle joint easy to replace, but joint of low efficiency, easy to damage, has a certain effect on the conveyor belt and the service life of the product.
- Q:What is a reinforced pipe joint?
- It has a certain mechanical strength and good shock absorption. It is suitable for making parts under moderate stress, working parts in weak corrosive environment, such as cover, bearing seat, valve body, hand wheel and so onThe main purpose of strengthening the pipe joint is to connect, install and maintain conveniently.
- Q:Hydraulic pipe quick coupling principle of hydraulic pipe joint
- High degree. Piping systems for oil, gas and general corrosive media 15~26GB3733.1 to 3765-1983 flared pipe joints are sealed using the end expansion of the pipe, without the need for other seals. The utility model has simple structure and is suitable for the connection of thin-wall pipe fittingsA low pressure piping system for oil and gas, allowing pressure to be used in table 41, table 27~41GB5625.1 ~ 5653-1985 insert welded pipe joints will need to the length of the pipe is inserted into the pipe end and the pipe connector until the connector end of the contact, the pipe and the pipe joint are welded together, can save over, but the pipe size is strictly applicable to oil and gas as the medium pipeline system table 43 ~ 49JB3878-1985 cone seal welded pipe joint pipe end is an external cone surface, plus O shape sealing ring, and the connector body cone surface matching, screwed with screw. The working pressure is 16 ~ 31.5MPa, the temperature to 80 DEG C - 25Piping system for oil medium 50~62
- Q:Classification of pipe couplings for hydraulic couplings
- Welded pipe fittings, high pressure hoses.Transition type pipe joint, jacket type pipe joint and three type pipe joint,
- Q:Infusion, infusion tube joints fall off and immediately connected, lost three or four minutes will have an impact?
- There is no air on the upper end of the infusion pipe, the joint is not polluted, and immediately after the falling off, the problem is not too great. The switch on the upper end of the infusion tube is not closed. The liquid medicine can be discharged directly and immediately after falling off, so there is nothing wrong with it.
- Q:Why does the air conditioner outdoor pipe joint freeze and freeze in case of refrigeration?
- Normal: a thin tube (pressure pipe) cool or lukewarm, thick tube (tube) cool or cold dew.
Our productions have introduced the latest technology and advanced production equipment. With sound testing and inspection means and solid technical strength and scientific management, we are capable of producing high quality products and our production processes are in full accordance with ISO9001:2000 international quality management system standard. The characteristics of our product meet the national standards .
1. Manufacturer Overview
||Zhejiang, China (Mainland)
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||91% - 100%
|No.of Employees in Trade Department
||3,000-5,000 square meters
|No. of Production Lines
||OEM Service Offered Buyer Label Offered
|Product Price Range