multi-jet wet type vane wheel cold water meter
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Features:
Accurate measurement , easy reading ,safe and sanitary ,long working life ,etc.
Application:
Measuring the volume of cold portable water passing through the pipeline
Note:
Technical data conform to international Standard ISO4064 Class B
Working condition:
a) Water temperature 0.1℃~40℃
b) Water pressure ≤ 1.0MPa
Maximum permissible error:
a) In the lower zone from qmin inclusive up to but excludingqt is ±5%
b) In the upper zone from qtinclusive up to and including qs is ±2%
MAIN TECHNICAL SPECIFICATIONS
Type | Size (mm) | Class | qs Overload Flow | qp Permanent Flow | qt Transitional Flow | qmin Minimum Flow | Minimum Reading | Maximum Reading |
m3/h | L / h | m3 | ||||||
LXS - 15E | 15 | B | 3 | 1.5 | 120 | 30 | 0.00005 | 99,999 |
LXS - 20E | 20 | B | 5 | 2.5 | 200 | 50 | 0.00005 | 99,999 |
LXS - 25E | 25 | B | 7 | 3.5 | 280 | 70 | 0.00005 | 99,999 |
LXS - 32E | 32 | B | 12 | 6.0 | 480 | 120 | 0.00005 | 99,999 |
LXS - 40E | 40 | B | 20 | 10.0 | 800 | 200 | 0.00005 | 99,999 |
LXS - 50E | 50 | B | 30 | 15.0 | 3000 | 450 | 0.00005 | 99,999 |
DIMENSIONS
Type | Size | Length L | WidthW | Height H | Connecting Thread D (in) |
mm | |||||
LXS - 15E | 15 | 165 | 98 | 107.5 | G 3/4B |
LXS - 20E | 20 | 190/195 | 98 | 109 | G1B |
LXS - 25E | 25 | 225/260 | 103.5 | 115 | G1 1/4B |
LXS - 32E | 32 | 230/260 | 103.5 | 115 | G1 1/2B |
LXS - 40E | 40 | 300 | 125 | 156 | G2B |
LXS - 50E | 50 | 300 | 125 | 156 | G2 1/2B |
280 | 165 | 181 | Flange connect ISO7005-2:1988 φD=125 |
Company Profile
The company takes high quality as the foundation, integrity as the road, talents as the cornerstone, good service as the soul, we will supply high-quality products and good after service.
We mainly manufacture Intelligent water meters, remote reading water meters, mechanical heat meters, ultrasonic heat meters and WOLTEX.
Our products are largely used in Running-water Company, real estate company, thermal companies, large state-owned enterprises, schools and armies.
We have complete production qualification, such as production certificate and all test reports, we have passed ISO9001 Quality Management Certification. We are strictly producing according with national standards, industry standards in the production process.
- Q:Construction engineering water meters, meters after entering the field, whether to test?
- An instrument for measuring water flow. The cumulative flow of water is mostly measured. Generally divided into the volume of water meters and speed water meter two categories. The accuracy of the former is higher than that of the latter, but it requires high water quality and is easily blocked when the water contains impurities. An instrument for recording the amount of water used in running water is mounted on a water pipe, and when the user leaves the water, the pointer or wheel turns on the table to indicate the amount of water passed.
- Q:Has the number of water meters been accumulating? Should the water use of this month be reduced by last month? Will it be cleared?
- Hello.The amount of water used in the water meter has been accumulated, and it won't be cleared
- Q:The water meter in the taxi house is broken. Who will fix it?
- The watch should only be changed by yourself. Because the water charges only to your total water meter.
- Q:How can one way water meter be controlled by one way?
- A one-way control device is installed at the water inlet end of the rotor wet water meter, the inner surface of the device is composed of a water inlet end and the water meter shell with a threaded connection with through hole plug, T valve spool and valve plug in and plug, and set the reset spring valve rod in T valve spool on the form. The spool rod in a movable fit way through the center hole plug in T shape at the top of the valve core is a round table, using the reverse flow of top pressure, so that the cone cone and cone shell inlet end face seal, cut off the water, to achieve one-way control.
- Q:The differences between electromagnetic water meters and ordinary water meters, as well as their respective advantages and disadvantages
- Electromagnetic water meter is designed for the actual requirements of water supply enterprises. It can optimize the water supply and ensure accurate water trade measurement and settlement. It conforms to the GB/T778-2007 new water meter standard. Electromagnetic meter for stainless steel shell design, ensure water use in high pollution corrosive environment, in line with domestic water use environment, full structure, zero pressure loss, no wear; ultra large range, small flow sensitivity and large flow measurement is far superior to the ordinary traditional water meter. The remote monitoring and management software system supporting the use of electromagnetic meter with remote transmission function, can not only realize the data receiving, storage flowmeter can also realize the statistics and analysis of data flow, can facilitate the timely control of the water flow in the region of each measurement point. The disadvantage is that its higher prices, complex structure, power to normal use.
- Q:How to see the number of IC card intelligent water meter
- If your water rate is double rate, after you insert the card, the remaining water charge is displayed on the LCD screen,
- Q:How can I see the water meter stealing water?
- Check the pipe at the front of the water meter, and if there is a bypass pipe installed, the bypass is installed, so you can bypass the water meter through the bypass pipe to avoid the meter measurement
- Q:How does water meter read m3? What does it mean?
- The metering unit for the cubic meter (M3), because the density of water is 1 cubic meters =1 tons, so 1 cubic meters is 1 tons. Cubic meters of water below can not indicate the number of records in this month, indicating meter minus the number that indicates the number of water meter last month, this month practical content.
- Q:After the heat exchanger is installed, no tap water is needed. How can the water meter be turned?
- The heat exchanger is installed, you just use it for you with the heat, hot water is tap water through a heat exchanger to heat exchanger, so the water wheel is normal: besides, hot water can not be directly used to boiler, boiler water to dosing
- Q:Service life specification of water meter
- According to experts, water meter, ammeter before installation must be detected by the Institute of metrology, through the inspection of the table will be labeled as a mandatory testing logo, but a long time many people have ignored the identification, detection of the institutions and regulations of the state, China's water needs to be replaced once every six years the meter, life can be up to ten years, but also need to be tested once three years.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
multi-jet wet type vane wheel cold water meter
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords