Made in China Graphite Electrode for EAF Furnace Stable Quality
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Quality Graphite Electrode For EAF Furnace
Packaging Details:
1: Wooden crates with steel straps; wooden crates treated with "IPPC" label
2: standard export fumigated wooden box with steel strip fixed outside
3: In wooden case, each nipple must be packed in cardboard box.
Each electrode and nipple to preset at one end. The head of the preset nipple shall be covered by cardboard cap supported by wooden plate from both ends to avoid damage to the threads during transportation
Delivery Detail: 15-45 days after confirming the contract
Production Description:
Graphite electrode is made from the domestic first petroleum coke and high quality needle coke and widely used in the electric arc furnaces for production of alloy steels, metal and other nonmetallic materials, etc. The graphite electrodes include regular power, high power, super high power, ultra high power and square electrode. The range of diameters covers from 200mm to 700mm. Our products own the following characteristics: low electric resistance, good electric and thermal conductivity, high oxidation resistance, greater resistance to thermal and mechanical shock, high mechanical strength, high machining accuracy.
Physical and chemical index
Item | Unit | Nominal Diameter(mm) | |||
YB/T4088-2000 Industry Standard | Typical Values | ||||
300-400 | 450-550 | 350-550 | |||
Resistance | Electrode | ohm | ≤6.2 | ≤6.5 | 4.6-6.2 |
Nipple | ≤5.5 | ≤5.5 | 3.5-4.5 | ||
Bending Strength | Electrode | Mpa | ≥10.5 | ≥10.0 | ≥11.0 |
Nipple | ≥16.0 | ≥16.0 | ≥18.0 | ||
Elastic Modulus | Electrode | Gpa | ≤14.0 | ≤14.0 | ≤13.0 |
Nipple | ≤18.0 | ≤18.0 | ≤17.0 | ||
Density | Electrode | g/cm3 | ≥1.65 | ≥1.64 | 1.65-1.72 |
Nipple | ≥1.72 | ≥1.70 | 1.75-1.82 | ||
Ash content | Electrode | % | ≤0.3 | ≤0.3 | ≤0.3 |
Nipple | |||||
CTE(100-600) | Electrode | 10-6/C | ≤1.5 | ≤1.5 | 1.20-1.40 |
Nipple | ≤1.4 | ≤1.4 | 1.10-1.30 | ||
- Q:How large is the permissible overload current per square millimeter of the graphite electrode cross section?
- The safe current is decided according to the conductor wire cooling conditions, cooling conditions, the overhead line package, an insulating layer and bare, cooling conditions are also different.
- Q:What is the composition of petroleum coke and what is its use?
- Petroleum coke can be used for the manufacture of graphite, smelting and chemical industries, depending on its quality. For example, the quality of cooked sweet coke coke, mainly used in the manufacture of ultra high power graphite electrode and some special carbon products; needle coke in steelmaking industry is an important material new technology development of EAF steelmaking.
- Q:How should carbon deposits be treated?
- In this way, can keep the engine seal, to prevent oil because the gap is too large and rampant, buried carbon curse generation "".
- Q:Graphite electrode specifications, graphite electrode manufacturers which good?
- Graphite electrode has good electrical and chemical stability. It has high mechanical strength, low impurity content and good vibration resistance at high temperature. It is a good conductor of heat and electricity. Qingdao Chenyang graphite graphite electrode quality is good, they are a direct manufacturer of graphite electrode. Hope to be of some help to you.
- Q:Synthesis techniques of carbon nanotubes
- Laser evaporation is an effective method for the preparation of single-walled carbon nanotubes. Single walled carbon nanotubes and single-walled carbon nanotube bundles were prepared by evaporation of carbon targets doped with Fe, Co, Ni or their alloy by high energy CO2 laser or Nd/YAG laser. The diameter of the tubes can be controlled by laser pulses. The researchers found that the shorter the laser pulse interval, the higher the yield of SWNTs, while the SWNT structure was not affected by the pulse interval time. Using CO2 laser evaporation method for single wall carbon nanotubes at room temperature, if the use of fast imaging technology and emission spectra can be observed in morphology of smoke and carbon containing debris flow evaporation in argon, the diagnostic technology makes the growth process of single wall carbon nanotubes tracking possible. The main disadvantage of laser evaporation (ablation) is that the purity of single walled carbon nanotubes is low and easy to entangle.
- Q:Graphite electrode press device
- Ultra high power graphite electrodes. Use of graphite electrodes with a current density greater than 25A / cm 2. Used primarily in ultra high power arc furnaces
- Q:How about graphite electrode high-temperature oxidation resistant coating?
- Heat resistant coating is generally able to withstand 300 degrees below the temperature, commonly used aluminum heat-resistant paint, high temperature resistance can withstand higher temperatures, such as 800 degrees or more, commonly used silicone heat-resistant paint
- Q:How can I electroplate iron? I would like to use graphite as an electrode. Iron is plated on graphite with iron solution, so it can be processed into iron parts. I wonder if it can be done
- Iron plating can be, with 2 valence iron, but on the graphite joint force is good, it is difficult to say, electroplating is bad, peeling is also common. Relatively speaking, iron parts on nickel plating is relatively simple, also more applicable
- Q:The graphite electrode made by the machining center adopts cooling method, which is water cooled, oil cooled and blow cold. Which is good?
- Use oil cold. Air cooling will cause graphite dust flying, on the one hand, toxic, on the one hand there are security risks (caused by circuit short circuit). Water cooling is virtually out of use, taking into account the maintenance and maintenance of the CNC.
- Q:What is the graphite furnace electrode with a diameter of 400?
- The variety and specifications of graphite electrodes used in modern EAF steelmaking are mainly determined by the technical parameters of the steelmaking furnace.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Made in China Graphite Electrode for EAF Furnace Stable Quality
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
