90W Poly Solar Panel with High Efficiency Made in China
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 watt
- Supply Capability:
- 1000000 watt/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Product Description
Product Description
Solar module/panel with high efficiency solar cells
Strong, lightweight aluminum frame design with reinforced sealing and load hold to prevent freezing and warping, and stand against high wind.
Under Standard Test Conditions(STC): Irradiance of 1000W/m2, Am1.5 and 25º C cell temperature.
Mechanical Characteristics
Dimensions: 670mm(L) x 846mm(W) x 30mm(H)
Weight: 9.0kg
Solar Cells: Polycrystalline solar cells, 36 cells
Construction: Front: High-transmission 3.2mm tempered glass; Encapsulate: EVA; Back: TPT
Frame: Clear anodized aluminum alloy Color: Silver
Product features:
1. The modules use high-quality imported polycrystalline or monocrystalline solar cells;
Enclosed by high-rigidity tempered glass, with excellent light transmittance and output performance;
2. Surface treated with reflection-reducing process, increasing the light absorption.
Back sealed with anti-aging EVA, resistant from moisture and corrosion.
3. The efficiency of our monocrystalline solar cell is over 17%, and polycrystalline panel is over 16%. We stipulate, the allowance of each panel's rated power has to be positive. Each panel is strictly tested before leaving the factory.4. Our solar panel is designed with a lifetime of 25 years, and guaranteed that the power decline less than 10% within 10 years, and 20% within 20 years.
Performance | |
Rated Power[Pmax] | 90W |
Power Tolerance | ± 3% |
Nominal Voltage | 18.28V |
Design Life | 25 years |
Electrical Characteristics | |
Maximum Power [Pmax] | 90W± 3% |
Maximum Power Voltage [Vmp] | 18V± 3% |
Maximum Power Current [Imp] | 5.0A± 3% |
Short-Circuit Current [Isc] | 5.71A± 3% |
Open-Circuit Voltage [Voc] | 21.6V± 3% |
Current Temperature Coefficient | 0.08%/º C |
Voltage Temperature Coefficient | - 0.32%/º C |
Power Temperature Coefficient | -0.38%/º C |
- Q:i was told that by making a solar panel they cause more pollution than they will end up getting rid of. Is that true?
- Absolutely not. This is a myth. The energy payback of a solar panel far outweighs its cost. With current technology (which is vastly improving every year), the payback begins in about -4 years depending on climate. This means that after -4 years, the solar panel has generated the same amount of energy that was used in its entire creation up until the point that it was installed. The panel will then continue to generate power for another 20-25 years at 90-98% capacity if properly maintained. The U.S. Department of Energy has conducted extensive studies on the subject and the results (which i'm quoting) can be viewed on their PV Faq page...
- Q:I have a solar panel I bought for a diy project and it has a small plug on the end of it, but I need to remove this plug to expose the positive and return wires so I can solder a bunch of stuff together. How do I cut off the plug without shorting out the solar panel when I make the cut? Can I just leave it in the dark a while before cutting? I don't think I can remove the wires from the solar panel end before cutting.
- Just cover the panel and cut the wire the voltage will be so low it would be like shorting out a battery
- Q:I am doing a report about solar power and I need to know what determines the amount of electricity produced?example: exposure to sun, angle of panel, qualityplease tell me as much as you canmuch appreciated
- It depends on what you mean by amount of electricity. Normally that would mean the total energy produced over a given period. In that case, the main factors are ) Efficiency of the solar cells 2) Total irradiation received: incident radiation density times the solar panel area, and the angle of the incident radiation. Item ) is determined by the materials and method of construction of the solar cells Item 2) depends on the location of the panel, both on earth's surface (latitude), time of year, and how the panel is oriented with respect to the horizontal. Altitude of the location can also be a factor. Prevailing weather conditions, number of cloudy days, etc. are important. Independent of these parameters, larger area means more electricity.
- Q:Solar panels single crystal and double crystal in the rain which is easy to use
- From the cost of production, than the monocrystalline silicon solar cells to be cheaper, easy to manufacture materials, saving power consumption, the total cost of production is low, so get a lot of development. In addition, the polysilicon solar cell life than monocrystalline silicon solar cells shorter. From the performance and price ratio, monocrystalline silicon solar cells also slightly better.
- Q:What is the impact of roof pitch on solar panels' efficiency?
- The impact of roof pitch on solar panels' efficiency is significant. A steeper roof pitch allows for better solar panel orientation towards the sun, maximizing the amount of sunlight they can capture. This leads to increased energy production and higher overall efficiency. However, a flatter roof pitch can still be suitable for solar panels, as long as they are properly tilted or mounted to optimize sun exposure. Ultimately, the ideal roof pitch for solar panels depends on factors such as geographic location, climate, and the specific solar panel technology being used.
- Q:Can solar panels be installed on a south-facing wall?
- Yes, solar panels can be installed on a south-facing wall. In fact, a south-facing wall is usually the most ideal location for solar panel installation as it receives the maximum amount of sunlight throughout the day, maximizing energy production.
- Q:Can solar panels be used in areas with high levels of seismic vibrations?
- Yes, solar panels can be used in areas with high levels of seismic vibrations. However, it is important to ensure that the solar panel installation is structurally sound and designed to withstand the vibrations caused by seismic activities. Additional measures such as reinforced mounting systems or flexible support structures may be needed to enhance the resilience of the solar panels in such areas.
- Q:Can solar panels be used in areas with high levels of wind-blown debris?
- Yes, solar panels can be used in areas with high levels of wind-blown debris. However, it is important to install the panels in a way that minimizes the impact of the debris. This can be achieved by using protective measures such as installing wind deflectors or choosing panels with stronger frames and tempered glass. Regular maintenance and cleaning may also be required to ensure optimal performance in such conditions.
- Q:I want to be more self sufficient and get solar panels for electricity in a small house any tips will help. i need to know how many watts is enough and ect.
- To clarify your thinking, ask yourself whether your goal is really to be more self-sufficient, or to save money. For most people, I think when they say they want self-sufficiency, they really mean they want to save money, not pay more. The money-saving route may come through putting in more insulation on the house, or double-pane windows, or energy-efficient appliances. Solar might play a part, but the kind of solar that pays back well (if at all) is the type without batteries. That doesn't give you self-sufficiency - if the power company has a blackout, the solar electric will automatically disconnect. Your power company may offer a free energy audit to help you save money. And if you are interested in pursuing solar electric (or even better, solar hot water), check with a local installer. They can size your system and give you a free quote.
- Q:Can solar panels be installed on a shaded area?
- Solar panels can be installed in shaded areas, but they won't be as efficient as panels installed in direct sunlight. The amount of shade and the duration of shading throughout the day will impact the overall performance of the solar panels. It is recommended to install solar panels in areas with maximum sunlight exposure for optimal energy production.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
90W Poly Solar Panel with High Efficiency Made in China
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 watt
- Supply Capability:
- 1000000 watt/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords