Wire Braided Hydraulic Hose High Pressure DN32
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 80000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Wire Braided Hydraulic Hose
Construction: this hose shall consist of an inner tube of oil resistant synthetic rubber, a single steel wire braid reinforcement, and an oil and weather resistant synthetic rubber cover.
Applications: this section covers hose for use with petroleum
Temperature range: -40℃ to 100℃
1.Simple and compact construction. Small in size and light in weight. Easy transportation, installation and maintenance.
2. Quick 90 degrees on-off operation. Minimized operating torque ,energy saving.
3. Excellent sealing performance with no leakage. Long service life.
4. Wide selection of materials ,applicable for various media..
5. Flow curve tending to straight line. Excellent regulation performance.
Tube | High oil/ fuel/ gasoline/petrol /hydraulic fluid resistance performance synthetic rubber |
Reinforcement | One or two high tensile synthetic yarn braids reinforcement or steel wire reinforcement |
Cover | Weather protective, heat and oil resistant synthetic rubber. (corrugated finishing) |
Temperature | -30C to 120C |
Size | 3/16''~5'' |
Roll | 50~100meter |
Color | Black, Red, Green, Blue, Yellow, Grey |
Surface | Cloth surface or smooth surface |
Application | Variety of application for delivery of gasoline,kerosene,diesel oil,lubricating and other mineral oil. |
Sample | Free |
MOQ | 100 meter |
Business type | Manufacture |
Certification | UL330, ISO9001:2008 |
Package | Packaged by plastic woven bag or carton |
Main hose hydraulic products
1. Hose hydraulic (R1,R2,R3,R4,R5,R6,R7,R8,R9,R12,R13,R14,R17)
2. High pressure hose hydraulic (4SH,4SP,6SP)
3. Low Pressure Hose ( air hose, water hose, oxygen hose, LPG hose, twin hose)
4. Steam Hose
5. Teflon hose, stainless metal hose
6. Hose assembly
7. Hose fitting
- Q: Does the rubber tube affect the engine in the car's tank?
- I don't know what you mean by that, but the car's tank itself needs to be sealed and no clutter is allowed
- Q: Why does Br2 corrode rubber tubes?
- Bromine elements need to be sealed with water to prevent steam escaping and harm the human body. Oxidizing, there are a variety of variable valency, under normal temperature and weak water reaction, generating hydrobromic acid and bromate. Heating increases the speed of reaction. Hydrobromide is a strong acid with an acid stronger than that of hydrogen chloride. Bromine is commonly used in organic synthesis.
- Q: Can the natural gas hose not exceed 1.5 meters or 2 meters?
- If the gas is longer, to Caution! Protective tube wall, as far as possible, to prevent accidental damage risk of gas pipe.
- Q: The function of rubber joint?
- The seamless seamless rubber joint produced by the rubber joint prevents the corrosive medium from eroding the inner wall of the rubber joint and improves the service life in the high temperature resistant, acid resistant and oil resistant pipes
- Q: How to detect the reliability of rubber hose
- Suction flat test: in the 1min vacuum, after maintaining 10min, with diameter of 0.9 times the diameter of the hose rolled over, check the degree of collapse of the hose. Some standards used to measure the rate of change in the outer diameter of the hose to indicate the extent of deformation of the hose.
- Q: Water heater hose 4 points and 6 points difference
- 1 inches =25.4mm, 4 points hose is DN15 pipe, that is, the inner diameter is 15 millimeters, 6 points hose is the diameter of 20 mm tube, 5 to 4 hose, you should say that the variable hose hose is divided into: stainless steel. Divide 1 inches into 8 parts, eight in 49, four in charge, and 6/8 in six.
- Q: How to determine the tensile strength of GB rubber joint?
- The tensile strength of adhesive joints that can resist the ultimate capacity rubber tensile failure, tensile test piece refers to fracture when the unit section of the load, also known as tensile strength, tensile strength, unit MPa (MPa). Tensile strength is generally used as the main physical and mechanical standard in rubber joint industry.
- Q: HDPE double wall corrugated pipe joint shall be made of elastic sealing rubber ring and socket joint interface. What are the requirements for rubber ring joint?
- The interface method should be carried out according to the following procedures: DN400 pipeline and below, by a man with a cotton rope hook is installed pipe socket, the other one with a long lever oblique insertion based cross baffle against the tube end of the center position, and then forced the tube slowly into after the installation of HDPE double wall corrugated pipe the pipe socket to a predetermined position; more than two sets of DN400 pipeline by hand hoist will pull in pipe section. When the interface is closed, the spanner on both sides of the pipe section shall be pulled synchronously, so that the rubber sealing ring is properly positioned and is not distorted or not falling off.
- Q: Do the rubber joint and Y filter need flange connection?
- Rubber hose joints are usually externally threaded, and type Y filters are internally threaded and are directly connected to the same caliber.Flange connection also has ah, according to demand
- Q: Laboratory condensate water pipe must use rubber tube, shall not use latex tube reasons
- Hose size measurement: the inner and outer diameter, outer diameter, wall thickness, enhancement layer concentricity, inner and outer layer of glue thickness, assembly diameter, new GB and ISO increased the length and the measuring point mark, provides no pipe joint and a hose length of various pipe joint measurement method.
Send your message to us
Wire Braided Hydraulic Hose High Pressure DN32
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 80000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
