Wire Braided Hydraulic Hose
Construction: this hose shall consist of an inner tube of oil resistant synthetic rubber, a single steel wire braid reinforcement, and an oil and weather resistant synthetic rubber cover.
Applications: this section covers hose for use with petroleum
Temperature range: -40℃ to 100℃
1.Simple and compact construction. Small in size and light in weight. Easy transportation, installation and maintenance.
2. Quick 90 degrees on-off operation. Minimized operating torque ,energy saving.
3. Excellent sealing performance with no leakage. Long service life.
4. Wide selection of materials ,applicable for various media..
5. Flow curve tending to straight line. Excellent regulation performance.
Minimum bend radius
High oil/ fuel/ gasoline/petrol /hydraulic fluid resistance performance synthetic rubber
One or two high tensile synthetic yarn braids reinforcement or steel wire reinforcement
Weather protective, heat and oil resistant synthetic rubber. (corrugated finishing)
-30C to 120C
Black, Red, Green, Blue, Yellow, Grey
Cloth surface or smooth surface
Variety of application for delivery of gasoline,kerosene,diesel oil,lubricating and other mineral oil.
Packaged by plastic woven bag or carton
- Q:How can the soft joint of the pipe be elongated during use?
- Solution: the pipeline on the pipeline joint soft products need to increase to prevent stretch device (anti rato limiter), can limit the pipeline effectively soft joint work in the normal length, effectively ensure the service life and the effect of the product. Recommended products: KXT type reinforced pipe soft joint.
- Q:The rubber is sheathed on the metal cylinder. How can it be connected?
- If you describe it, it is recommended that a soft binder such as 704 silicone gel will be used to prevent shock absorption and separation. Metal surface to rust treatment, clean can be coated adhesive, rubber cover surface is best polished, degreasing treatment effect is good!
- Q:How to replace natural gas hose? Steps?
- Rubber products are rotten, especially the kitchen fume gas hose to erosion, and temperature will cause the hose and hose aging, but also bear the pressure of gas altar, for safety, or in accordance with the gas company's proposal to replace a 2 year.
- Q:How to identify the quality of rubber pipes for sewage treatment?
- A tubular rubber product used to transport gases, liquids, slurries, or granular material. It is composed of inner and outer rubber layer and skeleton layer. The material of skeleton layer can be made of cotton fiber, various synthetic fiber, carbon fiber or asbestos, steel wire and so on.
- Q:Method for inserting glass tube into rubber tube when assembling instrument
- In the pipeline connection, the rubber tube and the plastic pipe are commonly used for the glass tube sleeve connection. Because the caliber of the glass tube is different, the sleeve connection method is different.The connection of the glass with the outer diameter can be connected by a rubber tube, and the inner diameter of the rubber tube shall be slightly smaller than the outer diameter of the glass tube, and the glass tube can be lubricated with water or soap (not oily lubricant) when connected.
- Q:Can high speed air flow through a rubber tube and produce static electricity?
- To solve this problem, I suggest you do not focus on the voltage level, but focus on how to eliminate static electricity. For example, choose a low resistivity rubber material to ground and control the airflow humidity (if possible).If you really need to accurately grasp the size of the voltage caused by static electricity, and there is no reference to the literature, you may as well begin to study the experiment.
- Q:What are the production processes and characteristics of high pressure rubber hose?
- Production flow chart of high pressure steel wire braided hose:High voltage wire winding production process: rubber hose, pipe extrusion, boiled casing (core wipe silicone oil), wrapped around the screen (screen on the casing after finishing cutting winding), a layer of glue, the first layer of steel wire winding, two winding layer of glue, second layers of wire, third in the layer of glue, third layers of wire winding layer, fourth layer, fourth layer winding wire, package cover, water roll of cloth, cloth, water solution of vulcanization, mandrel stripping, a hydraulic, appearance and dimension inspection and packaging storage.
- Q:How do the automobile rubber hoses combine with the quick couplings?
- Turn the rotary handle on the quick connector to the open position first;
- Q:What's the cause of a default like a general rubber product?
- Rubber aging is a common problem of rubber products, and aging is mainly due to internal structure or component is easy to aging due to weakness, such as unsaturated double bond, branched, carbonyl, hydroxyl and so on; at the end, the main external or environmental factors are sunlight, oxygen, ozone, heat, water and mechanical stress force, high energy radiation, electricity, industrial gas, water, salt fog, fungi, bacteria, insects etc..
- Q:Can the high-pressure rubber hose be followed by water pipes? Will it be poisonous?
- No, because I did not meet the drinking water level requirement!! Hose with drinking water hose!! Drinking for a long time is poisonous!
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range