Wheel loader - Backhoe Loader WZ30 -25
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
| Overall Dimension | |
Length X Width X Height | 5900X 2200 X 3769(mm) |
Cab roof height | 2900(mm) |
Wheel base | 2250(mm) |
Track | 1640(mm) |
Min. ground clearance | 300(mm) |
| Main Technical Specification | |
1 system pressure | |
load hydraulic system | 18Mpa |
dig hydraulic system | 20Mpa |
steering hydraulic system | 12Mpa |
2 system flow | 120L /min |
3 four-wheel drive, whole hydraulic system |
|
4 total operating weight | 7600kg |
5 maximum speed | 22Km/h |
6 maximum gradient capacity | 30 ° |
1 loading bucket capacity | 1m3 |
2 rated loading | 2500KG |
3 maximum articulated height of bucket | 3400(mm) |
4 bucket discharge height | 2795(mm) |
5 bucket discharge distance | 1048(mm) |
6 loading lift capacity | 25KN |
7 bucket hydraulic translation function | yes |
8 bucket lift time | 6.8s |
9 bucket lower time | 2.5s |
10 bucket discharge time | 1.2s |
11 maximum tractive force | 39KN |
12 maximum breakout force | 38KN |
1 back acter bucket capacity | 0.3m3 |
2 backacter discharge height | 3878(mm) |
3 maximum digging depth | 4080(mm) |
4 maximum digging radius | 5688(mm) |
5 bucket slewing angle | 190 ° |
6 bucket digging capacity | 46KN |
7 bucket stick digging capacity | 31KN |
| Diesel Engine | |
1 model | Dongfeng Cummins 4BTA3.9-C100 LUOTUO YTR 4108G 60-1 |
2 type | turbocharging four-stroke |
3 rated power | 74KW/100HP 55KW/74HP |
4 rated speed | 2200 r/min 24002200 r/min |
5 cylinder –internal diameter | 4—110 4-108 |
6 maximum torque | 310NM 261.7N.M/1800R/MIN |
7 minimum fuel consumption | 245g /kw.h 216 g /kw.h |
8 displacement | 4.5L 4.4L |
| Transmission System | |
1 model of hydraulic pump | fixed shaft power shift transmission |
2 gear shift | 2forward shift 2 reverse shift |
3 torque | YJ-280 |
4 drive pump | CDXaf3016-IL |
5 flow | 16ml/r |
6 work pump | CBGj2063 |
7 flow | 63ml/r |
| Steering System | |
1 type | articulated hydraulic steering |
2 model of steering control valve | BZZ5-250 |
3 model of turning control valve | YSF25S-00 |
4 steering angle | left or right 36 ± 1 ° |
5 minimum turning radius | 5018(mm) |
| Axles | |
1 main transmission type | single reduction |
2 wheel reduction type | wheel reduction |
| Wheel | |
1 tire size | 16/70-20 |
2 front wheel pressure | 0.22Mpa |
3 rear wheel pressure | 0.20Mpa |
4 service braking | air over hydraulic disc on 4 wheels |
5 parking brake | manual parking brake |
| Refill Capacity | |
1 fuel tank | 70L |
2 transmission | 25L |
3 front axle | 9KG |
4 rear axle | 9KG |
5 hydraulic tank | 140L |
A loader is a type of tractor, usually wheeled, sometimes on tracks, that has a front-mounted square wide bucket connected to the end of two booms (arms) to scoop up loose material from the ground, such as dirt, sand or gravel, and move it from one place to another without pushing the material across the ground. A loader is commonly used to move a stockpiled material from ground level and deposit it into an awaiting dump truck or into an open trench excavation.
The loader assembly may be a removable attachment or permanently mounted. Often the bucket can be replaced with other devices or tools—for example, many can mount forks to lift heavy pallets or shipping containers, and a hydraulically opening "clamshell" bucket allows a loader to act as a light dozer or scraper. The bucket can also be augmented with devices like a bale grappler for handling large bales of hay or straw.
In construction areas loaders are also used to transport building materials - such as bricks, pipe, metal bars, and digging tools - over short distances.
Front loaders are commonly used to remove snow especially from sidewalks, parking lots, and other areas too small for using snowplows and other heavy equipment. They are sometimes used as snowplows with a snowplow attachment but commonly have a bucket or snowbasket, which can also be used to load snow into the rear compartment of a snowplow or dump truck.
High-tip buckets are suitable for light materials such as chip, peat and light gravel and when the bucket is emptied from a height.
- Q: I have a 460 Farmall, and recently mounted a front-end loader on it. I was told that I could use the 2 single spool hydraulic valves I already have, and not have to purchase a new costly 2 spool valve, for my up and down pressure. I was told to simply install a nipple fitting between the two valves. Anyone out there know about this?
- If these valves are org. equipment from the tractor; one control for up and down of the loader. the other for the bucket.
- Q: Should I get the Halo B, Empire Reloader B, or the Invert Halo Too? Money isnt an issue.
- never used the invert myself, but i would go with the halo b. it has a good speed and will easily keep up with most guns as long as your not going totally insane with the bps. you can buy upgrades for the board to make it faster and there are a ton of replacement parts available. they are very good for the price. the only hopper i liked over the haloB is the viewloader vlocity. i think it is a bit better than the halo as far as speed right out the box. it is quite tall though once you have it on the gun (the only setback) best of luck
- Q: my laundry smells musty when i take it out of the front loader machine i have, how do i get rid of that smell?
- I would use Clorox bleach, just use the regular bleach, use about two cups of bleach, put the bleach in the wash not the rinse cycle, use full load option so the bleach can clean the washer. If this doesn't help, ask someone at Sears if they know of any way to get the musty smell out of it. Good luck, and let me know if I helped you at all.
- Q: I was wondering if it was wise to lube the empire prophecy v2 loader?I haven't used it in some time being too busy to play, although it may be a battery issue, it just seems it doesn't work as smoothly as it did before. and i've only used it a couple times. it's practically brand newany advice?Thanks!
- I would suggest the pinokio loader. It has detailed reviews explaining its durability in woodsball and speedball, It is priced competitively, and its feed rates are up there with empire. If your interested in going with empire, the magna drive loader is truly the top of the heap. It has incredibly fast feed rates that can be synchronized with your guns eyes, or it can hear your bolt cycle. It is only $129.99. Furthermore the magnets in the drive allow you to adjust the tension in the feed system. It is truly a great loader.
- Q: Ladies in the bra earth moving equipment category, are you a front loader or a back hoe?
- oOoOo meet me in the back hoe and I'll show you a front loader.
- Q: Help my USB loader gx channel for wii wont load games but it works in the homebrew channel?
- if it works in hbc, use it there. delete the usbloadergx channel and install a fowarder. it's about the same thing as a shortcut on the computer more or less. it's a channel but it opens the loader that is in hbc.
- Q: all of a sudden it all disappeared.one day all of the forums are all about this brazilian who put up a video then its all gone like nothing ever happend.even my subscribed threads are gone and nobody seemes to care.
- The author removed his youtube link and admitted it was a fake, rather than admit they had been duped many sites removed all references so they can keep the myth alive that the PS3 will be hacked. Short of a huge blunder by Sony (like releasing the boot encryption key) we wont see a custom firmware, or boot loader.
- Q: Have a Cammenga easy loader and it will not load over one round. Do you have to used a stripper clip with this loader to make the rounds feed into the magazine? 7.62x39 AK Has some one has had the same problem out there.
- i just load mine one by one-im in no hurry-i always have at least two mags loaded-no need for speed when your prepared lol ;)
- Q: Liugong, what's the oil in the gearbox of the 50 loader?
- Look at what area, plus 6, plus 8, in the South plus 6, more in the North plus 8
- Q: I have already installed linux redhat on /dev/hda6 with GRUB boot loader on MBR then I have installed windows xp on /dev/hda1 now I lost GRUB boot loader of linux. I do not want to re-install linux. How it possible to locate linux from boot.ini?
- I assume you're using the ext3 file system for your RedHat installation. I don't think ntloader can detect ext3 partitions, so you'll have to reinstall Linux, or grab a new boot loader like GAG
Send your message to us
Wheel loader - Backhoe Loader WZ30 -25
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
