Q:The difference between cut-off valve and gate valve

The working principle is different. The stop valve is an upward stem type, and the handwheel rotates and rises with the stem. Valve is hand wheel rotation, stem upward movement. Flow is not the same, the gate valve requires full open, the cut-off valve is not the same. The gate valve has no inlet and outlet direction requirements, and the cut-off valve has the required inlet and outlet!Gate valve and stop valve are shut-off valve, is the most common two valves.From the exterior, the gate valve is shorter than the cut-off valve, especially the bar valve needs a higher height space. Valve sealing surface has a certain degree of self sealing capacity, its spool depends on the media pressure tight contact with the valve seat sealing surface, to achieve tight leakage. Wedge gate valve spool angle is generally 3~6 degrees, when forced to shut down excessive or temperature changes of the valve core is easy to die. Therefore, high temperature and high pressure wedge gate valve, in the structure have taken certain measures to prevent spool stuck. The valve in the opening and closing valve and valve seat sealing surface contact and mutual friction is always so easy to wear sealing surface, especially in close off the valve, the valve before and after the great pressure, sealing surface wear is more serious.

Q:What's the difference between open rod gate and dark rod gate valve?

3, dark rod valve is located inside of the body, in the process of opening and closing, stem only rotation move, the gate in the valve body lifting; the valve stem rod driven gate valve with the valve stem of the lifting drive thread in the external body, according to the direction of movement of the stem and the position of judge the gate opening and closing and position;

Q:What does the gate valve 150# mean? Is it stress PN? What's that, PN16 or?It's better to have some specific links, thanks!

I think PSI is equal to 150#The sign behind is "PSI"You Baidu "ANSI standard pressure, pound scale and nominal pressure relations table" will knowI'm new, too, I understand

Q:What gate DH10016, AM

The first Z represents the gate valve (the initial consonant of the Chinese phonetic alphabet for the gate); the second 2 represents the drive mode of the valve, that is, electro hydraulic drive.

Q:What's the difference between a soft seal gate valve and a hard sealed gate valve?

It uses the elastic material of the gate, and uses the elastic material to produce the micro deformation compensation effect. It can achieve good sealing effect. Soft sealing gate valve has the advantages of light switch, reliable sealing, good elasticity memory and long service life.Hard sealing surface of the gate valve for cast iron or stainless steel, open and close resistance is small, no flow, but poor sealing performance.

Q:Soft sealed gate valve and hard sealing gate valve which good?

If the caliber, material and pressure levels are the same, the current market price is still soft sealed gate valve, about 20-30%.

Q:What are the types and product categories of knife gate valves?

Knife gate valve drive mode:Manual, sprocket, electric, pneumatic, hydraulic, bevel gear, electronically controlled, hydraulic and pneumatic drive. Knife gate shape: bright rod, dark rod two kinds. Knife gate valve material: cast iron, cast steel, carbon steel, stainless steel, fluorine and so on. Knife gate valve seal: hard sealing, soft sealing, single-sided sealing, double sided sealing and other material seal.

Q:Function of signal butterfly valve and gate valve

The signal butterfly valve applies to petroleum, chemical, food, medicine, papermaking, water and electricity, ships, water supply and drainage, smelting, energy and other system pipelines. It can be used as regulating and throttling devices in a variety of corrosive, non corrosive gases, liquids, semi fluids, and solid powder pipelines and containers. It is widely used in high buildings, fire protection systems and other piping systems that need to display valve switching status.

Q:What does gate valve Z41H-40 mean?

Z - that means gate valve (the initial letter of Zha)4---- is the connection form, which means flange connection1---- form of structure, which means Plain Bar wedge type rigid single gate valveH---- sealing surface overlaying ferrous carbide (initial letter of alloy steel He)40---- nominal pressure is 40 kg, or 4.0MPa, that is, PN10 at 250 degrees Celsius, the maximum working pressure is 40 kgThe material is cast carbon steel

Q:Notes on flat gate valves

Use, maintenance, maintenance and precautions1. valve before leaving the factory have made strength and sealing test, the use of all connections should maintain the initial state.2. this series of valve operating handwheel is marked with open and close rotary direction, and the upper part of rod is equipped with open and close height gauge for regulating indication.3. when the valve and pipeline welding, the valve should be opened, appropriate to protect the neck with moisture, minimize heat conduction, to prevent damage to the sealing packing parts.4. when the valve is closed, the lever shall not be used. When the gate is closed to the top, the handwheel shall be turned 1/2 so that the gate is in a floating state.5. in the use of the valve should be regularly to the valve cap injection grease joint into the quantitative grease.6., the valve in use, such as vulnerable parts and leakage, should be replaced in time.7., the valve in the overhaul process, the cavity should be cleaned, the assembly should be added to the transmission parts of grease.8. valve storage during the shutdown, the gate should be in the closed position, long-term storage should be placed in ventilated dry place, regular inspection and maintenance.