Q:What is the wedge type gate valve wedge is what mean

B. wedge type single gate, it is the whole wedge gate. In the process of opening and closing the sealing surface is prone to scratches, easy to make the temperature change gate wedge live. It is a gate used for normal temperature, medium temperature and various pressures. C. wedge double plate, which is composed of two gates composed of spherical top hinged into wedge-shaped gate. The advantage is that the accuracy of the cover angle is lower; the sealing surface of the gate can be compensated by adding shim at the top of the seal; the temperature changes are not easy to cause the phenomenon of the card master, nor should it be abraded. Because the gate is movably connected and has more parts, it is easy to bond in the viscous medium and affects the sealing. Especially when the upper and lower baffles are corroded all the year round, the flashboard falls off arbitrarily. It is usually used for water, steam and gas pipelines.

Q:What is plug welding gate valve?

Plug connection pipeline welding mode safety gate valve

Q:Internal screw current limiting gate valve (Tan Gang) PN5.0 DN15/ Phi 1 Rc1/2 what does that mean?

We did thatInternal thread current limiting gate valve (Tan Gang)Body material: carbon steelPressure rating: PN5.0 = 300LB American StandardNominal = DN15 = 1/2"Phi 1 = in the middle of the gate drilling a Phi 1 hole, so that in closing there will be a certain flow, that is, the minimum flow, that is, the current limit.Rc1/2 is thread, which is the connection

Q:what are their applicable conditions? Advantages and disadvantages?

Butterfly valve is a disc type of open and close parts reciprocating reciprocating about 90 degrees to open, close and adjust the fluid channel of a valve.Advantages: the butterfly valve has the advantages of simple structure, small volume, light weight, material consumption, installation of small size, and torque is small, simple and rapid operation, and also has good flow characteristics of regulation and sealed off, is nearly 10 years the fastest growing valve, high temperature and high pressure, and to large diameter, high sealing function of the direction, long life, good adjusting features and a valve development.Disadvantages: the butterfly valve relative to the gate, ball valve pressure loss is relatively large, it is suitable for pressure loss requirements lax piping system.Under normal circumstances, it is not suitable for high temperature and high pressure pipeline system.Valve is closed parts (valve) moving along the centerline of the valve seat, the valve stem to open or close the trip is relatively short, but very reliable cut off function, and because changes in the valve seat and the valve stroke is proportional to, is also very suitable for the regulation of traffic.Advantages: in the process of opening and closing, the friction between the disc and the valve body is smaller than that of the gate valve, so it is wearableThe opening height is generally only 1/4 of the diameter of the seat channel, so it is much smaller than the gate valveGenerally, there is only one sealing surface on the body and disc, so the manufacturing process is good and easy to maintain;Disadvantages: the flow resistance coefficient is relatively large, resulting in pressure lossUnsuitable for large caliber productionThe opening and closing moment is larger and the structure length is longer.

Q:Installation and operation instructions of knife gate valve

5., when installing the valve, users must reserve the necessary space for valve actuation;The wiring of the 6. driving device shall be carried out according to the wiring diagram;7. knife gate valve must be regularly maintained, shall not be arbitrarily collision and extrusion, so as not to affect the seal.

Q:What is gate well?

Explanation:Valve wells also called valve wells, underground pipelines and underground pipelines (such as tap water, oil, natural gas pipeline valve etc.) in order to facilitate the opening and closing part of network operation or overhaul when needed, a pit is a similar small room (or well), the valve installation in the pit where, for regular inspection, cleaning and dredging pipeline, to prevent the blockage of the pipeline project. The pit is called a well. There are valves, wells must have valves, but there is not necessarily a valve valve wells.

Q:What is the allowable leakage rate of the gate valve D?

In GB/T 13927, the leakage rate of the valve is divided into 10 grades, namely: A, AA, B, C, CC, D, E, EE, F, G class. And stipulates that when the order contract does not specify, the metal sealing valve according to D requirements.

Q:Z45T-10 what kind of material is the gate valve?

Cast iron, sealed with copper alloy inside. Shanghai Yu Cheng fluid on the professional production of this thing,

Q:What are the differences between the gate valve and the cut-off valve?

The operating principle is different. The stop valve is an upward stem type, and the handwheel rotates and rises with the stem. Valve is hand wheel rotation, stem upward movement. Flow is not the same, the gate valve requires full open, the cut-off valve is not the same. The gate valve has no inlet and outlet direction requirements, and the cut-off valve has the required inlet and outletAt the same time, usually with the cut-off valve instead of gate valve, but the valve can also be used instead of cut-off valve. Valve sealing performance better, but the size is generally not large, the size of the gate valve can be done great.The main difference between them lies in:1, different structure, gate valve structure is more complex than the height, larger size, from the appearance point of view than the cut-off gate valve is short and high, especially the gate height space needs a higher open bar, the selection in the installation space under the condition of limited attention to.2, sealing surface, valve in the opening and closing valve and the valve seat surface always contact and friction between the sealing surface, and thus easy to wear, especially in close off the valve when the valve before and after the great pressure, sealing surface wear is more serious. And the valve once the valve is in open condition, it's seat and disc sealing surface between, not in contact,

Q:What is the difference between gate valve and gate valve? Is it the same valve?

The valve is driven by the valve stem to make vertical lifting of the plate inside the valve body.Gate valve is the same reason. The gate valve and gate valve have steel gate, parallel double gate and so on.So the gate valve and gate valve are the same valve. It's just a different name.