Truck with 7.0t Diesel Forklift 6meter Mast Height
Type:Powered Pallet Truck
Load Capacity:5T - 10T
7.0t Diesel Forklift with 6meter Mast Height
Suspension vehicle body
Smart damping of door frame
Hydraulic electronic gear shifting
Advanced damping seat
Perfect curvy shape
Main engine made in China
With four-front wheel.
History: 10 years experience of manufacture IC forklift truck;
Scale: Working area of 30, 000 square meters, more than 300 employees;
Technology: Professional technical engineers and R&D team;
Management: Scientific management and strict quality control system;
Equipments: Advanced automatic production line and test equipment;
Innovation: Continuously diversify products range to satisfy customers;
Production capacity: 400UNITS/month;
Marketing network: America, Europe, Asia, Africa, Middle east, Australia and etc;
|5||Fork size||L×W×T ||mm||1220×150×70|
|Size||7||Overall Dimension||Length(to fork face)||mm||3580|
|9||Mast lowered height||mm||2625|
|10||Height When Mast Lifting||mm||6000|
|12||Turning Radius min||mm||3370|
|15||Ground Clearance min(no load/full load) mast/frame||mm||174/145190/180|
|21||Service Weight(include battery ) ||kg||9350|
|Diesel Engine||24||CY6102||Rated Output||Kw/rpm||81/2500|
|29||Operating Pressure for Attachment ||Mpa||18|
- Q:Why are there two kinds of special equipment operators
- Normal, like driving license and driving license.First, it will drive and then operate
- Q:How to test a forklift
- Information provided by the applicant: Health certificates of medical institutions above the county level; To participate in the certification of safety technical training in the training qualification institutions; received The administrative service center security window accepts Examination and evaluation Education training co., to review the relevant information of the applicant, apply to the provincial bureau examination center for the examination of the application, and examine the applicant. Send the applicant's answer sheet to the provincial electronic examination paper.
- Q:What about the exhaust fumes of the internal combustion fork in the workshop
- A forklift exhaust gas purifier. Shanghai jiekai supplies imported forklift exhaust gas purifiers, which is 90 percent efficient.
- Q:What are some of the common failures of forklifts?
- Forklifts cannot be started with the following conditions: 1, the battery without electricity Failure of starter The key switch is bad 4, the oil pump does not supply oil 5, there was no oil tank 6, no oil 7, the crankshaft lock The engine was completely scrapped
- Q:Where are the advantages and disadvantages of a battery lifter and a diesel forklift
- Working parts of 3. The work part is the direct work of the forklift truck for loading and unloading, which is grouped by the following sections: (1) the tools of withdrawal. It is a variety of work items which are represented by the cargo fork, which is used to fork, pick and shovel the goods. (2) lifting shelves. To install the cargo fork or other work item, and drag the goods up and down. (3) the door frame. It is the skeleton of the work unit, and most of the zero parts of the work unit are installed on the door shelf. The two-section door frame consists of the outer door frame and the inner door frame of the lower lift. The three-section door frame consists of three doors, internal, medium and outer. (4) the leaning mechanism of the door frame. The reclining of the door frame is made up of inclined oil cylinders. (5) the lifting mechanism. Drag and drop power plant and traction gear. It is composed mainly of sprocket, chain and lifting cylinder. (6) hydraulic control system. It is a combination of the lifting of the cargo and the tilt of the door frame and the other actions performed by the hydraulic system. It consists of hydraulic components, pipes and manipulators
- Q:How is the forklift card checked online?
- The forklift card is not easy to check on the Internet, you can go to the issuing authority to check, go to that to say a bit
- Q:What are the types of forklifts?
- Forklift can be divided into three categories: internal combustion forklift, electric forklift and storage forklift. (1) internal combustion forklift truck is divided into general internal combustion forklift truck, heavy lift truck, container forklift truck and side forklift truck. (1) general internal combustion forklift Generally use diesel, gasoline, liquefied petroleum gas or natural gas engine as power, load capacity of 1.2 ~ 8.0 tons, homework channel width is generally 3.5 ~ 3.5 meters, emissions and noise into consideration, usually used in outdoor, workshops or other places with special requirements for emissions and noise did not. Due to the convenience of fuel replenishment, long time continuous work can be achieved, and can be suitable for work in bad environment (such as rain). (2) heavy forklift Use diesel engine as power, carrying capacity of 10.0 ~ 52.0 tons, is commonly used in heavy goods wharf working outdoors, iron and steel industry, etc. (3) container forklift Use diesel engine as power, carrying capacity of 8.0 ~ 45.0 tons, generally divided into empty container stacking machine, positive &heavy container truck and container cranes. Apply to container handling such as container yard or port terminal.
- Q:What is the engine displacement of 3T forklift?
- Displacement is an important structural parameter that measures the size of the engine. The engine's performance indicators are closely related to the emissions, and generally, the larger the vehicle's emissions, the higher the power. It is commonly used as the basis for evaluating different engine sizes.
- Q:About the safety of driving forklifts
- Keep in mind that the goods are overloaded and don't try, or you will be fired by your boss. Insert the insertion of the teeth, the distance between the teeth, the higher the load, the lower center of the drive.
- Q:I want to learn about the forklift truck. I don't know how well the forklift man works.
- Find a job that is easy to find, and go to the feed factory. At least 3,500 in January, there are five to six thousand, and I did it at the feed factory. You can also go to the electronics factory, but the salary may be more than 3, 000, but it's fun and easy. The answer can help a friend's words, thanks
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range