Product Name: 7.0T Disel Forklift Truck with Good Price
CHARACTERISTIC AND DIAMENSION
MAST TILT ANGLE
FRONT OVERHANG（Wheel center to fork face）
OVERALL LENGTH（Without fork）
MAST LOWERED HEIGHT
MAST EXTENDED HEIGHT （With Backrest）
Overhead Guard Height
TURNING RADIUS (outside)
LIFTING （Full load）
POWER AND TRANSMISSION
FUEL TEAK CAPACITY
ELECTRICAL SHIFT/MANUAL SHIFT
For Transporting Goods
Put into containers.
Q1: Why buy Materials & Equipment from OKorder.com?
A1: All products have its ISO certifications, adheres to the highest standards and a commitment to supply chain safety and customer satisfaction.
Q2: How do we guarantee the quality of our products?
A2: We have established an advanced quality management system which conducts strict quality tests at every step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances as required.
Q3: How soon can we receive the product after purchase?
A3: Within three days of placing an order, we will begin production. The specific shipping date is dependent upon international and government factors, but is typically 10 to 30 workdays.
Q4: If we can produce some 7.0T Disel Forklift Truck with Good Price according to customers request?
A4: Yes, we can produce 7.0T Disel Forklift Truck with Good Price according to the difference country situations to make it suitable to the market and customers. We have very professional technical team to make the design.
Q5: How to make a quick resolution for after service?
A5:We have overseas branches all-around of world, If needed, the seller shall dispatch 2 engineers to the buyer's site for supervision of training. The buyer shall make available of necessary facilities &skilled personnel at site for training.
- Q:How to start a forklift? Say detailed point
- Before leaving the forklift: the door stands slightly forward, and the cargo fork naturally lowers; If a cargo fork does not fall to the ground, there is a danger of stumbling and harming the body; The direction handle is in the neutral position; Pull on the brake handle; Turn off the key and remove the key. Parking in designated places: the parking area must be strong enough; Stop where traffic is safe; Not to park in the vicinity of fire hydrants and affect fire control passages; Stop at or near where inflammable substances are made; Don't park your car on the slope. Charge: to prevent the charging device from being damp, and the ventilation condition in charge of the charging station is better to emit the smell from the battery. When charging the forklift battery, be sure to mark the charge. When the battery is charged, the positive and negative are unable to take the reverse. Do not overdischarge, do not use the forklift truck to stop, when the battery capacity alarm is flashing, the battery needs to be charged. On the incline, Empty car up and down the slope - if the car is over the slope, it needs to be rolled back up and down the slope. The center of gravity will fall on the front wheel. Go up and down the slope.
- Q:How much oil the three tons of forklifts are for a kilometer
- Hello, forklift is not as mileage calculated as a car. There is a working timer on the forklift truck, which is calculated on the basis of hours of work, which is how much oil is consumed per hour.
- Q:How does the fork of a forklift know that there is no balance
- Heavy load balance: is a problem distortion for the test fork or not. The payload is placed in the middle of the cargo fork. Stop at a few centimetres from the ground (for safety) to measure or measure. The fork tip is separated from the ground. Can be measured.
- Q:Where is the enterprise forklift special operation certificate?
- The operation certificate of special operation of the forklift truck is handled in the administrative service center. A special operations training organization shall apply for a certification procedure The training courses for special operations must be reported to the city security bureau in advance. The special operations training organization shall, in the week before the application for examination, be submitted to the municipal security bureau for reference. 3, city bureau to apply for the inspection report, and training institutions agreed to the inspection date and send inspection member to the examiners training institutions, examination paper copies, according to the register population to determine test after sealed by the inspection member carry. After the evaluation is over, the appraisals will be evaluated within 2 days.
- Q:How is the forklift card checked online?
- Click on the "special equipment management" section; On the right, you will see a "operator" under the "integrated query" section. Click "operator" to enter the "national special equipment practitioner information query system"; Enter the query system to click the "operator query" entry, enter 3 items: name, id number, forklift card number, according to the query
- Q:How many years can you use a forklift battery
- The battery will produce the gas during the charging process, should keep the charging area ventilated well and there is no open fire. 4, in any case, in the process of charging the electrolyte temperature should not exceed 45 ℃, otherwise should try to cool down, such as to reduce the charging current, measures such as artificial cooling or pause charge, after waiting for the temperature drop charge again. It is strictly forbidden to put metal tools on the battery. There is no excess clutter on the battery.
- Q:How does flexsim implement a forklift truck to move the product to the shelf
- Press the A button to click the staging area, hold down the mouse button, drag it to the shelf, and release the mouse button on the shelf. This completes the A connection.
- Q:There are several possibilities for a forklift battery bomb
- There are several reasons for the battery explosion, first of all, the battery is caused by a normal internal short-circuit.
- Q:What is the engine displacement of 3T forklift?
- Engine Displacement is the total volume of Engine Displacement, the product of Vh and number of cylinders. The cylinder work volume refers to the volume of gas that the piston has swept from the top to the bottom, which is also known as the single cylinder, which depends on the diameter of the cylinder and the stroke of the piston.
- Q:Is a forklift and a hug a car
- Is a kind of car. The forklift truck is a self-propelled loading and unloading machine with a doorframe and a fork. It can be used to load and unload the goods. It can also be used for handling and handling of special items and bulk materials.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range