Diesel Forklift Truck 8ton
Load Capacity:5T - 10T
Production Capacity:500 units / month
Forklift truck, diesel forklift trucks CPCD80
Japanese TCM technology
Load capacity 8 tons
VM300( two stage mast, lifting height 3.0m)
With Chinese famous Zhaocai diesel engine or Japanese famous ISUZU diesel engine
Hydraulic transmission (same supplier as TCM)
Pneumatic tyres, dual front wheels
Diferent colors are available).
|4||Gearbox change speed type||Hydraulic|
|7||Wheels||Front/Rear||Dual front wheels|
|9||Free lift height||mm||200||200|
|11||Mast tilt angle||Fwd/Bwd||deg||6/12|
|12||Overall length (without fork)||mm||3940||4258|
|14||Mast height fork lowered||mm||2695||2845|
|15||Overall height fork raised||mm||4374||4297|
|16||Overall height (overhead guard)||mm||2565|
|17||Turning radius (outside)||mm||3700||3900|
|18||Load distance (centerline of front axle to front face of forks)||mm||700||733|
|19||Minimum Aisle -90 degree stack(Add load length and clearance)||mm||3310||3540|
|23||Min. Under-clearance ||Bottom of mast||mm||245/205|
|24||Bottom of frame||mm||343/323|
|Performance||25||Speed||Travel Max.||With load||km/h||24|
|Brake||41||Brake||Service ||Hydraulic-Foot pedal|
|Transmission||43||Battery||Voltage / Capacity||V/AH||2-12V/100AH|
|44||Internal combustion engine||Model||Zhaocai / ISUZU Engine|
|45||Rated horsepower||Kw/rpm||81/2500 / 82.3/2000|
|46||Rated torque||N.m/rpm||353/1650 / 415/1400-160|
|47||Number of cylinder||6|
|49||Fuel tank capacity||lit||140|
- Q:How many ways to push the forklift truck?
- There are three main types of propulsion: one is the internal combustion forklift, the other is the electric forklift truck, and the third is the hybrid forklift truck. The internal combustion forklift is divided into regular internal combustion forklift, heavy lift truck, container forklift truck and side forklift truck.
- Q:What are some of the common failures of forklifts?
- Forklifts cannot be started with the following conditions: 1, the battery without electricity Failure of starter The key switch is bad 4, the oil pump does not supply oil 5, there was no oil tank 6, no oil 7, the crankshaft lock The engine was completely scrapped
- Q:What are the procedures for buying a forklift?
- Special equipment operator (original and photocopy); Product quality certificate (original and photocopy). Note: all copies need to be covered with the official seal.
- Q:There are several forklift drivers in China
- Widely used in the national economy, such as station, port, airport, factory, warehouse, etc., it is an efficient equipment for mechanized loading and unloading, stacking and short distance transportation
- Q:Whether there is a national standard or standard for the charging of forklift truck in the factory
- The battery charging or storage site should be kept well ventilated, with ventilation and ventilation facilities to prevent the explosion of combustible gas. Smoking in the charging room of the forklift truck is prohibited from smoking. No phone calls in the rechargeroom, such as phone calls to the charging room. 3, as the electrolyte in the battery is a mixture of sulfuric acid and aqueous solution, toxic and corrosive, so when to battery charging and near its must wear overalls and protective glasses. If your skin or eyes are stained with electrolyte, rinse immediately with water and if you have an electrolyte in your eyes, turn to your doctor immediately
- Q:But they had heard jac forklift, now out a new model seems like three years warranty, feeling pretty good, now dare to do three years warranty of forklift jianghuai should be the first.
- A: in general, the warranty period for forklifts is one year, and the main components such as engines are two years
- Q:How to change oil for a forklift, no slots and jacks
- This is not realistic, the engine is under the seat, and the oil is in the oil pan, and the oil pan is at the bottom of the engine. You can on the ground to look at and see if we can see put the oil of the luo silk, stretched out his hand and touched not to touch, so if touch to still can put oil, touch can only transport channel, the hope can help you
- Q:About the safety of driving forklifts
- Keep in mind that the goods are overloaded and don't try, or you will be fired by your boss. Insert the insertion of the teeth, the distance between the teeth, the higher the load, the lower center of the drive.
- Q:What is the difference between a forklift and a small 5t?
- The thickness of the fork is different, the thickness of 5 tons is 5mm, the length is different, the total weight is different. The engine is different, too. So the price is quite different. Different tonklifts are recommended for the operating conditions.
- Q:How to solve the oil spill?
- Forklifts will run into a variety of problems, affecting both work efficiency and quality of work and causing unnecessary waste. However, before the problem occurs, the failure prevention measures of forklift should have a better effect on the occurrence of the failure. Here's a look at how forklifts can prevent oil spills. Measures to prevent oil spills: carefully dispose of various liners. Be like oil tray or valve cover cover, because contact area is big, not easy compaction, can cause oil leak easily. Tighten the nuts by the repair specification. The underpining of the padding will grease the oil; Too tight will cause the metal to bulge or twist the screw to cause the leak. Timely replacement of failure oil seal. The oil seal is improper, the shaft neck is different from the oil seal, it is easy to dump the oil because of the bias. Some after use for a long time, will lose elasticity, due to aging of rubber sealing lip crack damage or failure, since the tight spring will loss in sealing effect, should be in accordance with the standard repair or replace the qualified parts. Replace the badly worn machine parts in time.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range