Tile Edge Finishing Trim from CNBM Group
- Ref Price:
-
$5.00 - 20.00
/ pc
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 200000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Insulation & waterproofing solutions - CMAX XPS board
Product name:
CMAX board (as known as construction board, tile backer board, insulation backer board, waterproof backer board, wet room backer board, XPS board.)
Product structure Tile Edge Finishing Trim:
CMAX boards are made of high-performance waterproof extruded polystyrene (XPS Board), it has a 0.75mm coating on either side comprising a glassfiber mesh embedded in a polymer cement mortar.
Outstanding characteristicsTile Edge Finishing Trim:
Both insulation and waterproof.
Product appearance Tile Edge Finishing Trim:
The boards have straight edges. The color of the surface is grey and the core material is light blue.
Working temperature range Tile Edge Finishing Trim:
50 to +80 °C
Standard dimensions and weight Tile Edge Finishing Trim:
Thickness(mm) | Weight(kg/m²) | Length by width(mm*mm) |
6 | 2,7 | 1200 x 600 |
10 | 2,9 | 1250 x 600 |
12 | 3,0 | 2500 x 600 |
20 | 3.1 | 2500 x 600 |
30 | 3,3 | 2500 x 600 |
50 | 4,2 | 2500 x 600 |
The board has the following tolerances:thickness:± 2mm width:± 2mm length:± 3mm.
Reaction to Fire Tile Edge Finishing Trim:
The boards are classified as class E according to EN 13501-1. When the boards are covered with tiles, their fire performance should comply with local construction laws and regulations.
Effect on indoor environment Tile Edge Finishing Trim:
CMAX board has been assessed as not emitting any particles, gases or radiation that may have a negative effect on the indoor climate or to have any significant effect on health.
Environmental declaration:
The product does not contain any substances on the observation list of dangerous substances published by the national environmental authorities.
Main applications:
Used as a watertight layer on walls and floors in houses, hotels and other wet areas such as bathroom, shower room.
Other applications:
Other places to be insulated and waterproofed.
Applications:
1. as a watertight layer on walls and floors in wet rooms and bathrooms.
2. as an insulation layer in under floor heating to avoid heat loss.
3. as partition walls in wood or steel frames.
4. substitute for gypsum board and fiber cement board; insulation and waterproofing; lighter so that more easily to install.
5. As enclosures for bathtubs, water pipes, etc.
6,Can very easily and fast formed to be small shelves, washbasins, shower benches and soap boxes.
7. Combining with CMAX curved/shapeable boards, kinds of decorative models can be made with your infinite creativity.
Fixing:
Choose a way to fix CMAX board according to the substrate to be fixed. Normally, using modified tile adhesive for solid concrete wall/floor and strengthened by mechanical fixings when necessary while only using mechanical fixings for wood and steel frames.
Reinforcement:
1. Dry areas: reinforce all joints between boards, floors and walls by 125px or 250px wide self-adhesive tape.
2. Wet areas: reinforce by suitable waterproof tape.
Waterproof strengthen:
1. Strengthening all joints between boards, floors, walls and mechanical fixings placements by suitable waterproof tape.
2. Strengthening joints between walls, outside corners and inside corners by special corners.
3. Sealing pipe holes with special waterproof tape.
4. Strengthening once again by waterproof glue, liquid tanking membrane, tanking membrane paint, etc. when necessary.
Coating of panels:
Should always be covered by ceramic tiles, mosaics or other equivalent non-fireproof materials after installation.
FAQ:
1.
Q: Are you a manufacturer of insulation materials?
A: Yes. ourselves manufacturer of thermal insulation board.
2.
Q: What is the seaport near your plants?
A: The nearest port is Shanghai Port, there are about 100km from the port to our plant in Shanghai.
3.
Q: What is annual production capacity of your main products?
A: 200,000 piecs per month.
4.
Q: Do you have your own brands? And what are they.
A: Yes. we are a fortune 500 company, our brand is "CMAX"
5.
Q: Is sample available for testing?
A: Yes. The sample is free.
We do OEM as well. Welcome to make an enquiry and we will give you quick response in 12 hours!
- Q:What is the difference between an extruded board and an XPS extruded board?
- 1. Civilized construction program 2. Safe construction program 3. Template construction program 4. Scaffolding construction program 5. Sambo four construction program 6. Temporary electricity construction program 7. High operating construction program 8. Tower crane construction plan 9. Multi-tower operation anti-collision construction program 10. Emergency emergency plans 11. Winter rainy season construction program 12. Significant hazard assessment measures 13. Construction organization design 14. Building energy conservation program 15. Basket construction program 16. Tower crane hoisting program
- Q:Roof insulation layer is extruded polystyrene foam plate how set the amount of set
- A type is generally used for pool or wear interior wall, B type for wearing structure (building) building facades Type I seals are suitable for general waterproofing requirements and Type II is suitable for tighter watertight requirements Applicable temperature range: -20 ° C ~ +80 ° C When the wall and pump or booster equipment into the inlet and outlet pipes, it is appropriate to set up a flexible connection at the connection I remember that we are usually the construction of the pipe through the casing into the pool, and then sealed with oil linen casing
- Q:Steel structure rock wool sandwich wall panel what the amount of this set
- Indoor insulation is generally made of "polystyrene foam board", the general thickness is 2..3 cm thick, you can understand clearly, in the end is how thick the foam board (when playing screw holes, can be found is thick thick foam board) The First play expansion bolts, do insulation, can say the details of the point. There is that you can use .7 inside the expansion of the screw, to Fu Fu Huang Peng, You can also use welding, then a long screw, is also very simple.
- Q:Roofing the top of the extruded polystyrene insulation board generally how much weight ah?
- The bar spacing is called 'step distance', 1.2 ~ 1..1.8m, no minimum spacing, maximum 1.8m. Pole spacing 1..1..1.55m, no minimum spacing, maximum 1.55m. See JGJ130 Haifa Fenzhuang Curcuma Gufeng Koufukai -2011 "Construction Construction Fastener Steel Scaffolding Safety Technical Specification" 'Structural Requirements'.
- Q:The traditional ceramic insulation board, the existing thermal insulation coating in addition to the process and the construction period there are similarities and differences there are differences? Which energy-saving building is better?
- In when Edison in the study of incandescent bulbs, in the white hot filament inserted between a metal sheet
- Q:Steel plant wall plug color steel tile, the glass glass inside the glass, hanging in color steel, how construction? How is the cost associated with a single sandwich panel?
- More than 24 meters need to use cantilevered scaffolding, and the spacing of not more than 20 meters
- Q:I set up in October 2008, the production of XPS board - that is, with the extinction of polystyrene foam plastic plate, is an energy-saving environmental protection materials. Consult experts: I can enjoy the relevant tax incentives?
- The cast iron pipe is the old type of hand-cast iron pipe, which is a non-flexible pipe
- Q:Extruded Polystyrene Board, Polystyrene Foam Board and Expanded Polystyrene Board
- It is a white solid with a fine closed-cell structure which is heated and preformed in a mold by heating before it is made of a volatile liquid blowing agent.
- Q:Sound insulation and polystyrene insulation board which sound insulation better?
- The best bamboo pole, or plastic, aluminum alloy, then there is no child at home can have a child, then it is dangerous to fall easily hit people
- Q:Why extruded board (XPS board) is the best insulation board material
- Rong Sheng this section is quite good, the appearance of fashion, quiet, energy saving, computer temperature control, insulation effect is good
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Tile Edge Finishing Trim from CNBM Group
- Ref Price:
-
$5.00 - 20.00
/ pc
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 200000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
