Q:How do graphitized electrodes differentiate between high power and low power?

In electrolysis industry, using graphite anode plate as the anode has a history of more than 100 years, the metal anode is in recent decades, the research and application of metal anode in China late last century, only in 70s the technology related to the research and experiment of metal anode, anode on electrolysis industry, mainly through the silver (2%) (0.5%): low silver lead silver alloy, lead and silver tin antimony alloy, lead calcium alloy and lead silver alloy adding nucleating agents and several stages.

Q:Graphite graphite graphite graphite electrode what is the use?

Of course all conductive graphite gray, conductive powder is used for professional conductive, the conductivity is different, in order to achieve its electrical resistance value, the graphite powder of different particle by the ratio to reach the ideal value of resistance. Graphite powder is pure graphite powder, requirements of mesh consistent, high purity.

Q:Can graphite be used as an electrode for electrolysis of silver in silver nitrate?

If it is molten, it can be made out of silverFor solution, only AgNO3+H2O== electrolysis ==Ag+HNO3+O2 is analyzedWhen the HNO3 concentration is enough, it will continue to react with Ag.... So you can't get Ag elements.

Q:What is the difference between pyridine type nitrogen and graphite type nitrogen?

The fine structure graphite is the raw material used in the production of graphite electrode. The particle size is relatively small, generally below 0.5.

Q:Why use platinum ferroalloy instead of iron as electrode?

Its surface properties must comply with the characteristics of the additives so that they can be dispersed evenly.

Q:Why should supercapacitors use graphite as electrode material?

Because graphite material, light weight, good thermal conductivity and conductivity.

Q:Use of graphite in steelmaking

At present in the world (MgO-C brick raw material for graphite and magnesium) as refractory material, has been widely used in steelmaking, has become a traditional use of graphite.

Q:What is the difference between SGL graphite electrode and graphite electrode in general?

In fact, the graphite electrode abroad (including Japan) in several ways than we can control the fine, one is pure, another is anisotropic (resistance, thermal conductivity ah) usually do some control, in the strength of domestic now is also doing well, but when we are comparing high quality products, general domestic products it is basically a piece of the indicators are poor

Q:Which department in the steel plant needs graphite in large quantities?

The variety and specifications of graphite electrodes used in modern EAF steelmaking are mainly determined by the technical parameters of the steelmaking furnace. With the development of EAF steelmaking technology, the steel-making technology is developing towards large scale and ultra high power. The graphite electrode is mainly made of large size graphite electrode and ultra high power graphite electrode.

Q:What is the reason that the current cannot be increased when the graphite electrode is used for anode electrolysis?Add calcium chloride and sodium bicarbonate into electrolytic water

Because in the process of electrolysis of water in cathode electron generated hydroxyl, the alkaline solution increased. But with the hydroxyl reaction of sodium carbonate and sodium bicarbonate, carbonate and calcium ions exist at the same time, must produce the precipitation of calcium carbonate, the ion in the solution is reduced, thereby conductive resistance increases. Thus weakened over time current cannot be raised