Silicon Carbide Ceramic Filter Plate for Foundry
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 10000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Silicon Carbide Ceramic Foam Filter work at more than 1500 Degree Celsius, filter moten iron and copper in related casting.
Silicon Carbide Ceramic Foam Filter
Ceramic Foam Filter is the third generation filter, compared with traditional filtering materials(ceramic honeycomb filter, extruded filter), our Ceramic Foam Filter have the advantages as below:
1. High thermal stability, stable chemical composition in high temperature,avoid the chemical reaction with the filtered molten metal.
2. High mechanical strength, large specific surface,efficient in purifying the metal flow.
3. Lower the filtering head loss,easy-operating,save energy. Smooth the metal flow,avoid the spray, spatter and backset,improve the exterior quality of the casting product,prevent the pore disfigurement,reduce the inferior rate.
4. Various size, shape and aperture,suitable for kinds of casting technique.
The Ceramic Foam Filter are widely used in non-ferrous metal smelt, Foundry Industrial of Copper, Aluminum Alloy, Cast Iron, Cast Steel and high temperature fume separator, special filling. silicon carbide ceramic foam filter been used to filter molten iron and copper liquid in the iron casting industry, improve the casting product quality highly.
- Q: What filter material are placed in the aquarium filter?
- Generally let off the filter cotton and ceramic rings, there are biochemical balls, coral bone, stone, activated carbon and so onConditional: filter cotton, ceramic ring, biochemical ball, coral bone, stone, activated carbon
- Q: Performance advantages of ceramic filter
- A ceramic filter for fine coal mud recovery, there is a base, the lower part of the frame is provided with a fine slime liquid trough, the fine slime liquid material groove is provided with a liquid level controller, the slime liquid material at both ends of the groove is provided with a negative pressure water tank, the water tank is provided with a negative pressure suction connection assembly fixing the other side is provided with a vacuum pump pipeline, the pipeline is communicated with a vacuum pump and vacuum pump;
- Q: Working principle, ultrasonic trouble and troubleshooting of ceramic filter
- It is based on the action principle of capillary pore and realizes the solid-liquid separation through the capillary action principle of the micropore. Specifically, is the use of microporous ceramic plate water impermeable properties, extraction of ceramic plate and external cavity vacuum pressure, the suspended material groove under the action of the negative pressure adsorption on the ceramic plate, solid material through the porous ceramic plate can not be trapped in a ceramic plate surface, and the liquid due to the hydrophilic effect of vacuum pressure difference and ceramic plate by entering the gas-liquid distribution device, and then discharged or recycled, so as to achieve the purpose of solid-liquid separation.
- Q: What are the causes of the powder moisture in the ceramic filter?
- Generally, the ceramic filter is used to filter iron powder, and the water content of the filter cake is about 10%.
- Q: Ceramic filter fineness thin mud suction is not what to do more
- With ceramic filter to treat pulp dehydration, the particle size is too large, the particles are easy to precipitate, the particle size is too small, too much mud, then the water content of the filter cake will increase, and the life of the ceramic filter plate will be reduced.
- Q: Common troubles of ceramic filter
- The metering pump is not working properly and backwash water into the bucket of acid. The main reason is that the metering pump is not switched on, the diaphragm is worn out, the frequency is too low, and the check valve of the acid pipe and backwash pipe is worn out.
- Q: What is the reason that ceramic filter does not absorb mineral powder?
- In order to avoid frequent fluctuations in pressure and pressure within a short period of time, a buffer cylinder with a stabilizing effect is provided in the backwash pipe.
- Q: The vacuum of ceramic filter is not enough
- Maybe the vacuum meter is broken. It doesn't show or show the data is different from the actual data.It could be the source of the vacuum, the vacuum pump failure.Pipeline leakage: vacuum system connecting pipes (metal pipes or rubber pipes) corrosion, aging and water leakage.Distributor head leakage: wear or poor sealing.Leakage of ceramic plate: rupture of ceramic plate.Other reasons.
- Q: Ceramic filter suddenly do not smoke, a little later on their own good, what reason?
- The size of ceramic filter is generally on both sides of the vacuum tank, such as 50 square meters with 5 square meters of ceramic filter / ring ceramic filter plate combination (possible), there are 10 discs, the ceramic plate left a vacuum tank on the left of the 5 disc for filtration, vacuum filtration tank for the ceramic plate on the right right of the 5 disc. If a vacuum system temporarily fails, it may cause poor suction, no suction, and a normal operation at the other end.
- Q: How to determine the quality of ceramic fiber filter board simply?
- Ceramic fiber board quality can be judged from the following aspects:1, appearance. The surface is flat and the cutting surface is well arranged, and vice versa.2 density. Press the hands, and the surface is soft and smooth.3, process. Vacuum suction and continuous production process.4, cross section, slag ball content is low.
Send your message to us
Silicon Carbide Ceramic Filter Plate for Foundry
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 10000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
