PVC Pipe Plastic Building Materials Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
2.Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:Difference between non-standard rubber joint and national standard rubber joint
- Rubber joint national Ministry of water conservancy is standard CJ/T208-2005 documents of rubber joint standard, this paper has clear rules for the product, identify the products should meet the following characteristics: standard rubber joint extrusion is produced by the rotation of the screw, the glue is advancing, and with the help of the mouth, but the needs of various semi-finished extrusion the shape of the. The extrusion process is characterized by uniform and compact quality and easy conversion of semi-finished product specifications and section shapes. The extrusion process of the national standard rubber joint in the extruder is divided into two parts: one is the extrusion system used for pushing the rubber; the two is the die system, which is used to form the rubber to make a definite section shape. Therefore, in the process of pressing, the rubber layer is usually more than ten layers, and the rubber joint has the characteristics of compact structure and high pressure resistance.Non-standard rubber joint is in the national standard between substandard products and national standard products, often illegal businesses use to reduce the rubber joint, the number of layers to reduce the cost of rubber joints. Use non-standard products instead of GB products. Non-standard products in use process, because the arc bearing layer, rubber layer is insufficient, the strength drops, in the use process is easy because the pressure withstanding insufficient causes the pipe network to burst.
- Q:How to install the water hose and do you use the tape? Or direct installation?
- Installation of water hose, joint with PVC (or metal pipe) head, the end of the connector with 8 iron wire at least two tied, and tied together at the end of a piece of wire;
- Q:High pressure hose crimping connector, pressed on what position can effectively prevent the head off?
- The amount of compression in the joint core or material needs to be improved. If the joint can not be changed, can try to head off premise, reduce the withholding amount, to avoid excessive damage to the hose wire crimping.
- Q:What is a rubber core pulling method?
- For short component hole, a hose can be used to bend through two parallel holes; if it is used for retaining hole of long component, the two hoses of anchor can be connected by iron sheet sleeve. The length of the bushing should be 400 - 500mm, and the inside diameter should be 2 - 3mm larger than the outer diameter of the hose. The fixed position of steel derrick hose available, spaced not more than 0.5m, and fasten with steel skeleton.
- Q:Carbon dioxide gas shielded welding torch wire feed hose joint, that steel wire can not be drawn out, how to solve it, with welding?
- Some of the torch wire feeding hose can not be replaced, it is fixed dead, such as Xiong Gu, Lincoln's self shielded flux cored wire, welding torch.
- Q:The rubber tube of the gas cooker is aging. It's leaking. Can you change it for yourself?
- This brand has been doing for more than 20 years, you can go to the store to find, certainly some, safety first, trouble trouble point.
- Q:What is the function between the rubber pipe joint and the installing pipe?
- The inner seamless seamless rubber joint prevents the corrosive medium from eroding the inner wall of the rubber joint and improves the service life in the high temperature resistant, acid resistant and oil resistant pipes.
- Q:What about leakage of hose joint?
- First, the water source is cut off, then the male and female nuts which are connected with the compression joint are removed, and a plurality of threads are screwed on the thread to seal the rubberized fabric, and then the connector is re assembled.
- Q:Acid burette and how to distinguish the basic buret
- Alkali: rubber tubes. Acids: glass tubes (remember: NaOH and glass reactions. So rubber)
- Q:Petroleum gas has a corrosive effect on ordinary rubber pipes and is easy to cause air leakage. So, what kind of hose must be used?
- Petroleum gas is corrosive to ordinary rubber pipes and gaskets and easy to cause air leakage. Therefore, it is necessary to use rubber pipes and gaskets with strong oil resistance
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Pipe Plastic Building Materials Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
