Led Tube Lights T8 high luminous efficacy AC directly drive
- Ref Price:
-
$3.20 - 3.50
/ pcs
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5 PCS
- Supply Capability:
- 500000 PCS/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Products features
1. Aaward-winning technology of 2014 Geneva International Exhibition of Inventions
2. Patented AC (Alternative current) directly drive.
3. No LED driver design, replace the LED driver by AC chips, more stable and reliable.
4. Prolong the service life of T8 tube to 50,000 hours, it is 2 times as long as traditional driver.
5. High light efficiency. Use high quality SMD chips to ensure the high light efficiency
6. Low lumens depreciation. Less than 3% per year. The users needn’t to replace the tube during 4-8 years.
LED T8 tube 18W | |
Electric parameter | |
Power | 18W |
Voltage | 160～270V AC，50/60Hz |
Power Factor | ≥0.95 |
Operating Temperature | -40℃~50℃，20%~90% H.R. |
Storage Temperature | -40℃~80℃，10%~90% H.R. |
Optical parameter | |
Color Temperature | 5500-6300K |
The LED type | 5630 SMD LED |
Number of LED | 80 PCS |
Angle of LED | 120（Degree） |
Luminous Flux | 1530Lm |
Photosynthetic efficiency | ≥85Lm/W |
Physical parameter | |
Level of Waterproof | IP55 |
Service life | 50000 H |
Electrical categories | ΙClass |
Lamp cover material | High light transmittance glass tube |
Lamp cover color | Milk white |
length | 1200mm |
diameter | 26mm |
Lamp weight | 0.41Kg/0.904lbs |
Mode of package | 30Units/Ctn |
Package measurements | |
Package weight | 15.3KG （33.8lbs） |
Revolutionary no driver LED, Alternative directly drive, high efficiency and stability
Pioneered the AC directly drive LED solution, replaced the traditional LED driver by TF-11 and G13 chips. The patented technology won the award of 2014 Geneva International Exhibition of Inventions. The reliability and service life of LED are improved enormously by AC directly drive solution. The service life of AC drive solution surpasses 100,000 hours.
High grade luminous source
Professional encapsulated SMD 5730 with high quality LED chips ensures the LED resource obtaining excellent protection of optical attenuation and the heat conduction ratio. Reduced the optical attention rate to the minimum value as 3% per year.
Triple heat dissipation, Super long service life.
Utilizing high thermal conductivity aluminum plate, high purity glass tube and no LED driver consumption, the triple heat dissipation design ensures that chips can conducting the heat rapidly. Our LED tubes are driven directly by Alternative current without delay start, unaffected by electric fluctuation. The service life of T8 tube is more than 50,000 hours and it’s 2 times than that of traditional LED driver tube. So users needn’t replace the tube in 4-8 years.
Uniform illuminance, Comfortable visual sense
The LED tubes use high luminous transmittance glass tube to reach high transmissivity, the transmissivity over 99%.
The surface of tube was frosted without light spot. The light is soft and pure spectrum, high CRI ( color rendering index )without ultraviolet ray, infrared radiation, ensure users a comfortable visual sense.
Our tube process soft light, pure spectrum, high CRI ( color rendering index ) without ultraviolet ray, infrared radiation to ensure users a comfortable visual sense.
- Q: Are led fluorescent tubes not available for lighting?
- If home have a stent is built-in LED lights to be the most is to take the rectifier, and the external power supply is to use the power of the manufacturer to provide, so to be more back to safe some more energy efficient, at the same time LED the longer service life
- Q: Does the installation of LED fluorescent bulbs need to be positive and negative
- Agreed to A solar lamp with built-in power source is not required to be divided into positive and negative. But the cooling effect is not so good. The advantage is that you can connect directly to the lampstand. External power supply of the fluorescent lamp, need points are negative, but the cooling effect will be better, and don't have to put the drive into the tube, also make the design simple, the problem is the installation of trouble
- Q: I hope my answer will help you
- There is a minimum of a spring, which can be applied to each side, and if one can be pressed in, it can remove the lamp. I hope my solution will help you
- Q: Why is the household daylight lamp attached to the battery?
- Because there's electricity in the battery.I hope my answer will work for you.
- Q: What does LED light tube integration mean
- The integral whole cannot be removed (including lamp shade, LED lamp bead, constant current source, lamp tube support), directly plug in the electric light.
- Q: How much is the ballast of the fluorescent tube coming out
- The fluorescent lamp ballast is not to be understood by the idea of the current when it is activated in the lamp tube. The lamp tube of different wattage matches the current of the ballast of different current and the current is too bright or hard to start. Inductance ballasts, for example from 8 w15w20w30w40w when it in tubes without ballast between the output voltage and the zero line is power electricity after being connected in good tubes start according to the voltage at the ends of the lamp power different lamp in 80-110 - v, about 40 w at the ends of the tube voltage 110 v. Electronic ballast is the principle of the second inversion of high frequency oscillation. The output power is achieved by the size of the current supplied by the booster coil. The single-strand wire of the 13W booster coil is made, 25W with a two-ply line of 36W with 3 strands of 55W with 7 strands of gauze, the more power the larger the need of the current. Because of using ordinary multimeter is not suitable for testing the high frequency alternating current (ac) in maintenance electronic ballast can be ignored when the output voltage and to detect components mainly including tubes.
- Q: Does the home led tube have ultraviolet light
- But when buying led lights, it should be noted that the power of a single led is uneven with leds below 0.5w, and there is a basic problem in the market
- Q: How to remove fluorescent lamp tube
- Turn off the daylight power supply; Two, the old daylight lamp two have a gap at the end of the rotation 90 degree, the double needle pulls out from the gap, the other end pulls out. Three, the old electronic rectifier without gap, is elastic, right hand hold to the right of the plastic head, left hand hold tube push 1 centimeter or so, to the right lamp tube needle left out at this moment, at the same time left hand move down the left tube face, left hand to pull in front of the tube to the left. If it is an LED tube aluminum alloy, you want to remove the contents of the inner tube, both of which have two cross screws, and the screwdriver can be removed. The leds that do not understand the electrons should not be removed. Five, the LED lamp that still has glass in the market at present, this kind of is one-time, two is to use the bad of glue stick to be thrown away, have no maintenance value. Don't take it down and you may hurt your hand.
- Q: Currently, the 48-inch led fluorescent lamp tube 18w is used for how much dc voltage
- The voltage in each company is different, and you have to ask the manufacturer.It's usually made of 2835 chips, about 60mA, or about 3.3 volts.
- Q: A set of lamps and lanterns
- Led tube specifications are t5 and t8, with a length of 0.6, 0.9, and 1.2 meters. It's also 1.5 meters. Led bulbs are now priced from a dozen to seventy eight, and different quality prices are different.
Send your message to us
Led Tube Lights T8 high luminous efficacy AC directly drive
- Ref Price:
-
$3.20 - 3.50
/ pcs
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5 PCS
- Supply Capability:
- 500000 PCS/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
