Q:What's the role of carbon brushes in electric tools?

Carbon brush specific function1. the external current (excitation current) is added to the rotor by carbon brush (input current);2., the static charge on the big shaft is introduced into the earth (carbon brush) through the carbon brush (output current);3. lead the main shaft (ground) to the protection device for rotor ground protection and measure the positive and negative voltage of the rotor;

Q:How about plug wires and cables for power tools?

Class I tools are common type power tools with a rated voltage of over 50 volts. Class I tools not only rely on basic insulation but also include an additional safety measure in the protection against electric shock. The method is that the accessible conductive parts and protection has been installed in the fixed line in the (ground) wire together, make accessible conductive parts in the basic insulation does not become damaged in the charged body. Plug for three pin plug type tool.

Q:How to detect the rotor of power tools?

Rotor inspection. 1) a self made short circuit device can detect damage. 2) you can detect with a pointer type multimeter.

Q:How are the I, II, and III classes of power tools classified?

In accordance with the electric shock protection methods, electrical equipment is divided into the following 4 categories:0 category. The device relies solely on basic insulation to prevent electric shocks. There are no ground terminals on the live conductors of the 0 types of equipment.

Q:Is there an electric tool for screwing bolts? It's bolts, not screws

Yes, electric wrench.An electric wrench is a wrench powered by a power source or battery. It is a tool for tightening bolts. It is mainly divided into impact wrench, torsional shear wrench, fixed torque wrench, angle wrench, angle spanner, hydraulic wrench, torque wrench, rechargeable electric wrench.

Q:What devices must be available for all hand held electric tools?

Anti leakage, splash prevention, anti movement, anti overheating

Q:What power tools are used as cage birds?

An electric drill or a small bench drill, drill speed is the best because of the speed change drill, drill hole spacing and easy consumption. If you want to do with special accessories can also change the distribution of wood milling, milling machine, special safety and easy to do.

Q:What's the difference between a flashlight and an electric screwdriver?

Equipped with torque regulation and restriction mechanism, electric tool for screwing and unscrewing screws, the electric tool, mainly used for assembly line. Is one of the necessary tools for most manufacturing enterprises.

Q:What kind of material does the power tool case have?

In 1895, the German overtone produced the world's first direct current drill. The outer shell is made of cast iron and can drill holes in the steel plate 4mm. Then there was a three-phase power frequency (50Hz) electric drill, but the motor speed failed to break through the 3000r/min. In 1914, there was a single-phase electric motor driven by a series of exciting motors, and the motor speed was over 10000r/min. In 1927, the power supply frequency of intermediate frequency electric tool 150~200Hz, it not only has the advantages of high speed single-phase series motor, and has the advantages of simple structure, reliable three-phase motor, but because the need if current supply is limited.

Q:Power tools are power tools?

Now, that's pretty much the case. Now most power tools are powered by electricity. However, some of them are pneumatic, especially the environment where no electrical work is required. This should be equipped with an air pump externally.Small, of course.