High Pressure GRE Pipe Non toxic of different styles
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 m
- Supply Capability:
- 30000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
PRODUCT DESCRIPTION
1.Pipe Introduction
It is the ideal product for the transportations of the chemicals, drinking water, waste water, waste gas and sewer.
2.Characteristics
• Corrosion resistance High mechanical property
• Low friction coefficient
• Light weight
• Non toxic
• Maintenance free
• Long life span
• Double O ring sealing joint make the pressurization more convenient and unique.
• Convenient and quick installation
• Long life of more than 50 years
3.Application
Due to its own advantages, the RPMP is used extensively in the city engineering water supply and drainage, the water supply and the drainage or the recycle water in the electric factory, the waste water treatment, the oil chemical industry and so on.
TECHNICAL DATA
Stiffness | SN3750 | SN5000 | SN10000 | ||||||
Pressure | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 |
400 | 6.1 | 6.1 | 5.9 | 6.7 | 6.7 | 6.4 | 8.1 | 8.1 | 7.87 |
500 | 7.2 | 7.2 | 7.1 | 8 | 8 | 7.7 | 11.4 | 9.6 | 9.4 |
600 | 8.7 | 8.3 | 8.3 | 9.6 | 9.6 | 9.2 | 12.1 | 11.7 | 11 |
700 | 9.7 | 9.7 | 9.4 | 11.2 | 11.2 | 10.4 | 13.8 | 13.2 | 12.5 |
800 | 11.6 | 11.3 | 10.6 | 12.8 | 12.5 | 11.7 | 15.5 | 15 | 14.2 |
900 | 13.4 | 12.5 | 11.7 | 14.8 | 13.8 | 12.9 | 19.3 | 16.4 | 15.8 |
1000 | 14.6 | 13.7 | 13 | 16.2 | 15.1 | 14.4 | 20.7 | 18 | 17.3 |
1100 | 16.1 | 14.9 | 14.2 | 17.9 | 16.5 | 15.6 | 23 | 19.8 | 18.9 |
1200 | 17.2 | 16.1 | 15.4 | 19.6 | 17.9 | 16.9 | 24.7 | 21.5 | 20.6 |
1400 | 20.4 | 18.4 | 17.7 | 22.7 | 20.5 | 19.5 | 29.2 | 24.8 | 23.8 |
1500 | 22 | 19.9 | 18.7 | 24.4 | 22.1 | 20.7 | 31.4 | 26.3 | 25.3 |
1600 | 23.6 | 21.2 | 20 | 26.2 | 23.4 | 22 | 33.7 | 28.2 | 26.9 |
1800 | 26.3 | 23.5 | 22.4 | 29.2 | 26.1 | 24.7 | 36.4 | 31.6 | 30.3 |
2000 | 27.4 | 25.4 | 23.4 | 35 | 32.4 | 29.6 | 44.7 | 37.3 | 36.1 |
2200 | 29.7 | 27.6 | 25.3 | 37.8 | 35.3 | 32.6 | 48.7 | 41.5 | 40.4 |
2400 | 32.6 | 30.3 | 28.4 | 41.8 | 38.8 | 34.6 | 53.4 | 44.6 | 42.8 |
2600 | 36.3 | 33.5 | 31.5 | 45.2 | 40.5 | 35.4 | 55.8 | 47.2 | 45.6 |
2800 | 39.6 | 36.0 | 34 | 49.4 | 45.1 | 42 | 62 | 53 | 51 |
3000 | 41.0 | 38.1 | 36.2 | 52 | 47 | 45.3 | 67 | 58.2 | 54 |
COMPANT DESCRIPTION
CNBM,China National Building Materials Group is a state-owned enterprise in charge of administrative affairs in china building materials industry. Established in 1984, CNBM is a large group corporation of building materials with total assets of 25 billion RMB and a total staff of 30,000.CNBM now owns 200 subordinating firms of solely owned and joint-venture companies.
CNBM International Corporation is one subsidiary of CNBM, we focus on offering good-quality products,professional service and complete solution to our customers. Strong delivery capacity, advanced technology& management, strong financing capability and excellent after-sale service are our advantages in sharing international market.
PACKAGING & DELIVERY
1.Packaging Details
Standard packing or your requirement
2.Delivery Detail
Shipped in 30 days after payment
FAQ
Q1.What's your sample policy?
A:We can supply the sample if we have ready parts in stock, but the customers have to pay the courier cost.
Q2.Can you produce according to the samples?
A: Yes, we can produce or modify the products according to your request.
Q3.How do you deliver the goods to my country?
A:We can provide international express, such as DHL, EMS, UPS, FedEx, etc. We select air freight and sea freight upon your requests. Quotations if without mentioning the shipping costs are shipping fee excluded.
Q4.How much does it cost to ship to my country?
A:When you goanna to place an order, please contact us, because different country has different freight.
Q5.How to get the catalogue?
A:please contact us and tell us what you are looking for.
We will try our best to meet customers' demands. Welcome you come here to visit us. We sincerely welcome partners around the world to establish business cooperation with us on the basis of mutual trust, benefit and development.
PICTURES
- Q:Are there any differences between FRP pipes and FRP pipes?
- The mechanism glass magnesium composite pipe is made of glass cloth, magnesium and earth, which is hard to burn. The glass fiber reinforced plastic pipe is made of glass cloth and resin, and it is inflammable and light in weight.
- Q:Glass fiber reinforced plastic GRE pipe broken hole how to repair and repair?
- Don't let the powder go. It is autumn, the temperature is low, so to put more than summer curing agent, as to the exact proportion, I just guess should be: curing agent, accelerator, resin; 1:1.5:8 with glass fiber wrapped around the pipe, coated on the glass fiber cloth to make glass steel with good quickly, let the glass steel the glass fiber cloth fully soaked, waiting for the full glass steel after curing, and then repeated several layers. It will be strong.
- Q:What kind of material does glass steel ship honeycomb board use?
- The product adopts composite honeycomb structure, prefabricated glass fiber reinforced plastic panel, high strength glass fiber grid cloth and aluminum honeycomb core material, and is compounded by hot pressing. Because of the high strength of the grid cloth, the impact resistance and flexural strength of the composite board are very high.
- Q:What are the standards for FRP pipes?
- To install FRP pipes, first check the radial deflection of the GRP pipe. In accordance with the requirements of the specification, the FRP pipe shall be tested within 24 hours after the completion of the installation to test whether the initial radial deflection of the pipe installed is deformed and whether the pipe has occurred in the case of bulge, flat and other mutations.
- Q:Winding method of glass fibre reinforced plastic pipeline anticorrosive glass fiber cloth
- 1) FRP reinforcement, length of rectangular duct is greater than 900mm, and the pipe length is more than 1250mm, should be strengthened. The reinforcement shall be made of bulk material (fiber reinforced plastic) and reinforced plate at the maximum stress, so as to increase the modulus of the section and increase the overall strength of the tube. FRP reinforcement can also be in the wind pipe production is completed, the treated metal or other corrosion resistant material for reinforcement, reinforcement and FRP as a whole, and with the same pipeline body cementitious material sealing gap2) hobas pipe surface thickness of the slurry to flatten the glass fiber mesh cloth texture is appropriate (see:). No dense air holes and grout leaks are allowed on the wall of the pipe to avoid the stress concentration under the bending tensile stress (positive air pressure) and the bending compressive stress (negative wind pressure).3) FRP pipe and flange corner should transition arc, transition radius to wall thickness of 0.8 ~ 1.2 times, improve the bearing capacity and the cantilever flange to avoid stress concentration. Fiberglass mesh shall be extended to the duct at the flange of the duct.
- Q:What are the materials used in smoke exhaust pipes?
- According to the current national standards: ventilation pipe exhaust pipe material selection of steel pipe (steel), galvanized plate (Bai Tie) smoke pipe, the exhaust pipe exhaust pipe, exhaust pipe, stainless steel pipe, plastic glass smoke exhaust pipe, composite sandwich insulation board, industrial exhaust pipe exhaust exhaust pipe.
- Q:Raw material and mix ratio of inorganic glass fibre reinforced plastic wind pipe
- In order to improve the quality of glass.Advanced technology may be used.The ratio seems to be 1 to 0.001. Pretty much within this range.
- Q:How long is the service life of glass fiber reinforced plastic pipes?
- Hebei, Qingdao and Beijing have additional production bases and service liaison points. Willing to work with new and old customers to create a beautiful today, Chinese and foreign. The company with integrity development guide thought, company value go production, learning and research Jimo road. The wide customers and cooperation of different geographical identity peer praise richly endowed by nature is a unique, Wuhua Tianbao, day people for the auspicious clouds. The sludge produced by the glass fiber reinforced concrete grille has good sedimentation, which is beneficial to the removal of the suspended substance in the back section. The glass fiber reinforced concrete grille has strong adaptability, can adapt to different water quality range, and has strong endurance to the shock load of water quality and water quantity sudden change. FRP grating treatment efficiency is higher than activated sludge process. The galvanized grating plate has the advantages of advanced structural design, optimum matching of gas and water, and sufficient heat exchange, with the same level in foreign countries and superior output. Galvanized grille plate steel bracket adopts zinc plating treatment, double paint anti-corrosion or electrostatic powder spraying, corrosion resistance is strong, service life over similar products double. The two-way grille ensures the natural delamination of the medium and the impurity, and at the same time, the discharge method is arranged at the bottom of the tank, so that the cleaning is particularly convenient
- Q:Is the installation of FRP pipes required qualification?
- At present, for purely glass fiber steel, there is no uniform international standards, installation workers must have qualified installation.
- Q:What is the heat preservation of the plumbing pipe now? I'd like to use fiberglass Seek help from a master
- The simplest economy is the use of rock wool insulation. A little higher cost is polyurethane foam insulation, and the shell is made of PE yellow jacket. FRP insulation effect should not be too good
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
High Pressure GRE Pipe Non toxic of different styles
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 m
- Supply Capability:
- 30000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords