HDPE PIPE GB/T13663-2000 DN110

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Physical properties[edit]

Polyethylene is a thermoplasticpolymer consisting of long hydrocarbon chains. Depending on the crystallinity and molecular weight, a melting point and glass transition may or may not be observable. The temperature at which these occur varies strongly with the type of polyethylene. For common commercial grades of medium- and high-density polyethylene the melting point is typically in the range 120 to 180 °C (248 to 356 °F). The melting point for average, commercial, low-density polyethylene is typically 105 to 115 °C (221 to 239 °F).it is transprant.

Chemical properties[edit]

Most LDPE, MDPE and HDPE grades have excellent chemical resistance, meaning that it is not attacked by strong acids or strong bases. It is also resistant to gentle oxidants and reducing agents. Polyethylene burns slowly with a blue flame having a yellow tip and gives off an odour of paraffin. The material continues burning on removal of the flame source and produces a drip.[3] Crystalline samples do not dissolve at room temperature. Polyethylene (other than cross-linked polyethylene) usually can be dissolved at elevated temperatures in aromatic hydrocarbons such as toluene or xylene, or in chlorinated solvents such as trichloroethane or trichlorobenzene.[4]

GB/T13663-2000:

PE63管材规格
公称
外径dn,mm
SDR33 SDR26 SDR17.6 SDR13.6 SDR11
公称压力 PN,Mpa
0.32 0.4 0.6 0.8 1.0
公称
壁厚
公称
壁厚
公称
壁厚
公称
壁厚
公称
壁厚
16        2.3
20      2.3 2.3
25    2.3 2.3 2.3
32    2.3 2.4 2.9
40  2.3 2.3 3.0 3.7
50  2.3 2.9 3.7 4.6
63 2.3 2.5 3.6 4.7 5.8
75 2.3 2.9 4.3 5.6 6.8
90 2.8 3.5 5.1 6.7 8.2
110 3.4 4.2 6.3 8.1 10.0
125 3.9 4.8 7.1 9.2 11.4
140 4.3 5.4 8.0 10.3 12.7
160 4.9 6.2 9.1 11.8 14.6
180 5.5 6.9 10.2 13.3 16.4
200 6.2 7.7 11.4 14.7 18.2
225 6.9 8.6 12.8 16.6 20.5
250 7.7 9.6 14.2 18.4 22.7
280 8.6 10.7 15.9 20.6 25.4
315 9.7 12.1 17.9 23.2 28.6
355 10.9 13.6 20.1 26.1 32.2
400 12.3 15.3 22.7 29.4 36.3
450 13.8 17.2 25.5 33.1 40.9
500 15.3 19.1 28.3 36.8 45.4
560 17.2 21.4 31.7 41.2 50.8
630 19.3 24.1 35.7 46.3 57.2

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the name of the plastic tube..
You can use either of the following : 1. A syringe. Usually the dentists give you a syringe without a needle. The one that is commonly given out is the monoject syringe that has the tip built into it with a slight curve. That means it is a one piece plastic syringe with the dispensing tip and a plunger. 2. You can also use a WaterPik or Water Jet Hope this helped :)
Q:Connecting fish bowls with a tube?
report me, for not answering what you wanted lol idc
Q:Where can I find plastic tubing?
I dunno...maybe Walmart??
Q:pressure drop through plastic tubing?
I suppose that tubing will be used horizontal at all times during the course of operation with out any fittings. If yes then get pressure at the outlet end by Q (Flow)= Pressure x Area (inner) Find pressure drop from any sourse ( e.g. Ask manufacturer for pressure drop per 1000 foot) Add pressure drop of entire lenght to pressure from formula. Have 20% safety factor added. In case of any fittings used add pressure drop of fittings (from Mfg.) to pressure drop of tubing, if height changes; for every 2.31 feet have a loss of 1 PSI added to original loss of tubing before adding safety factor. Hope it help
Q:How can I rescue a plastic tube flushed down the toilet?
Wet vac! Or else it's gone!
Q:My gerbils are always scratching at their plastic tubes. Why are they doing that and how can I stop them?
Gerbils do this naturally, and there is no way to stop them, aside from removing the tubes. Keep an eye for wear and tear and replace as needed.
Q:I want a clear plastic tube with sealable ends.?
I have found you two suppliers of tubes, the second wall thickness isn't what you want but they are complete containers with caps. The first supplier supplies polycarbonate tubing in lengths and this is a very hard wearing clear plastic that you can cut to size with a normal hacksaw and then try and find end caps, or you can ask an engineering shop to turn six end caps for you and cut a groove in to fit an o-ring seal. The first option will be cheaper. Hard wearing isn't cheap.
Q:Where is the a/c evaporator condensation drain tube on a 1998 Dodge Stratus? What's the best way to clean it
The drain will be on the passenger side, towards the bottom of the firewall. It should be below the 2 heater hoses that go intot he heater core. On yours, I think it was just a tube coming out of the firewall, it will have a foam gasket around the platic tube. The tube will protrude from the firewall just a little bit. Some have a 90 degree rubber elbow on the end of the tube. If it is just the plastic tube, without the elbow, then use either a wet/dry vac if you have one, or use a wire hanger to poke into the hole and try to remove whatever is blocking the drain. If you don't get it out, it might block it again later, or it might come out with the water. If you have the 90 degree rubber elbow, a quick trick is to squeeze it at the very end and roll it between your fingers to loosen the blockage. If that doesn't work, remove the elbow and clean it out, it will generally have the blockage in it. The elbow should have 2 pieces of wire sticking out, just squeeze these together and slide it off. Might have to give it a twist to get it to come loose. If you get the elbow off and water doesn't come rushing out, then clear the plastic tube, and check the elbow to be sure it isn't clogged.
Q:How to change the upper WATER plastic tube, inside the door, Kenmore side by side frige mod 596.57542791.?
Not quite sure which hose that you mean. In between the outer shell and the door liner? Or in the dispenser housing itself. But check these out maybe it will help you out. Good Luck
Q:where can i buy a small piece of latex tubing?
medical supply stores. you are on the right track

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range