GRP Water Tank with Best Quality/ FRP Storage Tanks/ Fiberglass Reinforced Plastic Tank DN2000

Ref Price:
$20.00 - 2,000.00 / set
Loading Port:
China Main Port
Payment Terms:
TT or LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Introduction

In the FRP .with high tensile strength, the fiberglass plays the role of reinforcement whiles the wear-resistance and pressure –resistance synthetic resin is used for bonding the fiber as the basic materials. Putting together, they commonly play the role of being in finished form and load carrier.

 

Feature

The wall structure of the FRP pipe is normally consisting of two parts:

Structure layer: make the continuous glass fiber woven of which is cross winded according to the design angle as the reinforcing frame. Make the synthetic resin as the bonding basic materials. Among them, the weight of fiberglass occupied about 65-70% weight of resin about 30-35%. In order to strengthen the structural stiffness, the resin and silicon sand paste could be added in the middle layer of fiberglass filament winding layer.

 

Specification

u  2.5” Precision injected threads opening available in 8”~16” diameter tanks

u  4” precision injected threads opening available in 18”~36” diameter tanks

u  6” Flange opening available in 42”~80” diameter tanks

u  8”~18” diameter tanks available top opening only

u  21”~80” diameter tanks available top and bottom opening

u  Tripod bases available in sizes of 21”~80” diameter tanks

u  Optional side opening is available

 

Materials  

u  The liner layer is PE (polyethylene) materials for 8”~36” diameter tanks

u  The liner layer is FRP (fiber reinforced plastic) for 42”~80” diameter tanks

 

Working condition

u  Operating pressure: 0.6Mpa (100psi)

u  Bursting Pressure:  1.8Mpa (300psi)

u  Testing pressure:    0.9Mpa (150psi)

u  Working temperature: below 50 centigrade

 

Application 

Pre RO, Ion Exchange, Water softener, water filtration, House hold water filtration, Food and beverage, water storage

 

Opening 

u  2.5”~4” UN threads ABS opening;

u  6” Flange FRP;

u  other customized manway and side flange

 

Advantage

u  Good corrosion resistance

u  High mechanical strength at low specific gravity

u  Good resistance to weathering

u  Light weight

u  Good insulating qualities

u  Provide less maintenance & repairs down time

u  Easy installation

 

FAQ

 

 

1. How long is the delivery time?

For standard water tank less than 100m3, it would be 7-10 days; For non-standard water tank and customized water tank according to client s specific requirements, it would be 15 to 30 days.

 

2. How about the documents after shipment?

After shipment, we ll send all original documents to you by DHL, including Packing List.Commercial Invoice, B/L, and other certificates as required by clients.

 

3.   What's the guarantee, in case the water tank breaks down?

The water tank has one year s guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to client s feedback. Parts will be replaced for free if the problems are caused by quality fault. 

 

 

 

PRODUCTION

 

FACTORY

 

 

 

PACAKGE

GRP Water Tank with Best Quality/ FRP Storage Tanks/ Fiberglass Reinforced Plastic Tank  DN2000

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What's the heat resistance of FRP tanks?
And you choose materials, and some materials are high temperature, and some are at room temperature oh.
Q:The production process of FRP tanks
More than 90% of our FRP products are produced by hand paste. Other methods are pressing, winding, laminating and so on. Japanese hand cream still accounts for 50%. From the point of view of the world, hand paste still accounts for a considerable proportion, indicating that it still has vitality. Hand paste method is characterized by the use of wet resin molding, simple equipment, low cost, once more than 10m paste the whole product. The disadvantages are low mechanization, long production cycle and unstable quality. Our country has introduced extrusion, spraying, winding and other equipment from abroad. With the development of FRP industry, new process methods will continue to emerge.
Q:What should we pay attention to when installing FRP tank for hydrochloric acid?
When the liquid inlet of the hydrochloric acid tank is higher than the bottom of the tank, the inlet shall be bent towards the tank wall so that the liquid enters the tank wall and reduces the impact on the bottom. If the liquid level of the hydrochloric acid tank can not be controlled, the overflow port shall be installed on the hydrochloric acid tank to prevent the spillage of liquid and cause unnecessary harm.
Q:There is a storage tank, which was originally village glue, and now prepared to glue on the basis of the village glass fiber reinforced plastic anti-corrosion, can?
Temporarily can stick glue, but toughness, thermal expansion coefficient difference between the steel and glass too much, a long time will fall off. It's best to remove the glass fiber before removing the glue.
Q:How to determine the quality of FRP?
GRP tank is glass steel tank production process, the use of domestic production convenient, high technical requirements, the entire glass steel tank production process are the most primitive artificial manual techniques, so the production of technical personnel do not need too much, but the glass steel tank product produced is also a lot of disadvantages. In addition to beauty is greatly reduced, the glass steel tank is particularly deadly leakage problem, because in the process of hand lay in the glass steel tank, artificial operation technology is not high it is easy to have a bubble, the bubble will burst and leakage after the aging tank appear large range long time, service life is low, generally 5 around the year.
Q:Carbon steel horizontal diesel oil storage tank is made of glass fiber reinforced plastic. What kind of epoxy resin does the teacher use? Thank you
The whole roll lining PE layer is formed at one time without seams, and the PE layer is firmly bonded with the steel body, without delamination, corrosion resistance and long service life. It is an ideal replacement for enamel, stainless steel, titanium container, aluminum container, plexiglass and plastic welding plate.
Q:What kind of resin is used to make FRP tanks containing nitric acid?
Nitric acid is a strong oxidizing and corrosive strong acid. Chemical formula: HNO3. Melting point: -42 DEG C, boiling point: 78 DEG C, soluble in water, pure nitric acid at room temperature, colorless and transparent.
Q:What are the manufacturing processes of FRP tanks?
The lining has the skeleton and the airtight function, is a part of the finished product. When designing the lining, pay attention to the sufficient strength and rigidity. The thickness of the inner layer is more than 3mm (see Table 1), and the resin content is greater than 80%. The corrosion resistant surface felt, short cut felt and cloth handle paste can be used for making the inner layer. Its production process is roughly as follows: mold making, mold, tank head hand paste glass fiber products, after curing, stripping adhesive, bonding head, air nozzle test, grinding, repairing, too. For the qualified lining lining molding, using two type sealing and simplified one and head connecting two. Thus, it is easier to produce a qualified lining and increase productivity than a three end combination of a sealed tail, a simplified type and a head. The key to making the qualified lining is the connection between the head and the cylinder. The head and the cylinder should be made of socket joint, because the plug joint has the advantages of high strength of joint, good performance of internal pressure, uneasy leakage and convenient assembly. As long as the socket structure is reasonable, it will not leak after use. The bonding joint depends on the resin cement and the outer FRP reinforcement. Wherein, the daub is applied between the socket and the socket and plays the first line of defense. It is made up of resin and filler, and resin has the function of adhesion and seepage prevention. It requires good toughness and higher adhesion, so epoxy resin should be used as daub. After the first line of defense, the seepage prevention mainly depends on the FRP reinforced layer. The layer consists of fiberglass products and resins. Among them, glass fiber products such as blankets and cloth between the fiber gap, can not be impermeable, can only play a strengthening role.
Q:Can FRP withstand 15% of sulfuric acid and nitric acid mixture?
Yes. GRP is not made of steel. It is commonly called glass fiber reinforced plasticFRP (Fiber, Reinforced, Plastics), that is, fiber reinforced plastics, generally refers to the use of glass fiber reinforced unsaturated polyester, epoxy resin and phenolic resin matrix
Q:What kind of material can be used to store the dilute hydrochloric acid containing toluene?
Liquid alkali storage tank commonly used glass steel produced. But also according to different concentrations to determine.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range