Q:Tempered glass and ordinary glass raw materials the same, but the manufacturing method is different, why first heating in rapid cooling, the difference is so great?

Ordinary glass float line cooling is a long process, the glass also has compressive stress, but the compressive stress is small, uneven distribution

Q:Aluminum alloy window glass tape, how fast loading?

The inside mounting method is opposite to the outside installation method, that is, the operator stands on the indoor floor or indoor high stool to install the glass of the aluminum alloy door and window. In the first window in the fixed slot lateral seal, safety glass, positioning, and then fixed to the inside of the notch is injected in the cavity joint sealant fixed, which is dry and wet two kinds of material mixed use practices.

Q:What are the raw materials made of glass and plastics?

Polyethylene (Polyethylene, PE), referred to as PE. is ethylene organic polymer compound. Polyethylene is the best material in contact with food. Non-toxic, tasteless and odorless, conform to the hygiene standards of food packaging. Polyethylene film, transparent, with moisture, oxygen, anti acid and alkali resistance, air tightness in general, excellent heat sealing properties. Known as "plastic flowers" reputation. Plastic packaging and printing volume is the largest and most important materials.PVC-- PVC

Q:What's the price of 0.85mm thick plexiglass, please?

Import plate material is better, about 900, but the price is more expensive, generally do not consider adopting, unless their own customers request, and canAt an accepted price.

Q:Aluminum alloy window material is good, how to assemble?

Glass: used for aluminum alloy doors and windows, ordinary flat glass, it is best to float process produced by flat glass. There are toughened glass, pointed glass, heat reflective glass, etc..Auxiliary material: filling material, glass cushion block, sealing material.Filling material: it is used as the backing material for filling seam. It belongs to R polymer foam, and its shape is generally round, semicircle, oval and triangle. Specifications are lOmm, 30mm and 50mm three kinds of polyethylene foam. The elongation is 50% and tensile strength is between 0.359 and 0.517MPa.

Q:What's good with a cup?

Your DIY mug! Can make their own mug, this is the house of aesthetics has been advocating the bean Home Furnishing DIY home renovation! Don't ask me what paint is on it. Haha!

Q:How do you pack something into (Qian Jin) plexiglass?

The material is called a cold gel. First, some cold gel is injected into the mold, and then put into the specimen or other objects (Photos), then injected with cold gel, sealed, and then polished. Cold gels can be colored as needed. Cold gel products the biggest feature is not parting, what the image of the enclosure.

Q:What kind of material is the glass made of?

The chemical composition of glass is Na2SiO3, CaSiO3, SiO2 or Na2O - CaO - 6SiO2, is the main component of silicate, is an amorphous solid irregular structure. Widely used in buildings for wind and light transmission; of mixtures. There is also colored glass mixed with certain metal oxides or salts, and tempered glass made by physical or chemical methods. Sometimes some transparent plastic (such as polymethyl methacrylate) is also called organic glass.

Q:What materials do we need to make glass septic tanks?

Advantages of glass reinforced septic tanks:Good impermeability:1., high polymer material as the base material, good sealing, never leak.2. construction speed.3. products for factory production of finished products, site construction is fast, and the high water level, rainy season can also be construction.4. clear long cycle.5., the anaerobic fermentation is sufficient, the silt deposition quantity reduces greatly, the clear cutting cycle prolongs 3-4 times, greatly reduces the follow-up operation and the maintenance cost.6., treatment effect is good.7., set aside bins, hierarchical fermentation, sewage discharged in the BOD, COD and other pollutants significantly reduced.8., small footprint.

Q:May I ask what specific aspects of German foam glass and foam glass made in China are?

The domestic production line (excluding the line), you can imagine the bread, a fixed container, the raw material grinding and mixing placed in the container, into the furnace after foaming, molding and demoulding, manual cutting required size (note here will produce a large number of loss; 100%) not using waste glass.