Full Polished Glazed Porcelain Tile 600 YD6A266
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1180.8
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Full Polished Glazed Porcelain Tile 600 YD6A266 is one of the most popular color of Polished Glazed Porcelain Tile Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Glazed Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
4. Is it easy to clean?
—— Yes. Quite Easy to clean.
5. Any feature of the tiles?
_____The polished porcelain tile is widely used for interior houseflooring, hotel lobby flooring, shopping mall as well as other public sites.
- Q: I‘m gutting my bathroom and will be tiling the floor and then adding a new vanity and a new toilet.The question is, do you tile before you put in the toilet and new vanity or do you put in these items first and then tile around them? Concrete slab foundation that I‘m currently working on leveling.
- You want to tile first, tile last forever. You may want to change your vanity eventually, or you may want a different type of toilet in the future. If you have your tile down first, these changes will not matter. Also, tile doesn't ruin if you have a leak and water damage. If you tile first, you just pick out new things. If you put in the stuff first, you will have to buy exactly the same thing.
- Q: We are looking to buy a house and we‘re choosing between tile and hardwood floor. I prefer hardwood because I feel its easier to clean and more comfortable. Husband prefers the tile. Is it just personal preference or is one better than another, cleaning wise.
- I would go with the hardwood floor. As the styles change and you redecorate your house, the wood will match anything you do to the house whereas the tile may not. If a tile cracked and the ones in your house are not sold, you will have to replace the entire floor otherwise you will have a patch that doesn't match in the floor. Also, tile has to be regrouted more than the hardwood would need to be refinished. If you decided down the road that you wanted to go with tile, you could remove the hardwood much easier than tile. Hardwood is just a classic type of flooring and if it gets cold, you can just throw some floor rugs here and there (which would be a good idea in high traffic areas any) and it is as cozy as ever.
- Q: I am doing my bathroom slate and i need a bullnose tile. I special ordered it at Home Depot and now they are telling me it is discontinued. I was wondering if anyone new of a web site or store that i could order this from because my bathroom is supposed to be started Monday and Now i dont have the bull nose... please help??
- I okorder /... This is a link in my gneral search. Perhaps you can find something suitable. Steven Wolf Just my two sense
- Q: How is the acceptance of tiles after construction?
- Acceptance of several main parts: first within two meters of the error shall not be greater than 2mm, the joints should be neat, uniform size, no hollowing, not loose, with two meters long ruler or by the foot of acceptance. Second, you can use a small hammer in the ground or the walls of all the light tapping, no empty drums. Finally, pay attention to the drainage requirements of the floor tile slope should meet the drainage requirements, and ground leakage should be tightly integrated.
- Q: how can i tile over linolium flooring without pulling it up?
- Tap around the floor in a tight pattern. Loose spots will sound hollow. Cut them out completely with a sharp utility knife, angleing the knife away from the center of the spot you are cutting. Spred a floor prep, such as Ardex or Planipatch ( both portland cement based floor preps), over the floor to fill the holes and any pattern (you will need an 18 flat trowel). Spread the mix on the floor at a 45 degree angle. Scrape off the excess at a 60 to 70 degree angle. Work in a semicircle sweeping motion, leaving only what you need to fill the holes and pattern. The prep will get lighter as it dries, usually 20 - 45 miniutes depending on the size of the cutouts. All prep shrinks as it dries, so you may need to coat larger cutouts a second time. Scrape down any ridges with the edge of the trowell, use a low 5 to 10 degree angle to avoid gouging floor. Sweep floor thoroughly, at least twice, and vaccuum up pile. Then you are ready to set tile. Be sure to use the right notch size on the trowel for proper adhesion without squeez out mess. Also read the glue directions. Many glues need open time to tack up before setting tile. Doing this will make sure that you are getting the best adhesion possible. It will help to resist water damage, and it will keep the pattern of the vinyl from telescoping through the tile over long peroids of time.
- Q: I have tiles around all of my kitchen and would like to cover them. Can I skim plaster over them because it would take weeks to remove them? Is there any other way round avoiding removing them? Any ideas welcome. They are driving me up the wall, literally! HELP.
- Hi Neil There is tile paint on the market if it is only the colour you donot like. It maybe possible to fix plaster board over them and then plaster but check with a builder. Sarah Cox
- Q: i am getting my kitchen done over in 2 weeks cost is not a factor i cant decide to do tiles or harwood flooring which is better for the kitchen. i have two kids 2 and 5
- Well First Off I'm Assuming The Kitchens Downstairs And You Sitting On A Concrete Sub Floor. If So You'll Need To Buy Engineered Wood (Wood Sitting Upon Cross Layered Plywood For Stability) Rather Than A Solid So It Can Be Glued Down And Actually Stay Down. Also You Would Need A Moisture Barrier Which Keeps Water Down Away From Your Wood Floor; Some People Don't Know That When It Rains The Water Soaks Into The Yard And Rises Under Your House Right Through The Concrete Sub Floor Which Can Be Deadly For Wood Flooring IE Warping And Sinking. Resistance Wise You Need To Look At The Janka Scale Which Is A Wood Hardness Scale Higher The Number The Harder IE Better. The More Polyurethane Aluminum Oxide Mix (All Finished Wood Has It) They Glaze Over Wood Will Make It That Much More Durable To Dents And Dings Not Scratches All You Need Is A Rock On Your Shoe To Scratch Wood;(Wood Is Harder To Replace Dented Pieces) So That Should Make You Think Of Color Medium Tone Woods Don't Show Scratches As Much As Dark And Light Woods Do. Also Wood Has Corers Mitered, Angled They Can Collect Dust In Them So I Recommend Buying Square Cut So They Are Flush Together So No Room For Dust. ----------- Porcelain Tile Is Cooked At A Higher Temp Cooking Out More Air In The Tile Making It A All Around More Durable And Practical Product Easier To Clean And Maintain You Can Seal The Grout To Keep It Clean And Buy A Hover Floor Mate I Love Mine It Vacuums And Scrubs It Clean With Any Kind Of Liquid Floor Cleaners And Dries It Also. They Also Have A Rating System Called PEI It Is Rated From 1-5 And Is Rated On Usability Where It Can Be Used 1 Is Wall Tile And 5 Is Commercial Use. You Will Have More Color Choices When It Comes To Tile To Match Cabinets And So On. Tile IS Also Easier To Replace If Broken They Chip It Out And Slide In A New One. ----- So After All That I Like Both Which Works For You.
- Q: Hexagonal tiles of side 20cm are used to tile a room that measures 6.25m by 4.85m. Assuming we complete edges by cutting up tiles how many tiles are needed?
- A general rule of thumb is to order 10% more tile than your normal square footage to allow for such cuts, etc.
- Q: I am purchasing a home and need to change the flooring before moving in. It is a 1500 sq foot house including garage, laundry room etc. I have already picked out carpet for the 3 bedrooms but am trying to decide on laminate wood floors or tile? It would be in the rest of the house including hallway, living room, and kitchen. I have heard tile floors are great, yet hard to clean, and hurt people‘s legs. I haven‘t heard too much about the laminate floors.Any opinions, suggestions, stories?? I would really appreciate it!
- Go with tile. You add value to your house. Cheap laminate would only last only a few years. Laminate, in essence, is comppressed paper. If you have kids and they spill water, it could easily damage the laminate flooring. Expensive laminate could prevent this.. however they cost like $3+ per sq/ft. At that rate you might as well get the real deal and go with hardwood flooring. Last longer. Upkeep better. I'm a contractor btw.
- Q: How are these tiles differ from each other and how to identify these?
- Porcelain okorder /
Send your message to us
Full Polished Glazed Porcelain Tile 600 YD6A266
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1180.8
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
