FRP Tanks for Water Treatment/FRP Soft Water Tank /Fiber Glass Reinforced Plastic Vessels for Water Treatment DN10000

Ref Price:
$20.00 - 2,000.00 / set
Loading Port:
China Main Port
Payment Terms:
TT or LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Introduction

In the FRP .with high tensile strength, the fiberglass plays the role of reinforcement whiles the wear-resistance and pressure –resistance synthetic resin is used for bonding the fiber as the basic materials. Putting together, they commonly play the role of being in finished form and load carrier.

 

Feature

The wall structure of the FRP pipe is normally consisting of two parts:

Structure layer: make the continuous glass fiber woven of which is cross winded according to the design angle as the reinforcing frame. Make the synthetic resin as the bonding basic materials. Among them, the weight of fiberglass occupied about 65-70% weight of resin about 30-35%. In order to strengthen the structural stiffness, the resin and silicon sand paste could be added in the middle layer of fiberglass filament winding layer.

 

Specification

u  2.5” Precision injected threads opening available in 8”~16” diameter tanks

u  4” precision injected threads opening available in 18”~36” diameter tanks

u  6” Flange opening available in 42”~80” diameter tanks

u  8”~18” diameter tanks available top opening only

u  21”~80” diameter tanks available top and bottom opening

u  Tripod bases available in sizes of 21”~80” diameter tanks

u  Optional side opening is available

 

Materials  

u  The liner layer is PE (polyethylene) materials for 8”~36” diameter tanks

u  The liner layer is FRP (fiber reinforced plastic) for 42”~80” diameter tanks

 

Working condition

u  Operating pressure: 0.6Mpa (100psi)

u  Bursting Pressure:  1.8Mpa (300psi)

u  Testing pressure:    0.9Mpa (150psi)

u  Working temperature: below 50 centigrade

 

Application 

Pre RO, Ion Exchange, Water softener, water filtration, House hold water filtration, Food and beverage, water storage

 

Opening 

u  2.5”~4” UN threads ABS opening;

u  6” Flange FRP;

u  other customized manway and side flange

 

Advantage

u  Good corrosion resistance

u  High mechanical strength at low specific gravity

u  Good resistance to weathering

u  Light weight

u  Good insulating qualities

u  Provide less maintenance & repairs down time

u  Easy installation

 

FAQ

 

1.      What's the guarantee, in case the water tank breaks down?

The water tank has one year s guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to client s feedback. Parts will be replaced for free if the problems are caused by quality fault. 

 

2. Do You Arrange Shipment For The Machines? 

Yes, dear esteemed customers, for FOB or CIF price, we will arrange shipment for you. For EXW price, clients need to arrange shipment by themselves or their agents. 

 

PRODUCTION

 

FACTORY

 

 

 

PACAKGE

 FRP Tanks for Water Treatment/FRP Soft Water Tank /Fiber Glass Reinforced Plastic Vessels for Water Treatment DN10000

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Physical properties of FRP tanks
Light high-strengthThe relative density is between 1.5~2.0 and only 1/4~1/5 of carbon steel, but the tensile strength is close to or even higher than that of carbon steel, while the specific strength can be compared with that of advanced alloy steel. As a result, aviation, rockets, aerospace vehicles, high pressure vessels, and other applications that need to reduce weight have excellent results. The tensile, flexural and compressive strengths of some epoxy FRP can reach over 400Mpa.
Q:What type of resin is used in FRP tanks for electroplating waste water?
Glass fiber is made from glass, and the main component of glass fiber is silica. The glass fiber is the molten glass into uniform quality 0.5-30 microns in diameter of the filaments, with no burning, corrosion resistance, high tensile strength, good optical performance, low price and easy to get raw material, so it is excellent reinforcing material.
Q:What should we pay attention to when installing FRP tank for hydrochloric acid?
When the liquid inlet of the hydrochloric acid tank is higher than the bottom of the tank, the inlet shall be bent towards the tank wall so that the liquid enters the tank wall and reduces the impact on the bottom. If the liquid level of the hydrochloric acid tank can not be controlled, the overflow port shall be installed on the hydrochloric acid tank to prevent the spillage of liquid and cause unnecessary harm.
Q:What is the wall thickness of FRP vertical tanks?
The design of a unit should be different from that of a unit, and each has its own design
Q:Why should the hydrochloric acid storage tank be lined?
Hydrochloric acid tank generally adopts glass steel material, can be produced on site (is the storage of recognition of the good of material), glass steel, fiber cloth, polyester cloth and epoxy resin and vinyl resin and winding.
Q:To make a high quality FRP tank, is the hardware construction important to the quality?
Rolling drum lining non die connection has a relationship with the skilled workers, pull type extrusion will lead to damage the lining during demoulding, this is the day after the user is found can produce sweating phenomenon, is due to this reason, glass steel tank industry has a mature industrial zone in Henan Hebei, the south is not much, there are few large enterprises, relatively Guangzhou Weibo FRP existing may be the one on behalf of the industry.
Q:My unit recently needs 3 large tanks for hydrochloric acid. The tank, which was made of fiberglass before, is of poor quality and cannot be used for three years
In fact, besides this I know such as PP or PE type tank or rubber lined all material can be done from the hydrochloric acid storage tank, but if the price or the strength and service life is far less than the glass steel tank, because the high corrosion resistance of FRP strength. These characteristics are not other materials instead of the.
Q:Glass fiber (resin) storage tank for hydrochloric acid, how many years of service, please list the basis, thank you!
This is a professional although I do have to ask this but according to experts and geographical conditions the hydrochloric acid storage tank as short as 1 older two years is certainly a problem but are small problems such as what Water Leakage care 5-8 years should be no problem if you want to buy what you can ask the tank manufacturers such as purchasing
Q:What are the features of FRP tanks?
The glass reinforced plastic septic tank is a kind of glass fibre reinforced plastic storage tank made of glass fiber or its products as reinforcing material (glass fiber reinforced plastic or glass fiber reinforced plastic). It is a new type of environmental friendly septic tank.
Q:What kind of material can be used to store the dilute hydrochloric acid containing toluene?
What kind of material can be used to store the dilute hydrochloric acid containing toluene?

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range