Different Colors Fiberglass Mesh for Wall Construction
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m²
- Supply Capability:
- 500000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Fiberglass Mesh
Fiberglass mesh is mainly alkali-resistant fiberglass fabric, it use the C /E-glass fiber yarn (main ingredient is a silicate, good chemical stability) through a special weaving technique, then by the anti-alkali and reinforcing agent etc high temperature heat finishing treatments. It's an ideal engineering material in construction and decoration industry.
Specification Fiberglass Mesh
Mesh size:
10mm x 10mm,5mm x 5mm, 4mm x 4mm, 4mm x 5mm, 2.5mm x 2.5mm, and so on.
Weight/m2: 45g-300g
Length/roll: 50m-100m
Width: 100-2000mm
Color: white, blue, orange or other colors
Special spec can be ordered and produced by the requirements of customers
Product Show
Usage/Applications of Fiberglass Mesh
1. Wall reinforced material (such as fiberglass wall mesh, GRC wall panels, EPS insulation with the wall board, gypsum board, bitumen etc)
2. Reinforced cement products.
3. Used for Granite, mosaic, marble back mesh etc.
4. Fabric waterproof membrane, asphalt roofing.
5. Framework material for einforced plastics, rubber products,.
6. Fire board.
7. Grinding wheel base fabric.
8. Road surface with geogrid.
9. Construction caulking tape etc.
Packaging & Delivery of Fiberglass Mesh
Packaging: Each roll is shrink-wrapped, or to be packed in plastic bag. Then rolls are put into pallets and cartons.
Delivery: About 25-30 days after confirming the order.
Characteristics of Fiberglass Mesh
1. Good chemical stability: Alkali-resistant, acid-resistant, waterproof, cement erosion-resistant, and other chemicals' corrosion resistant; and strong resin bonding, soluble in styrene.
2. Outstanding craftsmanship include coating enough alkali-resist glue, our coating glue is produced by Germany BASF which can keep 60-80% strength after test in Naoh 28days later, so that guarantee high strength, high tensility, light weight.
3. Our fiberglass yarn is supplied by Jushi Group which is the largest producer of fiberglass yarn in the world like Saint Gobain, it's 20% extra strong strength and beauty surface than normal fiberglass yarn.
4. Strength retention rate> 90%, elongation<1%, the durability of more than 50 years.
5. Good dimensional stability, stiffness, smoothness an difficult to shrink and deformation, good positioning property.
6. Good impact resistance and not easy to be teared.
REALLY, owns production lines of fiberglass spinning, weaving and insulation material, and composites, and a R&D and quality test center of fiberglass. In the business philosophy of “Customers are always the most important and we will serve them and develop the market with high quality products” and tenet of “Customer Satisfaction”, the company wishes to cooperate with national and international customers for a brilliant future in fiberglass industry.
- Q:How do you paste the mesh cloth on the back of the stone?
- At the bottom of the stone board, besmear the resin glue, and then adhere to the fiber mesh cloth, forming tensile waterproof layer, but must not forget to brush in the side.
- Q:The difference between alkali resistant mesh fabric emulsion and urine glue 7.5
- The mesh fabric is soft and positioned, and also folded, both of which are the common products of the exterior wall insulation.For positioning glass fiber mesh cloth glue, we do not know is not the use of adhesive to fix, in fact, glass fiber mesh cloth itself with a certain amount of binder, binder general alkali resistant glass fiber mesh is used in milkLiquid coating stereotypes, and no alkaline, usually use urine gum for coating treatment, stereotypes are almost the same effect,The effect of the coating is only too hard, so it is brittle, and sometimes it breaks easily.
- Q:Can fiberglass mesh waste be recycled? What can you do if you can?
- Mesh cloth, such as discarded cloth, is not corrosive and may not corrode for hundreds of years, causing serious pollution to the land;
- Q:What is the use of alkali resistant fiberglass mesh cloth on the exterior wall?
- The use of composite plaster mortar of alkali resistant glass fiber cloth, on the one hand, can effectively increase the tensile strength of the protective layer, on the other hand, can effectively disperse stress, can be originally may have wider cracks spread into many smaller cracks, thus forming the crack in. The surface coating material and the amount of coating have important significance to the alkali resistance of glass fiber mesh cloth, and the glass fiber variety has a decisive significance for long-term alkali resistance. In the process of using glass fiber mesh: mesh between lap width not less than 50mm, the negative corner mesh to pressure stubble lap, its width is larger than 50mm, yang angle is greater than or equal to 200mm. In the construction, mesh paving should be smooth, no wrinkles, mortar plumpness reached 100%, at the same time to find and maintain smooth, straight corner square and the verticality of yin and yang.
- Q:Do external insulation with alkali resistant fiberglass mesh cloth, why should the first layer be double or thickened?
- Because the first floor of human activities may be exposed to the outer wall, easy to destroy the exterior insulation system
- Q:How to fill the sample size of glass fiber mesh cloth, fill what general specifications
- Glass fiber mesh fabric is based on glass fiber woven fabric as its base material and is coated with high polymer emulsion.
- Q:What's the price of fiberglass mesh?
- Alkali resistant glass fiber mesh cloth price range is large, with "Jining wellav" WL-0812 series of products, price fluctuations in the price range of $0.32--5
- Q:Self-adhesive fiberglass mesh
- Self adhesive mesh and EPS mesh than the general viscous grid has the characteristics and general mesh fabric. But than the general mesh more viscous soft, moderate viscosity, uniform coating, adhesive does not appear in some places, some places less adhesive at the time of construction, to avoid the "bulge" phenomenon.
- Q:Glass fiber mesh fabric stereotypes poor, general use of glue is acrylic emulsion, please add what accessories, you can finalize a better shape
- Acrylic emulsion less water, that is, high cost. It's cheap and good
- Q:What kind of wall fabric is covered with fiberglass mesh? Do you apply the powder or the powder? Thank you
- And the wallFully paved, just an industry standard, the requirements are yes, but rare, there are really such a use, on the one hand is the cost, on the one hand is now mostly cast-in-place, there is no need!
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Different Colors Fiberglass Mesh for Wall Construction
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m²
- Supply Capability:
- 500000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords