Concrete Pump Truck ZLJ5331THB42
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 unit
- Supply Capability:
- 100 Unit Per Month unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Model |
ZLJ5331THB42 | |
Pumping system |
Max. theo. outputm3/h |
120 |
Max. output pressure of the concrete Mpa |
6.5 | |
Rated working pressureMpa |
32 | |
min-1 Pumping frequency |
22 | |
Hopper capacityL |
550 | |
Feeding heightmm |
1540 | |
Mode of the hydraulic system |
Closed/open | |
Mode of the distribution valve |
S valve | |
Cylinder diameter×strokemm |
130×2100 | |
Cylinder diameter×strokemm |
230×2100 | |
Cooling of the hydraulic oil |
Air-cooled | |
Recommended collapsed slumpcm |
12~23 | |
Max. dimension of the aggregatesmm |
40 | |
booms |
Max. pumping heightm |
41.6 |
Max. pumping radiusm |
37.6 | |
Max. pumping depthm |
29.5 | |
Slewing angle |
365° | |
Number of the booms section |
5 | |
Length of each boommm |
8150/7220/7270/7480/7480 | |
Angle of unfolding the booms |
90°/180°/180°/240°/235° | |
Diameter of the delivery pipemm |
125 | |
Length of the end hosemm |
3000 | |
Chassis and whole vehicle |
Chassis model |
Actros 3341 |
Drive mode |
6×4 | |
wheelbasemm |
4500+1350 | |
Wheel gauge (front/rear)mm |
2034/1804 | |
Modle of the tyre |
315/80R22.5 | |
Modle of the engine |
OM501LA.Ⅲ/17 | |
Max. power of the enginekW/(r/min) |
300/1800 | |
Max. torque of the engineN.m/(r/min) |
2000/1080 | |
Displacement of the enginecc |
11946 | |
Type of the fuel |
Diesel | |
Capacity of the fuel tank L |
400 | |
Standard of the exhaust emission |
EUROⅢ | |
Max. speed of the whole vehiclekm/h |
85 | |
Mass of the whole vehiclekg |
32700 | |
Overall dimension of the whole vehicle (length×width×height)mm |
11720×2500×4000 | |
others |
Type of lubrication |
Auto lubrication of energy-saving type |
Capacity of the hydraulic oil tank L |
650 | |
Type of control |
manual+ remote control | |
Max. pressure of the water tankMpa |
4 | |
Capacity of the water tankL |
450 | |
Mode of cleaning the concrete pipes |
Water washing/dry cleaning |
- Q: What are the small concrete mixers
- The concrete mixer is divided into a falling mixer and a strong mixer The JZC series: JZC250.350.500 single-sleeper shaft machine mixer: JDC series: the JDC350.500 double sleeper shaft force mixer: JS series: JS500.750.1000.1500.2000.3000.4000
- Q: A concrete mixer can last for years
- Are now commonly commercial concrete mixing plant mixing unit, use fixed number of year of the requirements, without proclaimed in writing if repair, maintenance and so on is good, can satisfy the production requirement, fixed number of year can reach more than 10 years.
- Q: What is the difference between a concrete mixer and a mortar mixer
- The mortar mixer should be smaller! No different
- Q: How is the concrete mixer cleaned
- The concrete mixer should pay attention to the following matters: 1, concrete mixer cleaning considerations: Maintain and maintain the maintenance procedure, such as cleaning, lubrication and oil. 2 concrete mixers cleaning attention item two: Concrete mixer start to check all controllers are in good condition, before the shutdown after water and rocks into the mixing barrel within 10 ~ 15 minutes for cleaning, water and Shi Ziqing out again. When the operator is required to go inside the mixer, remove the power supply and remove the fuse and lock the switch box. 3 concrete mixer cleaning considerations: It is forbidden to use sledgehammer to remove concrete from the concrete bowl and only use chisels to remove it. 4, the concrete mixer cleaning attention item 4: After working in the cold season, water cleaning mixer drum and put water accumulation in the water pump, water tank, pipe net, in order to avoid water pump, water tank, pipe freezing, etc.
- Q: Common type of concrete mixer
- Self-falling concrete mixer The mixer is placed in a vertical mixing principle. As the mixing cylinder turns, the concrete mixer is used to make the free drop in the barrel and stir. Self-falling concrete mixer is used for mixing plastic concrete and low liquid concrete. The body and blade wear less and are easy to clean, but the power consumption is large and the efficiency is low. It is usually 90-120s. This kind of mixer has a lot of wear and tear on concrete aggregate, which affects the quality of concrete. Strong concrete mixer It contains a number of leaves in the mixing bowl, whisk the blade around the vertical axis or the horizontal axis, and force the material to stir until it is well stirred. The concrete mixer mixing effect. Suitable for mixing dry concrete and lightweight aggregate concrete, and also can stir and low liquidity concrete, mixing quality, fast mixing, the advantages of easy operation and safety. But the machine is worn badly. It is necessary to use high strength alloy steel or other wear-resisting material to make lining, which is used to concentrate the mixing station or the prefabrication plant.
- Q: The safe distance of the concrete mixer
- 1. The correct use of 1) to ensure the mixing quality of the mixture, it must be the gravel, sand and cement to be accurate. Before stirring, adjust the position of the pointer on the water tank indicator to control the amount of water. The mixing time should be strictly controlled, and the hopper discharge should be clean, otherwise it will affect the mix of the next mixture. 2) when loading in the feed hopper, should pay attention to the loading sequence, namely the rubble next, cement, sand, in the hopper rises so does not cause cement float in the sky. When the work is finished, pour some gravel or sand into the mixing drum, stirring up 10min. Otherwise, it will be difficult to clear after the rest of the drum solidifies.
- Q: Operation procedure of concrete mixer
- Before stirring, the car should be run in an empty car. Adjust the timing of the relay according to the stirring time. Water moistening the mixing bowl and the blade and the ground. The process, such as electrical or mechanical fault, should be discharged from the part of the mixing material, lighten the load, remove the fault and then drive again. When operating, the operation should be checked regularly to prevent safety accidents such as electrocution and mechanical injury. Finish the experiment, turn off the power supply, clean the mixing drum and the ground and clean up the cleaning.
- Q: How does a concrete mixer operate
- Before the concrete mixer starts, check the controllers for good. 2, the concrete mixer must clean the inside when used, especially in the winter, no foreign material in the front roller should be used, thus extending the service life. The concrete mixer should be placed in a firm place, and shall be secured with the support of the scaffold or the support of the shaft, and shall not be supported by the tyre. When the concrete mixer is in operation, it is strictly forbidden to put the tools in the roller, and pay more attention to safety. 5, concrete mixer in the feed hopper rises, for the sake of safety, personnel are strictly prohibited by or stay under the hopper, after the completion of the work of the mixer hopper fixed; When the concrete mixer is on site, it should be fixed in the mixer, cut off the power supply, and get into the mixer cylinder In custody
- Q: The difference between concrete mixer and concrete mixer
- Concrete mixing plant is including weighing, feeding and a series of complete system of equipment, and concrete mixer is a mechanical stirring mixer belongs to a kind of mixing equipment. The mixing machine in the mixing station is a strong mixer in the concrete mixer, so it is fair to say that the mixer is a member of the whole equipment of the mixing station. No matter which of the two devices during start-up operation, safe operation, must pay attention to the hopper should ensure reliable braking at any position, hopper should not fall; The movement of the upper and lower limit devices should be sensitive and reliable. The safety cover of the open gear and belt should be complete and intact, and the safety pins and safety pins of the hopper safety hook and track should be in good condition and complete. The leakage protector parameter should match, the installation should be correct, the action should be sensitive and reliable. Belong to the mixing machine, concrete mixer and concrete mixing station their application field the same, only choose the appropriate mixing plant equipment according to user's demand
- Q: Can you stir the mortar in a concrete mixer?
- Sure! Concrete mixer is a two-bedroom shaft mixer, which combines mechanical, hydraulic and electrical. The machine adopts gear transmission and automatic feed system, the speed is fast, the mix is average, easy operation, the defect rate is low, the service life is long. Are suitable for all kinds of medium and small precast file and water conservancy, Bridges, roads, ports, docks, industrial and civil building engineering stirring harsh concrete, plastic concrete, active concrete and lightweight aggregate concrete and mortar. This series of mixer mixing proportion of concrete, mortar, mortar, suitable for all kinds of medium and small construction project, is the ideal concrete mixing equipment by the user.
Send your message to us
Concrete Pump Truck ZLJ5331THB42
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 unit
- Supply Capability:
- 100 Unit Per Month unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords