COKE Breeze of 0 to 5mm
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Structure of Metallurgical Coke of COKE Breeze of 0 to 5mm Description：
Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.
Coke in the volatile: on the basis of judging the volatile content of coke coke maturity.Such as volatile matter is more than 1.5%, green said coke;Volatile is less than 0.5-0.7%, say, generally mature metallurgical coke volatilizes into 1%.
The moisture in coke: moisture fluctuations can make coke measurement, which cause the furnace condition fluctuation.In addition, coke moisture increase will make M40 on the high side, low M10, bring error to drum index.
2. Main Features of the Metallurgical Coke of COKE Breeze of 0 to 5mm：
• Quality assurance
• Mutual benefit
• Preferential price
• Various choice
3. Metallurgical Coke of COKE Breeze of 0 to 5mm Images:
4. Metallurgical Coke of COKE Breeze of 0 to 5mm Specification:
Parameters | Guarantee | Rejection |
Total Moisture (As received basis) | 5% max | |
Ash (dry basis) | 12.5% max | > 13.5% |
Volatile Matter (dry basis) | 1.5% max | > 1.8% |
Sulphur (dry basis) | 0.65% max | > 0.75% |
Phosphorus (dry basis) | 0.035% max | > 0.045% |
M10 | 7% max | > 9% |
M40 | 84% min | ＜82% |
CSR | 65% min | ＜63% |
CRI | 25% max | > 27% |
Size 30-90 mm | 90% min | |
+90 mm | 5% max | > 8% |
-30mm | 5% max | > 8% |
5. FAQ
Metallurgical coke is blast furnace coke, coke, iron alloy and nonferrous metal smelting with coke.As more than 90% of the metallurgical coke for blast furnace ironmaking, so often called the blast furnace coke metallurgical coke.China's metallurgical coke quality standard (GB/T1996-94) is the quality standard of blast furnace.
- Q: What are the companies that produce coke
- Very much, what kind of coke do you want, our company would like to buy coke particles
- Q: What are the main uses of coke
- A small smelting industry, used to produce calcium carbide, carbon disulfide, phosphorus etc.. In the iron and steel enterprises, coke powder is also used as sintering fuel. Coke can also be used as raw material for the preparation of raw materials for the synthesis of water gas. ??4, in order to make the blast furnace operation to achieve better technical and economic indicators, smelting coke (metallurgical coke) must have the appropriate chemical and physical properties, including the smelting process of thermal properties.
- Q: Coke is divided into several kinds of specifications ah
- Three: 1 2 3 coke metallurgical coke of high sulfur cokeCoke is in coal under the condition of air isolation, heating to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, curing and contraction of the final stage is made, the process is called high temperature coking (high temperature carbonization). Coke obtained from high temperature coking for blast furnace smelting, casting and gasification. Coke oven gas produced in the process of coking and recovery is not only a high calorific value of fuel, but also an important industrial raw material for organic synthesis. Coke is mainly used in blast furnace ironmaking and smelting of non-ferrous metals such as copper, lead, zinc, titanium, antimony, mercury and so on.
- Q: Effect of coal fineness on coke
- In coking, the caking property is not good and the coke quality is reduced. Therefore, from the perspective of the uniformity of coal, coal fineness of some good. From the operation point of view, the greater the fineness of coal coal bulk density is lower, the production capacity of coke oven is low, into the coke oven, fine coal powder easily by gas is brought out, and easy blockage of ascending pipe, gas collector, affect the normal production of the coke oven, and the set of tar in the trachea increased, the effect of recovery operation. Therefore, from the production point of view, the fineness of coal should not be too large. Bulk coal in the top of the coke oven, coal crushing fineness of the general control in less than 3mm component in the range of 73~83%. Tamping coking, generally about 90%. In this range, the fineness of pulverized coal can meet the requirements of coke quality and coke oven operation. The small coal crushing will reduce the adhesion and the bulk density of coal, so as to reduce the coke quality.
- Q: How coal is turned into coke in the coking chamber
- The kiln chamber wall set to continue burning, and some heat incoming kiln (indirect heating). High temperature gas flow (800 DEG C, is mixed with coal pyrolysis, chemical products into the fabric of unburned.
- Q: Some experimental results summarized the following two facts: the coke can not be used to restore aluminum mine, but it can be used for the reduction of copper and iron; no containing copper sulfate solution with tin, thus the activity sequence C, Al, Cu, Fe of the four elements is ______.
- Coke can not be used to restore aluminum ore, but can be used to restore copper and iron ore, indicating that aluminum is the most active
- Q: What are the requirements for coke and other accounts?
- Coke futures margin is about 10% or so is quoted at $1169 per ton, trading units of 100 tons per hand, so do a coke about $11690.
- Q: Can the sulfur content of coke affect the casting process of nodular cast iron at 0.65?
- If the control is not good, the manganese content in the molten iron can be increased by increasing the reagent
- Q: 8 points will be isolated from the air to enhance the heat of coal, in addition to the main coke, but also the material listed in the following table: No.
- Ethylene containing carbon carbon double bonds can react with bromine and bromine, and reaction of bleaching, b.:
- Q: Why in the blast furnace ironmaking with coke instead of charcoal why coke can produce heat to improve the heat of the furnace how to produceWhy in the blast furnace ironmaking with coke instead of charcoal why coke can produce heat to improve the heat of the furnace how to produce
- The reaction of the blast furnace ironmaking is the reduction reaction: the coke produces CO in the furnace, the CO reduces the iron oxide, and the part of CO burns, and the whole process will release a lot of heatCheck information, combined with the knowledge of the professional knowledge, for reference purposes only!
Send your message to us
COKE Breeze of 0 to 5mm
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
