Q:What is the difference between a dome camera, a gun camera and a dome camera in security monitoring?

Mainly the use of the difference, the dome camera is generally used for indoor ceiling place, because it is relatively small, so more beautiful. Gun camera is generally installed in the channel, plant or parking area and other areas. The advantage is that you can install long focal length lens to expand the scope of monitoring, the disadvantage is more obvious.

Q:What is the meaning of the camera uid?

You can click on the search, the phone will automatically display the LAN camera uid.

Q:What is the monitor for the video recorder?

The screen divider outputs the full-screen pictures input by the cameras in sequential and intermittent intervals on the monitor and can be recorded in the order and time interval described above. The interval is generally adjustable. It has the functions of sequential switching, picture-in-picture, multi-picture output display playback image, interconnected camera alarm display, touch-time pause screen, alarm recording playback, time, date and title display.

Q:What is the difference between monitoring the camera and the usual?

3. Camera effect: monitoring with the camera, generally require high clarity, because the current computer camera commonly used sensor chip is Micron or modern photographic chip, these two kinds of chip camera, clarity are similar, if the use of 5 glass Lens, then the requirements are less stringent occasions are generally able to meet the basic requirements, and 30 frames per second speed is basically able to meet the monitoring needs. If you need better clarity, you can use the physical dynamic 1.3 million camera (not online nonsense 1.3 million, need to emphasize that the sensor chip and interface chip support physical dynamic 1.3 million camera, can really be considered 1.3 million ), This camera is generally better imaging results than the use of magnesium light and modern sensor chip camera, can get better than the average physical 350,000 camera effect, but the bandwidth occupied and CPU occupancy rate is very high. So easy to monitor the camera system easy to use.

Q:I said is the monitoring of the camera, not what home with the camera, you can monitor the leader can also record the software, or hardware did not?

Of course, just add a pickup on the line.

Q:Zhongwei HD monitoring system IP address is not how to do

Click on the problem of the screen, right - remote management - network management, the IP address can be changed to other IP (such as 192.168.1.172, etc.), change the device management interface, a key to set IP, so there will be no IP conflict Causing the camera can not use the problem.

Q:Monitor the camera why the black screen?

Second, check the next line is a problem, if the line is no problem, it may be a camera is broken, you can use the replacement method for testing, with a good camera to replace the test, if there is an image that the camera is bad The

Q:Remote monitoring principle

Network communication using TCP / IP and network multicast (Multicast) technology, to maximize the use of the network transmission performance and network bandwidth, to avoid network congestion.

Q:Monitor the camera infrared light does not shine what is the reason

Infrared light power is not connected, cut off the power connector should have two red lines, are connected to the positive pole

Q:Is to use two TV sets, and can use this one to monitor the camera. Can I? How should I pick, but also with what accessories. Please prawn help me, thank you

The easiest way is what is not directly connected to the line, this method is the most simple and most reliable, with a long time to use three links is also easy to oxidize the problem! The line directly connected to the line, to the TV then then a lotus joint on the line, that is, like the DVD cable that line on the line!