1mm - 20mm PVC Rigid celuka Foam Board
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m³
- Supply Capability:
- 10000 m³/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
1mm - 20mm PVC Rigid celuka Foam Board
Product Introduction
PVC foam board is made from polyviny chloride, with flat plate surface, it is widely used in construction, advertising display boards, mounting board, screen printing, carving, etc.
PVC foam board / sheet / pallet is the best material in block making industry as the carrier of the green blocks, it has the advantages of highest strength with smooth surface, moisture proof and heat-resistant, it can maintain stable performance under high temperature. Waterproof, anti-corrosive ametabolic and recyclable,moisture resistant,lightweight.
2.Product Features
Regular size: 1220*2440mm,1560*3050mm,2050*3050mm
Thickness：1-33mm
Density：0.35-0.9
1 | Product | PVC Foam board/sheet/panel |
2 | Standard size | 1220mm × 2440mm ; 1560mm × 3050mm ; 2050mm × 3050mm and so on |
3 | Thickness | 1~ 30mm |
4 | Density | 0.4~ 0.8g /cm 3 |
5 | Brand | TSC |
6 | Color | White, Black, Red, Green, Pink, Grey, Blue, Yellow, etc |
3.Characteristics:
(1) Light weight
(2) High strength
(3) Easily cleaned
(4) Easily fabricated
(5) Outstanding printability
(6) Uniform fine close cell structure
(7) Good resistance to light and weathering
(8) Low flammability
4.Product Features
(1) Light weight, waterproof, fire retardant and self-extinguishing
(2) Sound insulation, heat insulation, noise absorption, heat preservation and anti-corrosion.
(3) Tough, rigid with a high impact strength, not easy to age and can keep its color for long
(4)Easy to clean and maintain.
(5)Envioronmental-firendly green and lead-free.
5.Picture show:
5.Why Choose us
1. we have our owned pvc foam sheet factory located , China's most popular pvc sheet production area,
which make sure the production ability and products high quality.
2. our office located in Beijing , the capital of china , it makes us to keep in touch with buyers timely and very convenient for business talking in our office.
3. our overall different department makes us the high standard of working efficiency. such as our solid financial deparment, sales department, documents department and logistic department .
6.FAQ
Q: If the products have some quality problem ,how will you deal with it?
A: If the quality problem caused by us, we will provide a replacement service,and we must keep in mind.
Take measures to control quality strictly,we adhere to the principle: “ quality first”.
- Q:Home wall decoration PVC wall panels how practical it
- Wall is best to use wallpaper, do not recommend using pvc
- Q:Pvc board and rubber contact why fade?
- Production of PVC sheet on the use of toxic compound lead salt more stable, more cost-effective Baohua PVC efficient heat stabilizer patent series
- Q:Is there a fitting, or a way, that will both convert a pipe from PVC/CVPC to copper and reduce the size?I have old copper pipes that continually spring leaks. These pipes run along the basement ceiling which are easily accessible. I am planning on leaving the copper pipes that come off the main lines and go up into the house to the faucets.I am planning to replace the main pipes with PVC/CPVC. The main lines are one inch and the copper pipes being left are a half inch.My question is, is there a fitting or a way, that will both convert the pipe from PVC/CVPC to copper and reduce the pipe from one inch to a half inch.Thank you
- In the plastic, put on a slip x thread adapter- one side is the glue fit, the other is female pipe threaded. Then put a copper threaded adapter into the threaded side of the plastic. Do the reduction with plastic fittings to keep it simple. It you want to split the line so that you don't reduce the total volume drastically, put a tee on the 1 plastic and reduce each end of the tee to make two copper connection points.
- Q:Can PVC be used for automatic painting?
- PVC material to paint. First look at the surface polished look. With 800 or 1000 of the sandpaper, polished after the need to spray a layer of plastic primer in the above. So that in the paint can be. Since the paint will be dry, and soon done, but the effect is not so good, no luster, and a long time to fall off. Recommended to the paint shop to buy a good point of paint. Be sure to spray a layer of plastic primer on the surface, or else you will use the paint industry will no longer fall off. Even if it is imported paint will fall off.
- Q:The head that links into the tub broke off when i was tightening it and i turned the nob so water shouldn't run but its still leaking. My repair guy can't make it for a few days. Its leaking on the rug and going through the ceiling to the first floor!!! I tried to duct taping it but no matter how much i use it still leaks through the cracks after minutes. I need a cheap quick fix till the repairman comes.
- only thing to do is shut off the water either to that area or the whole unit. turn it back on briefly to refill toilets and turn back off before the pipes recharge with full pressure. at least it wont leak as much and especially over night etc. turn on a tap to relieve the pressure in the pipes after you turn off the water.
- Q:Pvc clean sheet is what material
- Is the PVC plastic plate
- Q:Where there are selling pvc board, in addition to walking OKorder
- Jingdong, Sogou, , Alibaba, OKorder
- Q:In a thickness of 2.3mm on the board out of the hole 20, the die value of 20.2, the knife has a polished, punch 20, punch out of the hole often crack, and even bubble-like, clearly see the original surface separation Will this question how to solve it, Punching out of the wafer but also pressure back to the product, in order to smooth, I die in the die where the small chamfer, the problem will not appear on this?
- Tighten the periphery
- Q:Pvc board do cabinet how exactly? Urgent demand
- PVC is what you usually hear the molding plate. In general it is a good plate. But the mold is also good or bad. Germany's Reynolds film performance is good! Forgive, never heard of. May it be a new board. PVC is actually plastic, pure plastic door, right? In short, you pay attention to several aspects of the good, moisture-proof performance, the board of the hardware holding performance, the environmental performance of sheet metal, plate cost-effective just fine. General doors are fibreboard, which is the MDF, including solid wood door, its central structure is also attached to the solid wood paste
- Q:15 thick PVC board 90X160 how the size of how to fix the wall and PVC above also installed 8 thick pressure and PVC board size
- Can be drilled with a screw fix problem is not exhaustive PVC outside to install 'Agu Li' is it?
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
1mm - 20mm PVC Rigid celuka Foam Board
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m³
- Supply Capability:
- 10000 m³/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
