Blow Moulding Machine for 2L Plastic Bottle Double Station
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 4 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Automatic Blow Moulding Machine for 2L Plastic Bottle Double Station
Double Station 2L Plastic Bottle Blow Moulding Machine Production Line Feature:
Reasonable equipment design, compact construction, simple operation
Equipment with high degree automatic, cost less expenses
Electrical equipment, Hydraulic system, Seal parts and Lubrication system adopt the components of famous factory in the world, with low failure rate.
To achieve the best quality guarantee, no matter the appearance and internal, blow moulding machine rate of quality goods is above 99%.
Double Station 2L Plastic Bottle Blow Moulding Machine Technical Characteristic:
Double Station 2L Plastic Bottle Blow Moulding Machine adopt European technology, control the hydraulic system with pressure and flow double proportion. The speed of pressure can adjust nonpolarly, high stability, exchange control the electrical system with man-machine interface. Operating surface has a machinery safety configuration, two electrical safety configuration to ensure the safety of operators.
PLC+touch screen, making the operation easy. Automatic malfunction alarm with selfdiagnosis, making the malfunction clear at a glance.
Center input die head, eliminating the knit line completely and making it easy to change the material and color.
Double linear rolling motion guider in moving, opening and closing mold, making the clamping force equally distributed, so the cut is smoother.
Control the hydraulic system with imported proportional valve, ensuring the action steady, accurate and energy saving.
High speed and efficient plasticizing system, mixing well and ensuring the produce purity.
Double Station 2L Plastic Bottle Blow Moulding Machine Parameter:
Specifications | Units | Double Station |
Material | PE.PP.PA...... | |
Max container capacity | L | 2 |
Number of die | set | 1 |
Output（Dry Cycle） | Pc/hr | 900*2 |
Machine dimension（L×W×H） | M | 2.8*2.2*2.4 |
Total weight | ton | 4.3 |
Clamping unit | ||
Clamping force | KN | 65 |
Platen opening stroke | mm | 128-368 |
Platen size | mm | 300*320 |
Max mould size（W×H） | mm | 300*320 |
Mould thickness | mm | 153-300 |
Power | ||
Max drive | KW | 20.5 |
Total power | KW | 26 |
Fan power for screw | KW | 0.14*3 |
Air pressure | Mpa | 0.6 |
Air consumption | m³/min | 0.6 |
Average energy consumption | KW | 15 |
Extruder unit | ||
Screw diameter | mm | 60 |
Screw L/D ratio | L/D | 24 |
Plasticizing capacity | Kg/hr | 70 |
Number of heating zone | zone | 3 |
Extruder heating power | KW | 6.5 |
Extruder driving power | KW | 15 |
Die-head | ||
Number of heating zone | Zone | 3 |
Power of die heating | KW | 1.8 |
Max die pin diameter | mm | 100 |
Center distance of double die | mm | 130 |
Center distance of tri-die | mm | 110 |
Center distance of tetra-die | mm | 60/80 |
Double Station 2L Plastic Bottle Blow Moulding Machine Parts Picture:
Mold Photo:
Double Station 2L Plastic Bottle Blow Moulding Machine Drawing Picture:
Double Station 2L Plastic Bottle Blow Moulding Machine Electrical Parts Photo:
- Q: What is the working principle of the oil filter?
- There is a rotor with double jet nozzle in its interior, only produced by oil pressure to provide the driving force. After opening, the pump will be sent to the oil tank inside the rotor, the rotor to be full of oil after the rotary table lower nozzle jet, which creates a driving force for the high-speed rotation of the rotor. Its speed can reach more than 4000-6000r.p.m, the power generated by the gravity of more than 2000 times, the principle of centrifugal force directly drive impurities from the oil in the separation. Hard, sharp, abrasive metal substance, plus residual products that cause parts to wear or deteriorate, even the size of 1 m can be removed. The impurities separated the impurities in the rotor of the collection cover, just cleaned regularly. In addition, because the proportion of water than oil, under the action of centrifugal force, the water from the oil separated from the existing rotor inner product oil receiver and only can be removed during cleaning. The filtered oil flows back into the tank directly by gravity.
- Q: Why is the oil filtered out of the oil filter cleaner?
- The oil filter can only filter the impurities and moisture in the oil
- Q: When the centrifugal oil filter is used to filter peanut oil, the oil color is black and cloudy. What's the matter?
- To filter peanut oil in centrifugal filter, you need to add proper amount of water. When the temperature of peanut oil is 80-90 degrees, add 2%-3% of salt water.If the filtration temperature is too low, the amount of brine should be reduced.
- Q: What happens when the oil heater is fired and the heater is tripped?
- With a universal watch to see the damping of the ground and heating rod damping, general leakage will trip, and there is open good and bad, useless, the naked eye to see the bad and bad probability is too small, must use table
- Q: My vacuum oil filter doesn't filter. Consult an expert
- Vacuum oil filter can not work properly, you should first think of is the direct dial phone manufacturers, the company let oil filter arranged professional and technical personnel on-site to solve, which is the least of the customer service service, but at least you as a consumer rights.
- Q: Working principle and operation instructions of vacuum oil filter for oil press
- The water vapor entering the condenser is cooled and then returned to the original water. The oil in the vacuum heating tank is drained into the static filter by the oil pump and filtered out by the filter oil paper or filter element. Thus, the whole process of removing impurities, moisture and gas in the oil by the vacuum oil filter is completed, so that the clean oil is discharged from the oil outlet.
- Q: Why does the oil filter run out of vacuum? How can we solve it?
- The cause of the accident in the oil level is too high) vacuum separator solution) open the equipment town valve, in order to reduce the level of vacuum separator in Chongqing tonre oil company to remind all the new and old customers, if you want to save the trouble, the best is in the purchase of equipment, requires manufacturers, provided with vacuum oil filter automatic bubble elimination device., this device can effectively prevent the vacuum injection, so as to protect the safety of the vacuum pump, prolonging the service life of the vacuum pump, to ensure safe and reliable operation of the vacuum oil filter, and also has the advantages of simple operation, reliable operation, easy maintenance, so that the oil filter efficiency will be higher. The above is the oil filter operation in the common fuel injection phenomenon, troubleshooting methods, hoping to filter oil customers in all industries to bring convenience.
- Q: How to deal with the overload indication of two-stage vacuum oil filter
- I don't quite understand. What's the meaning of "filter" or "what's the meaning of it"?
- Q: How does the 25 litre oil purifier determine flow?
- The flow rate is too low, affecting the work, the flow rate is too high, the cost is too much), the minimum particle size of the 2. oil filter (this is to take into account your company's oil situation, as well as the requirements of the particles in the oil)
- Q: Double barrel automatic electric heating centrifugal oil filter and oil separation automatic horizontal centrifugal oil filter which is better than
- Heating centrifugal oil filter is generally filtered, emulsified, that is, more water. Oil centrifugal oil filter oil filter more impurities
Send your message to us
Blow Moulding Machine for 2L Plastic Bottle Double Station
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 4 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
