Automobile Part Silicone Hose 45/90/135/180 Degree Coupler for Motorcycle/Truck
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 300000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Silicon Hose
Specifications
flexible high temperature silicone hose
1.factory price
2.ISO 9001
3.big productivity
4.good aftersales service
Product | silicone hose |
Working Temperature | -60-260 degree |
Working Pressure | 0.3 to 0.9 Mpa |
Bursting Pressure | 2Mpa |
Hose Thickness | 2mm to 6mm |
Hose Reinforcement | 1-5ply |
Size Tolerance | +/- 0.5mm |
Color Option | Blue/Red/Black/Orange or customized |
SHAPE | APPLICATION |
Straight meter hose | Radiator/Coolant connection Hose |
Straight coupler hose | Water connection Hose |
45°/60°/90°/135°Elbow hose | Vented Hose |
Reduction hose | Turbocharger connection Hose |
Hump hose | Air Intake connection Hose |
T hose | Intercooler connection Hose |
U hose | Fluorosilicone Hose |
TIPS | |
Custom products according to customers’drawing or samples. | |
Used for VOLVO,BENZ,BMW,TOYOTA,MAZDA,SCAIA,IVECO,AUDI,DAF,truck | |
Print your LOGO on the products | |
universal product!perfect for turbo,intercooler,intake,turbo charger projects ! | |
Application forTruck,Bus,Tuningcar,Racing car,Heavy Machine,Engineering.Vessel | |
Used for Automotive turbo charge,coolant,Air inlet/exhaust,Radiator,Heater system | |
Made for high remperature and high boost applications. |
Our service
Response time within 24 hours
Quick and on time shipment
Technical support
Product drawings and pictures available for customer's catalog design.
- Q:How about a rubber bar in a lathe?
- Because this material is the most soft, with high-speed steel lathe tool grinding sharp point processing, open wide and shallow groove, bad lubricating bottom light chip, cut with white steel knife knife cutter head 0.2mm wide angle needle like
- Q:How to maintain the car seals?
- First clean. If you don't clean the car's seal ring for a long time, there will be dirt in the car sealing ring, groove and slide rail, which will affect the sealing effect of the automobile sealing ring. Owners are advised to clean the seal every one or two quarters.
- Q:Are all the rubber made from petroleum?
- No, rubber is divided into natural rubber and synthetic rubber.
- Q:What kind of material is good for heat shrinkable tube of automobile air conditioner?
- Water pipe for car: inner and outer layers are made of three yuan ethylene propylene rubber, and the middle reinforcing layer is made of polyester yarn. Air conditioning tube (R134a): butyl rubber tube with reinforced layer. The outer layer of the hose is covered with holes in the outer layer with a hose needle hole machine to prolong the service life of the pipe. The outer layer of the air conditioner hose is usually protected by bellows, and the hose is usually protected with a sheath (EPDM material)
- Q:Want to know how the rubber skid on the bus handle is set up?
- It is soft and elastic. Heating (125 degrees) will shrink, widely used in a variety of wiring harness, solder joints, inductors insulation protection, metal pipes, rods rust prevention, corrosion protection.
- Q:How to change the rubber strip for boneless wiper?
- 1 before removing the wiper rubber strip, you need to remove the wiper first.2. Look at the rubber bar at the end of the wiper. You can't slide back and forth. The part that we can't slide is the part we want to remove.3, to find that part of sliding rubber strip, we can remove this end for fixing clips, clips are generally not difficult to get down, can be used to assist the dismantling of nose pliers if special enough.
- Q:When I opened the hood of the car today, a black rubber fell on it. I couldn't see it. What should I do?
- This thing is to prevent the engine head cover and engine compartment contact, play a buffer role. If you drop it, go to the 4S shop and get one, something worthless.
- Q:How to properly clean automobile engines, rubber and tires and other parts?
- The procedures for cleaning and beautifying the engine are as follows:(1) before scrubbing, remove dust or fine sand with a brush or jet gun.(2) be sure to spray detergent onto a sponge or brush before wiping it.(3) the black resin parts can be cleaned and protected by plastic parts, so that the wax can be renewed. If it is sprayed directly, it may be sprayed into the place where it should not be sprayed.
- Q:Can the waterproof sealing strip for sunroof glass be changed?
- Yes, but the price is more expensive. You can change it at the 4S store.
- Q:How can a soft rubber bar be machined on a lathe? The hole drilled by the drill hole is triangular
- We are in the ordinary lathe on the lathe, the tool is worn by the white bar, clamping time can not be too hard, and do not extend the chuck too long. Move the drill a little slower.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Automobile Part Silicone Hose 45/90/135/180 Degree Coupler for Motorcycle/Truck
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 300000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords