Q:What's the difference between turbine butterfly valve and manual butterfly valve?

Butterfly (Manual butterfly) butterfly plate installed in the direction of the diameter of the pipe. In the butterfly valve body cylindrical channel, the disc shaped disc rotates around the axis. The angle of rotation is between 0 and -90 degrees. When rotating to 90 degrees, the valve is fully open.Butterfly valve structure is simple, small size, light weight, only by a few parts. The utility model can be rapidly opened and closed only by rotating 90 DEG, the operation is simple, and the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the butterfly plate thickness is the only resistance when the medium passes through the valve body, so the pressure drop produced by the valve is very small, so the flow control characteristic is better. Butterfly valve has an elastic seal and metal seal, two types of seals. Resilient sealing valve. The sealing ring can be mounted on the valve body or attached to the periphery of the disc.

Q:What does the butterfly valve D361H - 25C DN350 mean?

Welded turbine butterfly valve, hard seal, material: cast steel, pressure 25KG, caliber 350MM

Q:What kinds of butterfly valves are available? What is the working principle of butterfly valves?

According to the form of sealing:(1) forced sealing butterfly valve.1) elastic sealing butterfly valve. The pressure of the valve seat, seat, or plate is produced when the seal is closed by the pressure from the valve.2) additional torque seal butterfly valve. The seal is produced by a torque that is applied to the valve shaft.(2) pressure sealed butterfly valve. The pressure is greater than the pressure on the seat or plate.(3) automatic sealing butterfly valve. The pressure of the seal is automatically generated by the pressure of the medium.Divided by work pressure:(1) vacuum butterfly valve. Working pressure is lower than the standard atmospheric pressure butterfly valve.(2) low pressure butterfly valve. Butterfly valve with nominal pressure PN<1.6MPa.(3) medium pressure butterfly valve. Butterfly valve with nominal pressure PN 2.5--6.4MPa.(4) high pressure butterfly valve. Nominal pressure PN is 10. 0--80.0MPa butterfly valve.(5) ultra high pressure butterfly valve. Butterfly valve with nominal pressure PN>100MPa.

Q:I HAVE A 2003 FORD EXPEDTION THAT IS IDLE ROUGH,AND WILL EVENTUALLY STALL. TODAY I FOLLOWED THE PCV VALVE HOSE TO THE BACK OF THE THROTTLE BODY AND NOTICED THERE IS A BIG HOLE ON THE ELBOW OF THE HOSE. HOW CAN I CHANGE IT? CAN I JUST FORCE THE HOSE OUT AND SIMPLY PUT A NEW ONE? BEEN HAVING THIS ROUGH IDLE /STALL PROBLEM FOR A WHILE I CLEANED IAC VALVE, THROTTLE BODY CHANGED THE AIR FILTER AND ALSO CLEANED THE MASS AIR FLOW SENSOR, I HAVE A P0171 system to lean(bank 1) code

just undo the clamps, and pull. it may need some wiggling and tugging, as its been on there for 9 years now without moving. put on your new hose, and replace the clamps, and youre done. next time, try not using all caps. it doesnt make us want to answer your question anymore just because its in caps, in fact, maybe a little less.

Q:I want to switch off the water in the bathroom only due to replacing sink taps, will water still come out of the pipe if i turn the stop valve

Water should be off to the sink is the stop valve off

Q:I got my timing belt done on a 1999 Civic Si on September 26 @ 113,699 miles. at 116,9xx miles I bent a valve on my third cylinder. How likely is it that the timing belt is the reason why this happened? I heard that if the timing belt is a tooth or so off, it could bend a valve. So is it likely that this could have happened? Anyway to check?

COMPRESSION TEST OR CHECK ALL TIMING MARKS TO SEE IF THEY ARE IN ORDER

Q:Electric butterfly valve (not take the lead) what do you mean?

Electric butterfly valve, as its name implies, consists of an electric actuator and butterfly valve, and the customer does not take the lead, that is, without the electric actuator, only the butterfly valve can be provided.

Q:In the pipeline attached building Atlas 05S502, in the middle of a water meter and check valve, the two sides are divided into two butterfly valve, want to ask why to arrange this way, what is the role of the two butterfly valve?

Check the water gauge and check valve on both sides to facilitate the maintenance and replacement of water meter and check valve.

Q:Hey YA! I am looking at getting an 01 Honda Prelude this month and valve adjustment keeps coming up when people discuss this car and other cars as well. What is this? Does it cost a lot to do, and is it important? Thank you!

Some cars have little hydraulic gizmos to keep the valves more or less where they're supposed to be. Doing without them is, according to some, a tad more precise, but you have to have the valves checked now and then. (On my old Celica, it was a 60k maintenance item.) It will probably run a hair better afterwards.

Q:When will Butterfly Valves be used?

Butterfly valve has the advantages of simple structure, easy operation, small footprint and light weight;1, for the city water supply network in general, DN300 still DN300 valve, butterfly valve above, this installation is convenient (especially large diameter valve installation is inconvenient, the weight of large volume, big);2, there are sediment pipeline, such as powder, mud and other mixed substances;