KLU26-800 Bored Pile Drilling Rig for Sale
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
KLB20-600 Bored Pile Drilling Rig for Sale
Product Features:
A Wide Choice Of Product: |
>>Our company is capable to manufacture various types of KL series drilling rigs. The max drilling depth could reach 20m to 34m.A wild range of products could be chosen for your practical needs. |
The column of the piling frame has two types, square and round. The former type applies back lift method. It is easily installed, safe and stable. The later type applies front lift method, the support rod will adjust itself when lifting the column. The column is higher, the drilling depth will go deeper. |
|
Higher Efficiency And Lower Consumption: |
>>The hydraulic system uses constant power variable design with low loss.The large flow, low failure rate, and high efficiency piston pump ensures the hydraulic components working well. |
|
high Reliability And Flexibility: |
>>The rotation system works with hydraulic flow. The rotating speed could be controlled to avoid impact. The failure rate is much reduced. The assistant hoist also uses hydraulic winch so the winding speed can be controlled at the operator’s will. Such design provides much convenience in the working process. |
|
Convenience In Dismantling, Transportation And Maintenance: |
>>With many years improvement and seeking for perfection, each part of the machine has well considered its convenience in dismantling, transportation and maintenance. The height and width of the largest part is designed within the range of transportatio lmits. |
|
Humanized Design: |
>>Much effort has been taken to increase the technical content on our products as well as humanized design. The machine is integrated with mechanical, electrical, hydraulic, and electronic devices. The appearance of the machine body, the comfort of the operator, the agility of the movements and so on are all well considered when designing the machine.Remote-control handle is optional due to the client's needs. |
|
Unique Design: |
>>After many years of experience in manufacturing the machine and analyzing feedbacks from our loyal clients, we made unique improvements in the easy-malfunction parts on the drilling rig: The bottom pillar of the column uses universal joint to enable the pole adjusted from left-right and front-back directions. The side support adjustment mechanism uses hydraulic motor instead of electrical motor which may affect the adjustment stroke or worm and gear which may shorten the life period. The supporting leg cylinder base uses large round box structure to avoid distortion at the working process. |
|
Multi-function: |
>>KL series is our new generation multi- function piling frame: with different power plant it can not only be used to do bored pile drilling or construct continuous wall by SMW method, but also do diesel hammer or hydraulic hammer pile driving. |
KLU26-800 | ||
---|---|---|
Move method | Electro-hydraulic step | |
Max drilling depth | 26m | |
Max drilling diameter | φ800 | |
Max output torque | 48.5KN·m | |
Rod rotated speed | 23r/min | |
Allowed lifting force | 400KN | |
Power for power head | 55KWX2 | |
Reductor of power head | ZZSH480 | |
Leader size | φ630X8 | |
Leader height | 31m | |
Leader oriented center distance | 600Xφ102 | |
Leader incline range | 5°front inclination 3°back inclination | |
Length of crawler on the groud | 4.0m | |
Width of track plate | 800mm | |
Climbing ability | <4° | |
Rotary | Rotary way | Rotary motor |
Rotary angle | ≤360° | |
Rotary speed | 0~0.3 | |
Main winch | Single pulling force | 5T |
Increasing speed | 2.0/2.6/3.2 | |
Motor power | 22KW | |
Assist winch | Single pulling force | 2T |
Increasing speed | 20m/min | |
Motor power | 7.5KW | |
Overall dimension(L*W) | 10m×5.2m | |
Total weight(T) | 64T |
FAQ
1.Which payment terms can we accept?
Normally we can work on T/T term or L/C.If you choose T/T,30% payment is required in advance and 70% balance shall be settled before shipment often,it rang a little.
2.How long will our price be valid?
We are friendly dealer, never greedy windfall profit, our price remains stable,except the exchange rate and the increasing labor cost and material cost.
3.What are our advantages compared with manufacturers?
a.Detailed training-We can provide training services to different users. The training sessions include product training,operating training, maintenance know-how,standard and so on to fulfill your individual needs.The training can be conducted at client’s site.
b.Available after service-With our global distributor network, you are guaranteed with fast deliveries and services if you submit your requests.
- Q:Code for installation and operation of pile drivers
- 4. Check whether the voltage of the power supply meets the requirements.5, according to the daily maintenance project to each department lubrication, maintenance.Five, pile driver in the work safety precautions:1, when the piling machine work, there should be special command. The conductor and operator should check each other's signals before they work. Work closely together.2, at the start of the bell signal or other applications, notify the staff around to leave.3, hammer and pile cap, pile cap and column (or pile) plane to pad, a connecting bolt should be tightened, and should always check whether there is loose.4. The starting of the pile driver should be adjusted from low gear to high speed.5, the pile driver in the work should be closely observed on the control panel current, voltage instructions. If abnormal sound or other abnormal conditions are found, stop inspection immediately.6, always check the temperature of the bearing and the bearing cover screws is loosening, should strictly examine the eccentric block coupling screw loosening, prevent the occurrence of accidents.7, sink, column (or pile) prohibited to stand around.8, piling machine with water, mud suction sink, should contact in advance with the relevant personnel, and take care of each other at work.9, long pipe column or pile and the installation of pile cap, the staff must wear safety belts.10 、 in the process of sinking, it is strictly prohibited to do mechanical maintenance work.Six after the stop of the piling machine, the power shall be cut off immediately, and the pile driver and motor shall be inspected and maintained.Seven, piling machine long-term disabled, should be kept in storage, the motor should be good moisture-proof protection, the control panel of the instrument, should be removed, storage, storage.
- Q:The piling machine and the appearance are not considered as large machinery import and export fields
- See what kind of bar! If it is a small blue ocean highway, the pile driver is not large, even if the loading type.
- Q:Safety requirements for diesel hammer pile drivers for diesel hammer pile drivers
- 1, the pile driver walking and slewing, hanging pile, hammer should not be carried out simultaneously. The pile driver shall not turn or walk in full swing after hanging the pile. 2 Side Piling and long distance pulling pile are not allowed in pile driver. When the pile is hoisted in front, the horizontal distance of concrete shall not be greater than 4m, and the steel pile shall not be larger than 7m, and the pile shall be prevented from colliding with the post. 3 when the column is turned into place and the column is locked, the piling frame of the double guiding post can be operated. 4 before the start of the diesel hammer, the pile hammer, the pile cap and the pile should be on the same axis, and shall not be driven by eccentric piling. 5 in soft soil pile driving, should first close the throttle, cold beat, to each attack penetration is less than 100mm, can start the pile hammer. 6 after the start of the diesel hammer, the landing gear should be lifted. The distance between the landing gear and the top of the cylinder of the cylinder hammer shall not be less than 2m during the hammering process. 7 when the diesel hammer is running, the jumping height of the impact part shall be visually observed, and the requirements of the instruction manual shall be strictly enforced. When the required height is reached, the throttle shall be reduced and the stroke of the impact part shall be controlled. 8 during the operation, attention should be paid to the change of the soil layer and the operation of the pile driver, and the necessary measures should be taken in time. 9 diesel hammer appear early ignition, should stop working, according to the instructions for processing. 10 when the piston jumps on the cylinder hammer, the grease should be observed to flow out of the drain hole. The lubricating oil of the lower piston shall be filled according to the instruction manual.
- Q:Types of pile drivers
- The hammer into the exhaust valve reversing by manual control, can also be installed in the side with the hammer and hammer lifting flange lever automatic control, impact stroke two ways can adjust the hammer. Three diesel hammer body is made of cylinder and piston, similar to the working principle and the single cylinder two stroke diesel engine into the cylinder combustion under high temperature and high pressure atomized diesel combustion chamber by injection pressure generated by the detonation driven hammer working. According to the structural form of diesel hammer rod and cylinder type separation. The guide rod type diesel hammer is pressed on the pile cap with a plunger as a hammer seat, and the cylinder is used as a hammer head to move up and down along the two guide rods.
- Q:Why is AMD's CPU name a pile driver or something?
- Translates the name called ~ ~ (meaning direct translation).For example, MR white can be called Mr. bai.
- Q:My home behind the plant in piling, the distance is about 25 meters, when piling not only hear the sound, even the house seems to be in the earthquake, how many distance from the house safe?
- How far can not say, geological distribution is too complex, the size of pile driving machinery, but one thing is not only phenomenon during the hearing a voice, even the houses are like in the earthquake, it was not safe for a long time, the house will certainly be affected.
- Q:AMD FX 8350 eight core CPU AM3+ piling machine and tin box what is the difference between the master pointing
- But I don't think AMD's best CPU is comfortable with 3 generations of I5. Convert video files, 8 kernel conversions, 5 loads, and 5 88%-93% loads. But the AMD platform, CPU, is a good game to play.But you do not tangle FX8350 and CPU tin boxes are the same, only the original box packing box fan is different these can ignore the FX8350 are on separate heat.
- Q:How much is piling foundation for pile driving machine?
- A pile driver in Hunan Huilong domestic piling machine is relatively good, driving speed is very fast, with less, the most important is the customer service service is very good,
- Q:PV pile driver
- Shandong Tengzhou production of this idiot manufacturers have a few, can come to Shandong to look strong, has many years of construction experience in complex terrain. Can prevent landslides and broken stones.
- Q:What's the difference between a amd bulldozer and a pile driver?
- Pile driver fx4300 83506300Bulldozer fx4100 61008300The fx4300 specifications are weaker than 4100 (three slow), but benefit from the architecture process instruction set improvement. The performance is similar to that of, and the fx4100 performance is similar to 640.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
KLU26-800 Bored Pile Drilling Rig for Sale
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords