Q:Why hand grinding sand turbine, electric drill, impact drill and other power tools plug is two, plug is not three plug

Hand-held power tools, in the past there are many plugs with three eyes, the purpose is that in case the leakage can pass through the grounding wire, the current will be introduced into the earth, and the protection of the human body.In practical applications, because of the mobile work and the use of temporary power supply, and the grounding of the sockets in many places is not reliable, it is not ideal to implement the leakage protection by grounding.

Q:What's the role of carbon brushes in electric tools?

Carbon brush specific function1. the external current (excitation current) is added to the rotor by carbon brush (input current);2., the static charge on the big shaft is introduced into the earth (carbon brush) through the carbon brush (output current);3. lead the main shaft (ground) to the protection device for rotor ground protection and measure the positive and negative voltage of the rotor;

Q:What material does the power tool housing fit?

Electric drill: the main specifications are 4, 6, 8, 10, 13, 16, 19, 23, 32, 38, 49mm and so on. The figures refer to the steel whose tensile strength is 390N/mmThe maximum diameter of a drill drilled on a material. For non-ferrous metals, plastics and other materials, the maximum drilling diameter is comparable to the original specifications of 30 to 50%.Electric grinding machine: a tool for grinding with a grinding wheel or millstone. A vertical electric wheel and electric angle grinder.Electric wrench and electric screwdriver: used for loading and unloading threaded fittings. The driving mechanism of the electric wrench is composed of a planetary gear and a ball screw groove impact mechanism. Specifications are M8, M12, M16, M20, M24, M30 and so on. An electric screwdriver adopts a clutch, a transmission mechanism, or a gear drive mechanismThere are M1, M2, M3, M4, M6 and so on.

Q:How about plug wires and cables for power tools?

Class II tools must be made of an insulated power plug, and the power plug is joined to a soft cable or cord to form a non renewable power plug. Class II tools only allow the use of non - renewable two pin power plug. The II class tools are marked with "back"". Class III tools, that is, secure voltage tools. Its rated voltage is not more than 50V, and the protection against electric shock depends on the power supplied by the safety voltage and no voltage higher than the safety voltage in the tool.

Q:How to detect the rotor of power tools?

The rotor has no force. Most of them are burned out of the rotor, and many rotors can be removed if they are removed. One can distinguish, such as commutator commutator shedding, excessive wear. Have the commutator between electrodes and arc erosion serious. Rotor winding, inhaled by the fan, damage caused by damage to the rotor.

Q:How are the I, II, and III classes of power tools classified?

In accordance with the electric shock protection methods, electrical equipment is divided into the following 4 categories:0 category. The device relies solely on basic insulation to prevent electric shocks. There are no ground terminals on the live conductors of the 0 types of equipment.

Q:What kind of power tools are hand drills? 1, 2 or 3?

I class: in the prevention of electric shock protection, in addition to relying on basic insulation, but also the need for zero protection.Class II: the tool itself has double insulation or insulation without the need to protect the ground.Class III: Powered by a secure, ultra low voltage power supply, no voltage higher than the safety supply voltage is generated within the tool.The above is the classification of insulation categories.

Q:What devices must be available for all hand held electric tools?

Anti leakage, splash prevention, anti movement, anti overheating

Q:What are the common rotors of power tools?

Hammer and drill: used for concrete, brick and building components on drilling, slotting, dehairing. With expansion bolts, installation can improve the speed and quality of pipeline, machine equipment; impact hammer principle is to rely on the internal movement of the piston impact force, impact principle of impact drill is running in gear impact force, so the impact hammer is greater.Concrete vibrator: used for pouring concrete foundation and reinforced concrete members, tamping concrete to eliminate air holes and increase strength. The high-frequency disturbing power of the electric direct acting vibrator is driven by an electric motor to rotate the eccentric block, and the motor is powered by an 150Hz or 200Hz intermediate frequency power supply.The planer: used for planing wood or wood structure, mounted on the bench can be used as a small bench plane. The planer cutter shaft by the motor shaft through the belt drive.Electric tools commonly used bearing type: 606, 607, 608, 626, 627, 628, 629, 6000, 6001, 6003, 6004, 6200, 6201, 6202, 6203, 6303, 61907, 688 commonly used carbon brush models: 50#, 408#, 43#, 44#, 303#, 21#, 6M etc.

Q:How are hand powered tools classified into class I, class II, class III?

Class I protection against shock of the product depends not only on the basic insulation of the equipment, but also on additional safety precautions. The method is to connect the electrically conductive parts that may be touched with the protective wires in the installed stationary lines so that the accessible, electrically conductive parts are not electrified in the event of basic insulation damage. Such products are: hand-held power tools, mobile daily appliances, mobile mechanical and electrical equipment.