Details of Cordless Driver/Drill :
* CN18-2 Li
* Battery Voltage: 18V
* Housing Material: PA6-GF30%+Over Mould
* No Load Speed 1(Rpm): n0 0-400r/min SPMA10%
* No Load Speed 2(Rpm): n0 0-1300r/min SPMA10%
* Torque Setting: 15+1
* Max Torque: 42N.m
* No Load Current(A): 2.3A MAX
* Chuck Size: 3/8''(10mm)
* Battery Cell Type: 1300mAh or 1500mAh 3.6v/Li-ion
* Normal Capacity Time: 1 hour
* Net Weight including battery: 1.4Kg
* Dimension(with P/P): L195*H235*W55mm
* Drilling/ Screwing capacity: Screw sizes: 9/32''(7mm), Steel/Aluminum: 3/8''(10mm), Wood: 11/8''(29mm)
* W/2 speed, Auto-lock, Auto-stop, LED light, mini body, soft grip
Charger of Cordless Drill 18V:
* Charger Time: 1Hour
* Housing Material: ABS
* Input Voltage: 110-230VAC
* Frequency: 50/60Hz
* Output Voltage: 18V-DC
* Output Current: 1.3A/1.5A
* HI-POT: 1500V/3mA/1s
* Dimension: L150*W155*H85 mm
* Weight: 0.7Kg
- Q:Why hand grinding sand turbine, electric drill, impact drill and other power tools plug is two, plug is not three plug
- In recent years, leakage protection performance and the reliability greatly, has become a standard power supply, reliability of human protection over ground protection to a certain extent, but the impact of grounding protection and leakage protection to human body protection, so many hand-held electric tools to cancel the earthing protection, relying instead on leakage protector. And use the two eye plug.Look at the instructions for the hand-held power tools with two plugs. All require that the power supply be equipped with an electric leakage protector.
- Q:Is BOSCH's power tools good or MAKITA's power tools?
- MAKITA electric tool features:The utility model has the advantages of small noise, strong power, good performance, long service life, light body, strong and durable, easy operation and convenient repair. The utility model is the necessary high-quality product for professional personnel or amateur DIY personnel.
- Q:What devices must be available for all hand held electric tools?
- Hand held electric tools, insulation measures are in good condition, must be equipped with qualified leakage protection device, forbid to change the power cord and plug, use special flow switch box.
- Q:What kind of material does the power tool case have?
- In 1895, the German overtone produced the world's first direct current drill. The outer shell is made of cast iron and can drill holes in the steel plate 4mm. Then there was a three-phase power frequency (50Hz) electric drill, but the motor speed failed to break through the 3000r/min. In 1914, there was a single-phase electric motor driven by a series of exciting motors, and the motor speed was over 10000r/min. In 1927, the power supply frequency of intermediate frequency electric tool 150~200Hz, it not only has the advantages of high speed single-phase series motor, and has the advantages of simple structure, reliable three-phase motor, but because the need if current supply is limited.
- Q:Is there an electric tool for screwing bolts? It's bolts, not screws?
- Yes, electric wrench.An electric wrench is a wrench powered by a power source or battery. It is a tool for tightening bolts. It is mainly divided into impact wrench, torsional shear wrench, fixed torque wrench, angle wrench, angle spanner, hydraulic wrench, torque wrench, rechargeable electric wrench.
- Q:What are the commonly used rotor types for power tools?
- Electric drill: the main specifications are 4, 6, 8, 10, 16, 19, 23, 25, 32, 38, 13, 49mm and so on. Figures refer to the maximum diameter of the drill drilled on the steel whose tensile strength is 390N/mm. For non-ferrous metals, plastics and other materials, the maximum drilling diameter is comparable to the original specifications of 30 to 50%.Electric grinding machine: a tool for grinding with a grinding wheel or millstone. A vertical electric wheel and electric angle grinder.Electric wrench and electric screwdriver: used for loading and unloading threaded fittings. The driving mechanism of the electric wrench is composed of a planetary gear and a ball screw groove impact mechanism. Specifications are M8, M12, M16, M20, M24, M30 and so on. The electric screwdriver adopts the embedded clutch, transmission mechanism or gear drive mechanism. The specifications include M1, M2, M3, M4, M6 and so on.The hammer and drill: used for concrete, brick and building components on drilling, slotting, dehairing. With expansion bolts, installation can improve the speed and quality of pipeline, machine equipment; impact hammer principle is to rely on the internal movement of the piston impact force, impact principle of impact drill is running in gear impact force, so the impact hammer is greater.
- Q:Power tools are power tools?
- Divided into electric, pneumatic, gasoline tools, currently on the market these 3 main types. I've been a tool for over 10 years
- Q:What is the difference between a flashlight and an electric screwdriver?
- A flashlight is a drilling tool powered by alternating current or direct current batteries. It is a hand-held electric tool.The main components of a drill are a drill chuck, an output shaft, a gear, a rotor, a stator, a casing, a switch and a cable.Electric torch (pistol drill) -- a tool used for drilling metal, wood, plastics, etc.. When equipped with positive and negative reverse switch and electronic speed regulating device, it can be used as electric screwdriver. Some models are equipped with rechargeable batteries, which can work normally within a certain period of time without external power supply.
- Q:What power tools are used as cage birds?
- If you want to do copper ornaments, you should distribute the grinding belt, flexible shaft, tool set. You can also buy a flashlight with a flexible shaft, coupled with some tools, you can also head. Bakelite milling can also be used instead of drill, a horizontal milling type fixed electric drill and milling cutter. What depends on your workload?.
- Q:What are power tools?
- There are many kinds of power tools! Hammer, impact drill, electric scissors, electric planer, grinder, plastic welding gun, pistol drill, electric iron, curve sawing machine and so on, there are a lot of marble.
We are a manufacture specialized in rechargeable power tools. Our products include cordless series in Drill Screwdriver. Flexible lamp Saws and it's fit together series. Beside,we are incessant imploding the new products for our clients and market.We are holding the certification for "GS" "CE" "EMS" "CSA" etx. Also,is in the process with ISO9000.
1. Manufacturer Overview
|Annual Output Value
||US$ 10 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||71% - 80%
|No.of Employees in Trade Department
||About 2,000 square meters
|No. of Production Lines
||OEM Service Offered; Design Service Offered
|Product Price Range