Gasket High Quality SBR Rubber Ring DN1600
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Description of gasket :
Ginseal Spiral-wound gaskets comprise a mix of metallic and filler ma- terial. Generally, the gasket has a metal (normally carbon rich or stainless steel) wound outwards in a circular spiral (other shapes are possible) with the filler material (generally a flex- ible graphite) wound in the same manner but starting from the opposing side. This results in alternating layers of filler and metal.
This gasket is formed with stainless steel 304/316 and graphite,non asbestos,ptfe or other seal material. It is the best gasket for muffler pipe or flang gasket.
It could be standard style,it just formed stainless steel and graphite or non asbestos etc.
It could be add inner ring or outter ring.The material ring could be carbon steel or stainless steel.
2.Features of gasket :
• Wide range of applicable working condition,high temperature and high pressure resistance,applicable to super low temperature and vacuum condition.Chemical resistant gasket is available under various medium,through change of composition of gasket.
• Strong stress compensation,stable and reliable sealing performance even under frequent pressure fluctuation condition.
• Perfect sealing performance.
• Normal requirement of flange surface finishing which contact with gasket.
• Easy installation and low pre-tightening stress of gasket.
• Heat treatment industry for furnace parts, fans, tube hangers, and baskets and trays to hold small parts.
3.Gasket Images:
4.Specifications of the gasket:
1. Material:Stainless steel, PTFE, graphite, Carbon steel
2.Temperature:-196~700degree
3.Standard:ANSI,HG,ISO
Packaging Methods:
Inner by the plastic bag, outer by the carton; or as the customer's demands.
Shipping Methods:
1. By International Express: DHL, FEDEX, UPS, TNT
2. By Sea (Loading Port: QingDao, China)
3. By Air
5.FAQ
Ask 1: Why some supplier give me the price much cheaper than you?
Answer:1.They wanna attract your attention,while you contact with them,they would raise the price by any reason.
2.They willn't provide the high qualities to you cause it had the cheap price.
Ask 2:What the MOQ?
Answer:The MOQ should reach 800 kilograms
Ask 3:Should i pay for it If some product need molds?
Answer:I'm afraid you should pay for it,However,We would return it back when we get the first order.
Ask 4:What's the delivery circle times ?
Answer:About 2 weeks and we would give the accurate time when we know the quantity.
Ask 5:What's the FOB port?
Anser:Our port are Shanghai and Ningbo usual.
Ask 6:Your price seems higher than others.
Answer:As you know,Price equals qualities.We have faith in our qualites.But it must be in the acceptable range
- Q:How to distinguish between rubber and polyvinyl chloride?
- 1) preparation: vinyl chloride monomer (vinyl, chloride, monomer, referred to as VCM) in peroxide, azo compounds and other initiators; or under the action of light and heat, polymerization by the principle of free radical polymerization of polymers. The vinyl chloride homopolymer and vinyl chloride copolymer are collectively referred to as vinyl chloride resins.2) properties: white powder, amorphous structure, degree of branching is small, the relative density of about 1.4, the glass transition temperature of 77~90 DEG, 170 DEG C to decompose, the stability of heat and light, at 100 DEG C or after long time exposure to sunlight, will decompose and produce hydrogen chloride, and further automatic catalytic decomposition that change, the physical and mechanical properties also decreased rapidly, in the practical application must be added in order to improve the stability of heat and light stabilizer of the.
- Q:What is the difference between natural and synthetic rubber?
- Natural rubber is mainly derived from the Hevea tree. When the epidermis of this rubber tree is cut open, it will shed milky juice. It is called latex, and the latex will be natural rubber when it is condensed, washed, molded and dried.
- Q:Is sandal rubber bottom good or polyurethane good?
- Overall, the bottom and bottom of polyurethane rubber polyurethane rubber bottom bottom than everyone has his hobby, more wear and more folding, but lighter than polyurethane rubber bottom bottom.
- Q:Can rubber products be injection molded and plastic injection functions?
- Rubber products can be injection molding, plastic injection function.
- Q:What are the forming methods of rubber products?
- Calendering is the process in which material is subjected to elongation. The main equipment for rolling forming is three roller or four roller calender. The three roller calender is achieved by rotating the pressure of the two roller. When the rubber material passes through the roller gap, the rubber strip is expanded into a certain sectional shape under the action of pressure, or the process of gluing is realized on the fabric. It is used for sizing, pressing, spinning, gluing and gluing of textile and steel cord, as well as the laminating of film and film, film and adhesive fabric.The basic procedure of calendering process includes: mixing and preheating glue; fabric guiding and drying (and sometimes dipping); rubber sheeting in four roll and three roll calender on or in textile and rubberized calendering semi-finished products cooling, crimping, cutting and placing etc..In rolling before the need to preprocess the rubber and textile, rubber calender before entering, to turn it in the hot refining mill, this process is called thermal refining or preheating, the purpose is to improve the mixing uniformity of refined rubber material, further increase the plasticity, increasing the temperature increase high plasticity. In order to improve the bonding performance of rubber and textile, ensure the rolling quality, need drying of the textile fabric, moisture content control in 1% ~ 2%, the moisture content is too low, the textile hardens, easily damaged during the calendering, high water content, poor adhesion.
- Q:What are the causes of fracture in rubber products?
- If it is because of aging and fracture, this is a normal phenomenon, is not a problem in the safe use period, there is to pay attention to the storage environment, avoid direct sunlight, the best placed in the shade, not stored in a humid environment.
- Q:What is the pressure on rubber products during vulcanization?
- Usually, the selection of curing pressure need to consider several factors, namely rubber formulation, rubber plastic size, forming die structure (filling pressure, injection pressure, injection type), type of curing equipment (flat vulcanizing machine, vulcanizing machine, injection machine, injection of sulfur with sulfide vacuum machine etc.) and product structure features.
- Q:Half finished rubber film surface white is going on
- Rubber is a latex made from rubber, tree, rubber, and grass. It is made of flexible, insulating, impermeable and air. High elastic polymer compound. It is divided into two kinds: natural rubber and synthetic rubber. Natural rubber is made from rubber, tree, rubber, grass and other plants. The synthetic rubber is obtained by polymerization of various monomers. Rubber products are widely used in industry or in all fields of life.
- Q:Process for producing rubber products
- There are many kinds of rubber products, but the production process is basically the same. The basic process of rubber products in general solid rubber - rubber as raw materials including: plastication, mixing, calendering, extrusion, molding, curing 6 basic processes. Of course, raw materials preparation, finishing, inspection, packaging and other basic processes are indispensable. The processing of rubber mainly deals with the contradictory process of plasticity and elasticity. Through a variety of techniques, the elastic rubber plastic rubber has become the addition of various additives made of semi-finished products, and then through the vulcanization has semi-finished plastic and rubber products into high elasticity and good mechanical performance.
- Q:For the application of common synthetic rubber, not too long or too difficult, want to do
- Chloroprene rubber (CR) by chloroprene do monomer emulsion polymerization and into the polymer. This rubber molecule containing chlorine atom, so compared with other general rubber: it has excellent oxidation resistance, ozone resistance, non flammable, after the fire can be self extinguishing, the advantages of oil resistance, solvent resistance, acid and alkali aging resistance, good air tightness; the mechanical performance is better than natural rubber, it can be used for general rubber, also can be used for special rubber. The main disadvantage is poor cold resistance, large proportion, relatively high cost, good electrical insulation, processing is easy to stick rolling, easy to scorch and easy sticking. In addition, rubber poor stability, not easy to save. The temperature range of about - 45 DEG C ~ + 100 DEG C. Mainly used in the manufacture of anti ozone aging resistance, high cable sheath and various protective cover, protective cover; oil resistance, chemical corrosion resistance of hose, adhesive tape and chemical lining Flame resistant underground mining rubber products, as well as a variety of molded products, seals, mats, adhesives and so on
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Gasket High Quality SBR Rubber Ring DN1600
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
