FRP Pultrusion Machine with High Quality and Low Price
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 25 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
FRP Pultrusion Machine with High Quality and Low Price
Product Applications:
The products are widely applied to green house, skylight, porch, door, sandwich panel, and liner panels.
Product Advantages:
1. The main machine is steel structure, stainless steel panel, side panel is paint. With the two kinds of pultrusion modes: Debugging and succession.
2. Traction gantry makes ordered according to requested length.
Main Product Features:
1. Easy operation based on PLC intellectual control system. Only short-term training can make operators complete production independently.
2. Unique arithmetic on temperature control makes oven heating fast, temperature control precise.
3. System failure can be automatically alarmed and show fault point. Make maintenance easily.
Product Parameter：
Name | FRP Pultrusion Machine with High Quality and Low Price |
Product | FRP Machinery |
Brand | CMAX |
Size | 11*3.5*5 |
Delivery | 30-45 Days |
Material | Fiberglas Reinforced Plastic |
Technique | Pultrusion Process |
Warranty | 13 Months |
FAQ:
Question 1 : What is Pultrusion?
Answer : Pultrusion is a continuous low pressured molding process using fiber reinforcements and thermosetting resins matrices. The fiber reinforcements are drawn through resin bath or injected with resin in which all fibers are thoroughly impregnated with the liquid resin system. The wet-out fiber is formed to the desired geometric shape and pulled into a heated steel die. Once inside the die, the resin cure is initiated by controlling at precise elevated temperatures. The composite laminate solidifies in the exact cavity shape of the die, as it is continuously "pulled" by the Pultrusion machine, thus getting the name - Pultrusion.
Question 2 : Can any shape be pultruded?
Answer : Virtually any constant cross section can be pultruded dependant upon wall thickness and complexity of the cross section of the profile.
Question 3 : What are the most typical reinforcements used in the Pultrusion process?
Answer : Typical reinforcements used are fiberglass roving, continuous strand mat, woven and stitched fabrics. Other reinforcing materials such as basalt fiber, carbon and aramid fibers, which are more costly, can be utilized during the Pultrusion process to increase the modulus / stiffness of the composite member.
Product Pictures:
- Q:What are the processes and machines used in the manufacture of plastic products?,
- Processing methods are: injection molding, extrusion, blow molding, blister and so on. Injection molding can be used to produce more complex shapes, such as TV housings. It is the plastic particles in the pre heating tube, and then through the screw under pressure, the melting of raw materials into the mold, cooling molding, the product has been made. Is prepared by continuous extrusion screw drive, which in the feed pipe (commonly known as the barrel) heating plasticization, and then squeeze the stereotypes in the mold, the desired shape, such as plastic buckle, pipes etc.. Blow molding and extrusion are somewhat similar, except that they are placed in compressed air to obtain shapes, such as plastic films, plastic bottles, etc.. Blister is relatively simple, it first made of plastic sheets, baking oven, and then placed in the mold, through the negative pressure to the sheet and mold close to the shape. The price of the equipment varies greatly according to the model and specifications, so it can be checked directly to the manufacturer.
- Q:ABS plastic processing flow
- ManufacturabilityABS is an amorphous polymer with no apparent melting point. Because of its grades, grades, in the injection molding process should be based on the different grades to formulate the appropriate process parameters, generally in 160X: above, 270C can be formed below. Because the temperature is too high, there is a tendency to destroy the rubbery phase in ABS and begin to decompose over ZTOC. In the process of molding, ABS has better thermal stability, wider range of choice, and it is difficult to degrade or decompose. Moreover, ABS melt viscosity is moderate, its fluidity is better than the polyvinyl chloride, the polycarbonate and so on, moreover, the melt cooling solidification speed is relatively quick, generally in 5 ~ 15S can be cold solid. The mobility of ABS is related to both injection temperature and injection pressure, where the injection pressure is slightly more sensitive. Therefore, in the process of forming hand from the injection pressure to reduce the melt viscosity, improving the filling performance. ABS because of the different components, the performance of different water absorbent and adhesion, the adhesion and absorption of water between 0.2 ~ 0.5% and sometimes up to 0.3 ~ 0.8%, in order to get the products ideal for the drying process, before molding, the moisture content below 0,1%. Otherwise, the surface will appear on the silver bubble,.
- Q:The processing of plastic bottles
- Plastic bottle molding is the process of making final plastics from polymers made from synthetic resin manufacturing plants. The processing method (usually called plastic processing) (including compression molding), extrusion (extrusion) and injection molding (injection molding), blow molding (blow molding), rolling, to go through a total pressure plastic, extrusion, injection molding, blow molding, foam molding, calendering, etc. six processes.1 、 pressing and moldingPress molding is also known as molding or pressing, and molding is mainly used for molding thermosetting resins such as phenolic resin, urea formaldehyde resin and unsaturated polyester resin.2. ExtrusionExtrusion, also known as extrusion molding, is the use of extruders (extruders) to heat the resin continuously through the mold extrusion of the desired shape of the product. Extrusion is sometimes also used in the forming of thermosetting plastics and can be used in the moulding of foamed plastics. The advantage of extrusion is that it can extrude various shapes of products. The production efficiency is high, it can be automated and continuous production. The disadvantage is that thermosetting plastics can not be widely used in this process, and the size of products is prone to deviation.3, injection moldingInjection molding is also called injection molding. Injection molding is the use of injection molding machines (or injection machines) to inject thermoplastic melts at high pressure into the mold and to cool and cure the products. Injection molding can also be used for moulding thermosetting plastics and foams. Injection molding has the advantages of fast production, high efficiency, automatic operation, and complicated shape. It is especially suitable for mass production. The disadvantage is that the equipment and mold cost is high, the injection molding machine cleaning more difficult.
- Q:what kind of machines, where to buy, how much money should be invested?
- The production of plastic pots, plastic barrels and other products need to purchase plastic injection molding machine and the corresponding mold. Plastic injection molding machine type selection according to the production of plastic products, forming the shape and size of area, generally should choose the plastic injection molding machine 1000 grams ~3000 grams, the price according to the injection volume, the degree of automation vary between about 20~50 million.
- Q:What kind of equipment does the plastic product factory need?
- The current plastic, if the raw materials and semi-finished products are relatively low profits, it is recommended to do directly in the above color printing, the added value of high.
- Q:How many venues will it take? How much does it cost?That's what recycling plastic bottles break. Sell again.What's the machine and how much does it cost? What should be done after breaking? If you make a semi-finished product, you can't sell it wellIs there any profit on this line?
- Small production equipment price corresponding -300 HuaSu Fei Yang machine,I was prepared to PET mineral water bottles by color sorting (bottle, cover ring, trademark, water drop), production processes: sorting - crushing (grinding) - Cleaning - drying - bagging, processing in such a manner as to sell 7! No difference, the corresponding price and production equipment prices are 10000 yuan distinction, processed products sold to the product factory, --1PET mineral water bottles, broken pieces (crushed) and PP material broken fragments (crushed) can be done with the same machine!
- Q:Would like to ask a few questions?1, waste plastics need to go through a few devices or steps to become plastic particles2, how much would it cost for the whole set of plastic particles? (I want to get a small wire first)3, if the equipment, plastic material can be any processing?4, is there any pollution in the whole process?.5, how about this prospect this year?Please have experienced predecessors to give some experience
- 1, plastic pellet production equipment need: crushing machine, cleaning machine, dewatering machine, feeding machine, exhaust type extruder, granulator etc.. What do you look at the material, the demand for automation which decided to do good on machinery, extruder Jiaqieli machine is good.2, the whole set can be between 2-3 and 20-30 000.3, equipment is not what material can do is do what you don't need not yield white, but in general a set of general plastic can do.4, the entire process will have air pollution, dirty cleaning, there will be water pollution.5, this year to do this prospect is not good! What line is it about now?.
- Q:Who knows Guangdong province processed waste plastic particles Factory where. Thank you
- Yes, they do more, and each place has a different salary.
- Q:What chemicals should be used in plastic products?
- Additives mainly in the following categories:OneAntioxidantsAntioxidantUnsaturated double bonds in plastics are absorbed by oxygen atoms, heat and lightCaused by breaking, resulting in free radicals, which cause a chain reaction, so that the molecular chain scission or formation of chain cross-linking,Resulting in lower or weaker strength of plastic products. The function of antioxidants is to delay the oxidation of plasticsBreak down and prolong the life of plastic products. The antioxidants used in the plastics industry can be divided into functions: (One)Inhibitors of oxidative chain reactions, such as alkylphenolAlkylPhenolButyl tolueneButylatedHydroxytolueneAbbreviationBHT) aromatic aminesAromaticAmines) phenyl - -B-Resistant amine(Phenyl-B-Naphthylamine), were of Kun (AlkylQuinoneAlkenyl bisphenol A(AlkyleneBisphenolAlkyl phenol sulfideAlkylPhenolthioetherSalicylic acidBenzene fingerPhenylSalicylateAnd so on) etc.. (
- Q:I don't know how much money it needs! Raw materials are used plastic baskets!
- Production of this material, a basic set of machinery and equipment investment of about 70 thousand, if the amount of large, you can choose to configure the machine at around 200 thousand.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
FRP Pultrusion Machine with High Quality and Low Price
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 25 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
